Added: 2 years ago
From: GamerGuy51
Views: 21,076
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (120)

Sign In or Sign Up now to post a comment!
  • will it lose data like game saves and dlc maps content if you do this?

  • @JRRCherry369 no, data is on the hard disk.

  • Hey do u have a website I can purchase the lazer from. I have the 60gb ps3 CECHAO1

  • @SicilianHitman84 ebay ;)

  • Thanx Dude, i tried to help out my neighbours kid and infact all it needed was a bit of rubbing alcohool and a qtip to clean the lens and it was good to go, A1 :)

  • Do you have to buy a new laser when you switch it with the broken one?

  • At 2:33 it said that we could just use a qtip with some alchol on to clean it. How can i do that without damaging the laser

  • @TheOpicus don't worry it wont damage it, just be gentle. ;)

  • hey how do u reset the led?

  • @nguy3nb0i you can't when its broke its broke.

  • were did you buy the laser mine just went out today ='[

  • hey i have a junk 40 gig non bw compatible and a ps3 80 gig that is bw compatible.the 80 gig wont read the games or movies...can i take the eye out of the 40 gig and put it the 80 gig to fix the 80 gig disc read error...i know that the 40 gig eye works let me know asap

  • at 2:58 the wire he is talking about is the sensor wire. It costs about 6 dollars to replace so dont get scard if u do break it lo :)

  • i like how he says u can not purchase security torx bits in hardware stores. hmmm where did i buy mine at then? I work for a glass company and they are required to removed saftey glass in the courthouse.

  • Im Trying to fix my ps3 and when i get as far as looking at what the laser does im stuck. When i insert the disc it just does one 2-3 second red flash and thats all it does. Any idea what that means? Do i need to clean it or replace it? thanks

  • I have a question no one has been able to answer yet, hope you can help! When I opened my system, I was flipping through a few different video guides on how to do it, for cleaning etc...When I tried to take my Blu Ray rive off, the cable ribbon isnt held on with a clip to the bottom of the drive, like ALL of the ones I could find in any videos. My cable ribbon is TAPED on to the bottom of my Blu Ray drive, and Im not really sure about removing the tape. Please help if you can, thank you.

  • @MissLaazlo just rip it off carefully you'll be fine. worse you can do is damage the cable and buy a new one for 6 bucks on ebay.

  • @GamerGuy51 You actually can get the Security Torx at a hardware store. Go to Home Depot they have a set for like $6. All security. There is a set T4-T10.

  • @MissLaazlo Mine is the same, Ordered a "working" drive off ebay and noticed the differences right off the bat. All the videos online are showing a diff sys than mine. Mine has a plastic power supply, the disc drive dose not have the optical sensor on the top and the disc drive logic board is internal. So "new" drive is on return and I dont want to do this again if they are just going to send the same part.

    When troubleshooting the original drive, I found that when a disk is inserted, ---

  • @vdubvance The blue ray will come on and the disk spins for less than a second and stops. Now here's the kicker, when a disk is inserted with the white magnetic bushing removed, the disk will rev up and the blu ray will start lighting up as if it wants to read. so motor works, lasers work... any ideas? maybe my lens is out of alignment? I'm having bf3 withdrawl's bad.... Burnt right after download of new maps.

  • the ps3 slim is different

  • @MrLukeNguyen no shit...

  • where do i get a ps3 laser from ?? :S

  • He didn't put back the clip he took off @ 3:24 ?

  • @tubevzn yeah, i probably put it back later, but believe it or not you don't need it there, the bar over the top of it holds it down as well..

  • i done all that and it still want read any discs i put in . when i put a disc in it flashes blue then starts to spin but it never loads. what can i do to fix this ?

  • I'll try the screwdriver, but I'm sure no one tried to open it, as the seal was still on the machine and the screw looks to be in perfect shape, it just looks miscast very slightly.

    Hope it works!

  • It was definitely a security bit, had the hole in the end. One thing I noticed is that the screw had the security 'bump' but it wasn't near centered so it would likely have been impossible for me to use the security bit anyways. Wonder if the screw in mine is faulty or if it was done purposefully by Sony?

  • @JoyousOblivion sounds like another dude tried opening it. also, don't worry about it, just use a flathead that will fit in the hole...open sesame!

  • No matter what I try, a #10 Torx security bit will not fit into that initial hole...

  • @JoyousOblivion are you sure its a security bit? a security bit has a hole in the middle, does yours? otherwise use a flathead that will fit in the slot, that works too.

  • Hey on mine purple tell me I need a new leaser but where can I buy it mine is a 40gb ps3 and where can I buy a leaser

  • @kevin18055 eBay, search PS3 laser

  • thanx for the info

  • Whats the first song??? And nice vid 

  • @yippekaiyaymfckr sick of it. cage9

  • my ps3 laser does three blue flashes is that good?

  • @airsofter4life14 blue(bluray), red(dvd), then none(cd).

  • where do u get the laser from again?

  • @tajahksmith07 gamepartswarehouse

  • Hey guy, i'm about to sub and like this vid. I just followed your tut after receiving my lens and it all worked out perfect. I had a bit of a scare when i forgot to replace the the white magnetic cap but as soon as i did the disc started spinning properly and now i'm enjoying my 3 once again!!!

  • @jowell8891 thanks!

  • hey mate.

    when you say reset the lid. do you just mean keep moving it around?

    or do you mean take the laser of the rails and put it back onto it??

    thanks

  • @tickno sometimes the lid doesn't sit on the track properly, usually happens with 40gb and 80gb for some reason. Just keep doing it over and over and adjusting approach angles. lol. you'll get it eventually.

  • when i put the disc in the check the lens it doesnt spin.. should it? what should i do?

  • @ingalaj needs new laser.

  • @GamerGuy51 thank you

  • @ingalaj no prob

  • Comment removed

  • Comment removed

  • i guss i need to go to home depot and get them tools to fix my ps3 lener

  • @ps3scooby just a small flathead to remove that security torx. and #2 phillips

  • Hey i have a CECHG01 ps3 40 gig and i was wondering if you could direct me where to buy a replacement blu ray laser and what would be the name of it

  • @LilMoney00 its 400aaa google it ;)

  • Comment removed

  • Comment removed

  • Fuck this, im taking it to the chinese people

  • Comment removed

  • Hey please respond to my question:)

    I had this blu-ray disc problem and it showed that it was loading a game but the game didn't start, so I removed the blu-ray reader and replaced it with a new one. But now it doesn't even show that the game is loading? You know what the problem is?

    I thank you A LOT in advance lol:)

  • @xQNS you need to get the logic board from your old drive and swap it with the new drive. thats why its not reading. the boards are coded to work only with 1 playstation.

  • make sure when changing the BD laser that theres NO DISC in the drive... most people make this mistake and than have to reallign the loader mech.

  • I've gotten to the point where you test the laser by putting a disc in. My disc does not spin when I insert it. Is this still a laser issue?

    Thanks! Going good so far, just not sure the laser is my problem.. :(

  • @QuxERM btw the cd would continue spinning and work unlike the ps3 game

  • Comment removed

  • Comment removed

  • Comment removed

  • sorry to bobard u with messages lol

    okk in ur vid u say use a qtip ??

    wat is it ???

    and wat sort of alcohol solution should i use ??? many thanks luke

  • ok i just checked lens like in the video shows.

    ann all that happens is i see a light for the first 5 seconds then nothing disk not spingin either.

    but the colour of the light is like a puple ???

  • ok thanks for your reply mate. ok i got mine apart now i just wanted to no how to test the laser b4 i replace it just to make sure it is the laser.

    mice video btw :)

  • hi i jus got the disk read error and now my ps3 not reconizing any games in the drive jus not poppin up in the menu.

    could i replace the whole disc drive in stead of jus doin the laser or are they coded like on the xbox ???

  • @domio1986 yeah their coded. you could replace the drive and keep the logic board but you'd be wasting money....most ps3's drives are fine. they just need new lasers or lenses.

  • hey, ever since "the glitch", my ps3 freezes when playing games. i've gotten the 80010514 error code. do you think this will fix that before i go opening my ps3?

  • what if you only see a blue light?

  • @RushforLifeMW2 that would mean your lasers dvd diode is out.

  • BTW ive seen 10 videos today and this one is clearly the best

  • Removing the cover is a hand full for me -_- i have a normal T10 but anyone have tips on how to remove the peg on the screw? u think i only removed a part of it cause the middle is dark but theres still a tiny lump

  • lol i might be buying a ps3 that wont read games, could this be the reason if so than that ps3 is all mine lol

  • Is this what primarily goes wrong with PS3s? So if I buy a broken one off the net I'm likely to be able to follow this tutorial to finally have one of these things?

    Thanks for what you do! You helped me perfectly restore my previously non-functional NES!

  • Where can u buy the size 10 torx bit?

  • can't we just replace the whole blu ray thing?and could you explain how could we know if it needs cleaning?

  • nice tutorial. by the way my ps3 can't read any games, dvd, cd, blu-ray, anything. do you know what laser do i need? my ps3 is the 40gb

  • probably a dual eye. i would open it first. some 40's have singe eye lenses.

  • can you install a duel eye 410 into a older single 400 version

  • the disk wont spinning?

  • hey just wondering where you got your replacement laser from and do they do international postage I'm from New Zealand

  • some sellers on ebay that sell in the states. i'd recommend using the nz ebay or buying from a seller in china, should be less than 70usd

  • I followed all the steps,but i guess i kind of broke that holding piece at 1:17 and now the drive system it kind of not connected to the main system. The The disks do not go in automatically and they are not read, even though i kind of taped that holdin piece to the flat cable. Do u think thats the cause? Any advice or help?

  • that clip is a magnet for newbs for some reason they always break it. u just use a fingernail to pop it up gently not pry it off with a screwdriver...lol

  • I love how you say rip off the warranty sticker

  • USPS would charge $10.50 for priority mail if you use the medium flat rate box and even cheaper depending on where the person lives if you use parcel.

  • cant you just get a new blue-ray dive ??

  • no you cannot

  • great stuff

    real great stuff

  • does this happen to most ps3's? or is it rare for it to happen?

  • i've been doing a lot recently, but overall its not a huge issue, mostly with older ps3's

  • ok ty cuz im planning on buying one this month :D

  • Another great vid man, you really need to open a repair shop.

  • i have three...lol

  • lol I mailed you once about a repair and you said no. xP

  • it can get expensive shipping systems back and forth. so i don't usually like doing it.

  • lol whats the song?

  • @dstructor7 cage9 "planet me"

  • @GamerGuy51 k thanks dude hey if im getting a 360 do you think i should spend the xtra 100 bucks to get an elite?

  • get the cod xbox instead!

  • @GamerGuy51 where can i get me one of those lol

  • they come out the same day as the game. the elite is really only worth it for the disk drive and the color, other than that it comes with low def cords and no extra stuff...

  • Nice vid man! ill use this if i ever run into problems.

  • Lol nice

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more