New toroidal wire hho generator

[cenedywong]

Good, I like that you share this video, I wish success always New toroidal wire hho generator

[jocell202]

Check out my save money on fuel with one wire vid, who needs a cell when you got a rad full of the water.

[melisantika]

Nice Video That You Share , So Very Nice Thanks You New toroidal wire hho generator

[Onepissite]

I Really Like The Video From Your New toroidal wire hho generator

[pemburuiklan]

Your Video Is Very Useful Sharing pretty cool near the end theres an explosion apparently baking soda can catch on fire and explode

[hollandampsguy]

he has it on top of the battery ..!! that is a NO NO!!!

[prototype9000]

@hollandampsguy that just adds to the fun if i short it out

[theoneagain]

wtf



[prototype9000]

@theoneagain whats that about

[legogunguy001]

You need less voltage, it is what is making it so hot.

[prototype9000]

@legogunguy001 not really was just poor connections

[electronicdawg]

Aluminum does oxydise and it will also burn rite up. That's why we use SS.

[prototype9000]

@electronicdawg this cell has been working for me just fine ever since i made this video a few years ago just keep the aluminum cathode and stainless steel anode

[iaguiar186]

Que gambiarra cara .

[ILBCNUn69]

make sure you breathe in all them chlorine vapors...

[miguelspeedy]

es un delirio ,. de improvisacion,. HORRIBLE,.

[prototype9000]

@miguelspeedy dosentmatter how it looks only matters how it performs besides does any prototype of a machine or product ever look professional 

[theonethatgoofs]

Be carefull with the aluminum the reaction can take unsafe things out of it.

[levettp]

Nice work. You should keep on experimenting with this!

[prototype9000]

@levettp i gave up on hho stuff gone into different avenues of research ill make them for anyone whow ants one though

[IcechickenSr]

Cool. Deffinatly braze up those joints and conections so you have good connections and you might lower consumption a little, at the very least reduce some of that heat. Interesting design. IC.

[sparten1114]

no corrosion but you pull out the silicone it will make a mess.

[Wildatheart73]

are you nuts?

having a bad connection with all that gas can make a spark and go boom.. you are really doing it in a dangerous manner.

[prototype9000]

@Wildatheart73 in an open container theres a really low risk of injury or death just makes a small crack water flys around thats it

[spawn2882]

@prototype9000

Yes but if you use that unsafe model, in action in your car, having the sealed container may EXPLODE! Now for testing purposes, with no cap almost any cell can be safe, please use properly gauged wire's and do more research before you put your fuel cell in an air tight container.

[prototype9000]

@spawn2882 i allways put coat the connections so theres allways a good connection when in the water that greaty reduces the risk of sparking

[Wildatheart73]

@prototype9000 Even in open container if the 2 gases mix it can explode violently. I know this first hand.

[prototype9000]

@Wildatheart73 hho will not explode unless you are mixing pure hydrogen with oxygen its allready partially bonded to a monoatomic form of oxygen. if it did what you say it would then i should have a steady flame coming out of a hho generator. or one big explosion to end all

[Wildatheart73]

@prototype9000 Doesnt oxygen come of one lead and hydrogen off the other?

How are you keeping these from mixing?

[prototype9000]

@Wildatheart73 just dos ome more research and watch the videos for hho on youtube and see for yourself that not one of them are exploding on there own. and do some research about hho not just plain hydrogen it will help you better understand

[Wildatheart73]

@prototype9000

I know they dont explode on there own however you are making hydrogen and oxygen which are mixed together. Any chemist can tell you that can be very dangerous. It only needs a static spark to explode. by the way those electric hho generates are useless for increasing your fuel millage. Its been proven again and again its not efficient in anyway whatsoever.

[prototype9000]

@Wildatheart73 gasonlie only needs a static spark to where did i mention that imusing it to increase milage. andt here are technologys out there my video is not one of them that generates way more gas output than energy put in. dont relly so much on books and teachers for information chances are most of it is 100 years out of date

[dmgcat]

@Wildatheart73 No it hasnt been proven over and over again as you say. You are another half wit disinformationist that hasnt done any homework on the subject just go bury your head in the san.

[Me102288]

@dmgcat lol you must have you head in a hole or you woulda learned by now, thousands of ppl are use'in hho generators to boost GASOLINE so its more effeicient, so far we can only run engine's under 2500 cc's entirely one hho, till we get more hho outta these things.. and getting hydrogen and oxygen out of water is proven. gasoline is flamable... hho is explosive...

p.s. combustion engine's run of both doofus lol

[dmgcat]

@Wildatheart73 Another thing is that the company in New York is doing the boosters as a catalyst to burn the fuel more efficiently. The company used researchers at Purdue University to test the efficiency. Go research it yourself then write something on the subject.

[theonethatgoofs]

@Wildatheart73 efficient if u use solar on the car to charge the batteries in the trunk that run the generator sep from the cars electrical system .hoh but ive only tested this in db. of explosion. i was fig louder bang more power . i could be wrong ; )

[ShayIsQween]

@Wildatheart73

I have a 2002 saturn sl2 that gets 48 mpg boosted up BY HYDROXY GENERATORS from 35 mpg. Try it and then say that its impossible. Do you really think that there are hundreds of people on many forums just bullshitting you into wasting 8 dollars and an hour of your time? What would we possibly stand to gain from that, think about it.

[prototype9000]

@ShayIsQween ive seen it work for peoplein reallife cant argue with the results except for the way they measured teh results it should be done on a dynometer. and the maths houldbe done correctly

[a2zhandi]

@ShayIsQween stop playing with the trolls ;-)

[lastkiss84]

whats the LPM?

[prototype9000]

@lastkiss84 this one in particular got about 1.5 to litres perminute depending on the electrolyte used

[bcdigit]

citric acid people try it..also 316 stainless screen works great

[prototype9000]

@bcdigit one of the wires is stainless steel the other is aluminum works great no need to change something that allready works great.

[noath5776]

lol dont think it is the baking soda that exploded. You had the connection out of the water If that sparks the hho burns .

[prototype9000]

@noath5776  it wasnt hydrogen being burned it was definatly the caked up baking soda if mabe i was passing a few thousand volts then the hydrogen would have exploded

[onecraftydude]

Nice water heater.

[karschok9]

hi prototype9000 , may you tell me how you build that toroidal coil? could i build it? can you please pass the diagram to build one like that you made? im gonna wait your answer ! :D

[prototype9000]

its really easy to build just take a 2 inch pvc pipe like i have there and cut notches on each end for the wire to sit in so it dosent move around.Then take aluminum wire for your negative electrode the twist a few stainless steel wires together for your positive electrode secure them some hose then thread the pipe put the wires on the grooves you cut sot hey dont slip and short out thread the wires in and out alternatly. stinaless steel next to the aluminum

[prototype9000]

dont mind the see thru parts i only cut away the sections with a dremel tool for an older experiment. i have afew other videos same setup but the pvc pipe isnot cut up

[fuelban]

Ok, its just that a cell being acidic in nature, the alloys corrode/get eaten, if you put aluminium foil in a cell you can see this effect happen quite fast, the foil rots, and thicker aluminium does the same but over longer periods of time, so

Interesting tho.

Thanks.

Thom.

[prototype9000]

actually the ph of teh cell after adding a little vinegar a few drops and baking soda is alkaline about a 12 on ph scale. i add no acids

[fuelban]

hi, guy.

dont you find the alluminium, will decay in this use, as it is converted in to hho its self, ?

thom.

[prototype9000]

ive never had it decay yet as long as it is the negative electrode idont have problems if i used lye or hydrochloric acid then it would decay. i have someone who has been running this cell in there truck for a few month now and hasnt had any problems yet

[DancingSpiderman]

@ 1:47 That looks like a LOT of HHO being generated there!

The water was dissipating the heat from the unit while it sat in the water. At the end of the vid, the HHO Generator is sitting out of the water and is still turned on, but the air wasn't dissipating the heat fast enough, so that's why the baking soda that was caked on the unit caught fire...woah