rented one of those the last time i was at the range. may be the best pistol i have fired in a long long time. it is a great improvement of the xd series.
If you did just a little more reseach on your own gun you would know that you don't have to hold the slide back. Proper procedure is to use the slide lock and lock it back, THEN rotate the take down latch to the up position. Good vid otherwise. Plus it might make it a little easier and you wont scratch your slide.
Why so many comments on the southern? Thanks for the information of products and on how to clean this bad boy!! Keep the info comin brother and thanks again!!
Melonite finish, not parkerized, but still an informative video. I am ordering one today and can't wait to shoot it. What other pistols do you own (what is that in your holster in the video)? And how does the XDm compare to others?
I had never shot this gun before, but heard very good reviews about it. My Dad and I were deciding whether to but this one or the USP 40..so we wen to the range and tried both..I still prefer the way the USP 40 shoots, but he ended up buying the XDM instead, very nice gun I must say..plus it's 200 bucks cheaper than the USP 40.
I have to agree with wookerton. The manual clearly states that the slide should be locked back before the break down lever is flipped up.
Also, I woldn't advise anyone who is watching this video to just whipe the slide off of the frame as he does in this video. The pinky and ring finger should wrap around the recoil spring as you slowly pull the slide away. That sping is under tension and could easily come loose and cause damage.
when you are pulling and holding the slide back so you can switch the take down lever up, it dont understand why you dont just lock the slide back. it was designed so you just lock it back and switch the lever up. let the slide go forward slowly, and then remove from slide. learn how to dismantle your gun correctly before you make a video showing the wrong way how to do something. its common sense.
guns suck. mudjihadn
larukulunaseas 5 months ago
Thanks for the vid! I just purchased the XDm-9 compact and was researching some good cleaning routines. Moving on to part 2...
- Ken L, Oklahoma
kenmleck 1 year ago
thanks for the vid man i just subbed
AdoreYouInAshXI 1 year ago
Better way to clean the XDM is to piss on it and throw it in a river, they blow
68rapes556 1 year ago
@68rapes556 Please go die noob.
TheDubDoubt 5 months ago
This has been flagged as spam show
@TheDubDoubt lick my balls you dont know shit about guns
68rapes556 5 months ago
@TheDubDoubt hes prolly one of those glock happy dudes, they hate when good guns come out...
jsanderson88 3 months ago
jeasus i could have cleaned it and got it dirty again by the time you got to actually cleaning it
resqjason2 1 year ago
rented one of those the last time i was at the range. may be the best pistol i have fired in a long long time. it is a great improvement of the xd series.
bmstylee 1 year ago
I can use this vid to as a reference to clean my xd-9 right ( I don't have it yet but it will be mine)?
undecided8713 2 years ago
Great vid. Alot of very useful info man. Thanks for posting.
chanderson1 2 years ago
If you did just a little more reseach on your own gun you would know that you don't have to hold the slide back. Proper procedure is to use the slide lock and lock it back, THEN rotate the take down latch to the up position. Good vid otherwise. Plus it might make it a little easier and you wont scratch your slide.
Squ1bst3r 2 years ago 4
hahaha storing ammo and gun in the same case? haha that's legal...
squrelbate 2 years ago 3
It's legal where I'm at. I'll keep ammo wherever the hell I want. ; ) Doesn't mean it's safe (if there are kids around)
SaintPatrick33 2 years ago 2
Why so many comments on the southern? Thanks for the information of products and on how to clean this bad boy!! Keep the info comin brother and thanks again!!
9mmFitsmeBuddy 2 years ago
This comment has received too many negative votes show
GLOCK!!!!!!!!!
Sincerely,
Glock fan
Navysealeggo 2 years ago
Excellent and informative video, thanks!
grayphox 3 years ago
Melonite finish, not parkerized, but still an informative video. I am ordering one today and can't wait to shoot it. What other pistols do you own (what is that in your holster in the video)? And how does the XDm compare to others?
CmdrKeen 3 years ago 5
I had never shot this gun before, but heard very good reviews about it. My Dad and I were deciding whether to but this one or the USP 40..so we wen to the range and tried both..I still prefer the way the USP 40 shoots, but he ended up buying the XDM instead, very nice gun I must say..plus it's 200 bucks cheaper than the USP 40.
gowdaflow 3 years ago
This comment has received too many negative votes show
"See hier ahhhhh,hmuuuuuunhg.....I have menaged to misplace die magazine loader...ahmmmm....but I just...I just store my extra rounds in there..."
You are so American!
Hilalrious, I wached it ower and ower again
Are you Cheef wiggum from "The Simpsons" !?
Five stars!
mfilip62 3 years ago
Nope! But I "shurrrre" sound southern on video!
ALbulletboy 3 years ago 5
This comment has received too many negative votes show
Not as much actually!
I saw funnier talking southerns,the most funny is when they pronounce "shell" it sounds like brief version of prolonged "sheeeeeejjjll"!
But still funny!
Enjoy your gun,best one money can buy for now.
And yes,be safe,don't menage to "shaaaotthyourseeeeejlf" as you managed to misplace a magazine loader.
mfilip62 3 years ago
ummmm ahhh.... did i mention ummmmm .. ahhh.. ummmm. BTW ummmmm
Mrrr305 3 years ago
Ummmmm aaa ummmmm aaaaa ummmmmm aaaaaa
grimus200 3 years ago
I have to agree with wookerton. The manual clearly states that the slide should be locked back before the break down lever is flipped up.
Also, I woldn't advise anyone who is watching this video to just whipe the slide off of the frame as he does in this video. The pinky and ring finger should wrap around the recoil spring as you slowly pull the slide away. That sping is under tension and could easily come loose and cause damage.
blueorb 3 years ago
when you are pulling and holding the slide back so you can switch the take down lever up, it dont understand why you dont just lock the slide back. it was designed so you just lock it back and switch the lever up. let the slide go forward slowly, and then remove from slide. learn how to dismantle your gun correctly before you make a video showing the wrong way how to do something. its common sense.
wookerton 3 years ago