BMW E60 530xi 19" M6 Style wheels installation by Cartreats

[artasriyans]

Hey i am looking to buy the same set (non staggered) for my XI where do i buy those in 19" not staggered? thnx



[horatium16]

you got it wrong with the tirese. You should have taken 245/40 r19

[countryboyG]

hey everyone i just bought a set of 4 sr racing wheels series sr5 and one of them is cracked they are 19x7.5 with a 5x114.3 bolt pattern does anyone know where i can find another one? D: they dont make them any more and i cant find one anywhere! D:

[rauchentoetet]

This mechanic is now working for Formula One World Championship :P

[JUNIORMICH]

when you put rims on your shit it is supposed to make it look better. im just saying

[vrmmpsshhh]

YOU GUYS WILL NEVER TOUCH MY BMW!!!!! AT 1:30 LOOK AT THE HAMMER!!  YOU HAMMERED OFF THE STOCK WHEELS CAUSE THEY WHERE STUCK, I KNOW THAT'S HOW IT WAS USE.... YEAH VERY PROFESIONAL... NOT!!!!!!!!!!!!!!!!!!! YOU KNOW THEY SELL A SPECIAL TOOL SO YOU WHEN YOU TAKE WHEEL BOLT OUT YOU THREAD THE TOOL IN PLACE AND THE WHEEL WOUNT FALL OFF THE HUB IT ALSO MAKES IT EASIER TO PUT IT ON YOU DONT HAVE TO ALING THE WHOLES!

[lightningmotorsports]

Can anyone say TORQUE the lugs correctly. Thanks for the warped rotors...

[FOXDIEPATRIOT]

Lil bit to small

[HDTalento]

Good vd.Greetings!

[inktoxicated]

bmws dont have wheel studs

[MrHarlemworld]

SORRY SIR YOU ARE MISINFORMED,YOU CAN HAVE A STAGGERED SETUP ON A XI.PLEASE DO YOUR RESEARCH.

[Jonathan5706]

i dont think the installation guy should be using just one front jack to take off both side rims... couldnt the car tilt back?

[quizex]

Love the design of the rims, I have the same ones but not on BMW, sorry fellow, gotta be embarrassing for the Tire Guy to work while filming...

[dmdjm]

i'll give u 2 stars. they look actually a bit small for the 5's, u should get 20's. after doing that have it lowered. or else it would just like a regular family car w/ new mags.

[oldirtybastard213]

those arent fuckin 19"

those are 17 or 18"

gtfoh with your replicas

[biggurs]

@oldirtybastard213 i agree....... they look no more than 18 with low profile tyres........ it doesnt suit the car. it actually looks as if the rolling diameter may even be less than the old wheels!!!!!!!!!!!!

[bhsoupa]

wow i have these wheels on my 3 series e90 and it looks super sexy... but on that 5 series there... um... no... the stock wheels actually looked nicer.

[lilpainwayne]

looks nice but think about a lowering

[fuckinwok]

19'z look small on this 5 series. You shuda saved up 4 20'z... or get the m sport bumpers.

[MrPANOSZOZ]

how does the stupid stupid tyre worker hit the wheel of this bmw 5.he is really rude and somebody should teach him real manners!awful

[inktoxicated]

needs a drop

[inktoxicated]

nice wheels 19s r still to small looking. 22s look good but u run into fitment issues so 20s r prime

[cartreats]

The customer loved the ride,

[madpaddy73]

thinking of getting 19" but a lot of people say its too harsh a ride?? whats your view?

[Transane]

no offense, but if you guys are going to be kicking the wheels off, i sure as hell wont be going to you guys for a new set of rims.

[cartreats]

By your comment. i know you do noy know thing about wheels.

[Transane]

@cartreats your right. i usually spend my time blueprinting motors, working out how much lift and duration I want for my street cams, then when I'm done doing that I may take some time to undercut my gears on my transmission so that i dont miss a gear when shifting.

but wheels, man, with their offset, diameter, and width... just too much for me to understand. *rolls eyes*

[XMG3]

@cartreats it doesn't matter if we know wheels or not, seeing you kicking it off the car is not something we don't want, we are the customer, so by your answer, i know you do not know how to treat a customer.

[XMG3]

@cartreats it doesn't matter if we know wheels or not, seeing you kicking it off the car is not something we want, we are the customer, so by your answer, i know you do not know how to treat a customer.

[mjasim1]

@Transane i have an e60 (the same car) and when i had my wheel removed, the guy got underneath the car and pushed it off, unlike this mechanic who doesn't seem to know what he's doing, im sure he's caused some minor scratches ... or some other sort of damage

[biggurs]

@Transane by your comment it looks like you have never taken an alloy wheel off!!!!!!!!!!!

it gets stuck/welded on anf 99.9% of the time you have to kick it off or use a mallet or your head!

[Transane]

@biggurs not true. i have removed many many alloy wheels. yes, alloy can get stuck to steel studs. but kicking them can damage the stud threads, as well as bend them if enough force is used.

ive never had any problem getting them off by grabbing either side and wiggling it until it breaks loose. if it needs to be taken off with more force, a GENTLE kick on either side to break it free does the trick.

also he didnt check nut tension using a torque wrench.

[biggurs]

@Transane actually i agree with you!

[Transane]

@biggurs oh, and for the record, my spelling was perfect, besides forgetting an apostrophe on the "wont"

[roofcrash]

awesome car, nice looking rims!! how much did you tip the guy ?

[bushehri82]

Has become a wonderful

[cartreats]

Rhis is a E60 XI, (4wd), you do not stagger an xi

[Bmw51474]

Yah, you can stagger an xi. Alot of people have done it.

You Dont kick tires off! You only did that because you dont know how to jack up a car. LOL. Mann you guys are dumb for posting that vid. Hitting it from behind with a metal hammer? LOLx2 Use ur muscles dammit! I would never bring my car their.

[peterdoubleyouz]

@cartreats Incorrect, you actually can stagger an xi, one of the wheel options offered by BMW was staggered on the xi.

[mrleghari]

all for tires are 245/35/19??

not 245/35/19 and 275/30/19??