after doing this, my old phone keeps having the red light and saying that it has no power. but then i have it connected to the charger right now and it won't power up, and i had a full battery before i started this. wth?
i literally tried EVERYTHING, moving the file, different usb ports, different versions of rsd lite (4.6-4.9), but nothing worked. NOTHING. then i decided to use the newest version. it worked like a charm.
Is there any way I could get you guys to delete this video? I post (and host) information about the Motorola A855 (Droid 1) phone, and this method for rooting it is so old, it should have cobwebs on it.
No offence intended, but it suggests the use of the file SPRecovery_ESE81.sbf which will at this point cause nothing but problems for most if not ALL Motorola A855 (droid 1) phones since they have all now been updated to a much newer version of Android.
forgive my newb-question: but does this process only apply to the Motorola Droid? i have a Samsung DROID Charge...and this seems to be a MUCH easier process to gain root access than the "standard" rooting of an Android phone.
@markdanielmiller - note: i should have watched the entire video before posting. sorry - a bit of excitement caused pre-mature posting :P
so - this is obviously rather focused on the Moto Droid (or, perhaps you could use the same procedure on any Droid phone that has a physical keyboard - but i'm not sure if the software being used is Moto-specific).
that being said, my question is actually "is there a similar procedure to this that can be used for a non-Moto Droid (ie - my Charge)"?
I think I may have bricked my droid, the boot screen keeps replaying...I'm trying to use RSDlite and flash a 2.2.2 back onto my droid..it keeps giving me FAILED..any help?
For anyone wondering what to do when the File Details do not fill in after selecting the sbf file this is what worked for me. All I had to do was move the sbf file to the root C: drive. Everything worked prefect then. I am running Win7 32-bit.
my droid x is stuck in a boot loop after i tried to install gummy jar ROM from ROM Manager. do u have any idea how to fix this? i would appreciate it very much
Can't flash my milestone anymore.. After few good flashes, RSD lite 4.6 / 4.7 or 4.8 shows the message "PHONE IS NOT COMPATIBLE WITH MULTI-INTERFACE SUPER-FILE (0X703B). SPRecovery didnt work too.. Any ideas???? Im using now android 2.2.1 canadian ROM (telus).
Im trying to downgrade from Android 2.2 to 2.1 using CyanogenMod 6.0, Build Number FRG22D as my phone will not reset or load any new Mods or Mod updates...I researched it online and I've already loaded the32 bit for my computer, run RSD lite as an adminstrator and just went to the link to download SPRecovery_ESE81.sbf but the problem I have is that the SPRecovery_ESE81.sbf does not show any file properties when using RSD lite 4.6.....I need to get this corrected ....Have any suggestions...Thanks
Thanks for the awesome video, this is reflashing with rooted 2.1 is EXACTLY what I need, but this doesn't work on my Droid X. Do you have a Droid X tutorial by chance?
my phone updated to 2.2 yesterday. I wanna root it now thats running 2.2, will the SPRecovery file be the same? when i ran it the info under the file properties did not come up. plz help
ive tried this one and the other video where i downgrade to 2.0.1 but RSD lite aint having it. when i am on RSD and select ur SPRecovery_ESE81.sbf it loads image then says waiting for re-enumeration takes a minute then says failed flashing process phone did not re-enumerate after RAM downloader was sent (0x703E) someone plz help stayed up all night gettting pissed. i dont get whats wrong ive modded psp and ipod touch so ive got some exp
I did everything on the RSD program and when I click the file and open it up, I can't click start? How come? It shows my device is connected and everything also. PLZ help.
I did it to the point where you have to find the file, i opened the file in RSD and it wouldnt give me the option to "start"...and none of that info came up on the right panel...only the left panel when i highlighted my phone...im running on admin and everything, whats going on...
Same comment as everyone else. Comp is a 64bit Vista Ultimate, but when I try to open rsdlite_4.6.rar the computer doesn't recognize .rar as a program. I have no problem unzipping zipped files, but this file doesn't appear to be compressed. If it is, what program would I need to unzip it?
I remember of my Window Mobile days, .rar is a program file that the phone would read not my pc
I also tried to go into C:Programs/Motorola and find the MotoConnect application, but that won't open either.
@erasmussen14 use 7-zip... rar is a compression type file like zip that is extremely prominent in p2p clients for downloading smaller files but in this case 7-zip would be a better choice to un-zip it
how do you run rsd lite as admin on vista? I go to properties > advanced and the option to run as admin is there but it's sorta whited out and I can't select it.
can you help me please. i am following your directions and i download the SP recovery to my download folder in window vista. when i click on the ... icon and select the file information does not populate to the window to the right in RSD light. I have tried to download the file several times and it still will not recognize the file. Thank you for your help.
I have done all the steps prior to this video successfully. However the first time i sent the big file to the phone, there was a problem changing its name. I went ahead and said change the read only file... When i went to clearing data/ ?? it said install aborted cant find file... I re downloaded it again and another error message came up, cant remember... PLEASE HELP!!
I have been trying to do this on my paralell desktop for my mac.... the RSD lite wont connect with my phone after I use the Up d-pad and power button.
@motodroidlife ------i need help i dl everything u asked me to i placed the 32 bit thing on my phone like u said but when i connect my phone to the computer on rsd its not connecting plz help me root again
after doing this, my old phone keeps having the red light and saying that it has no power. but then i have it connected to the charger right now and it won't power up, and i had a full battery before i started this. wth?
rsbandbj1 3 days ago
IF IT DOES NOT RECOGNIZE YOUR PHONE, WITH THE FAILED TO INITIALIZE, INSTALL THE NEWEST VERSION OF RSD LITE VERSION 5.6
alex94kumar 1 month ago
i literally tried EVERYTHING, moving the file, different usb ports, different versions of rsd lite (4.6-4.9), but nothing worked. NOTHING. then i decided to use the newest version. it worked like a charm.
alex94kumar 1 month ago
WILL THIS WORK FOR SAMSUNG GALAXY S
JOEDOW8872 3 months ago
Where can I find sbf file for MB300 motorola phone with droid 2.1? Thanks.
md122005 3 months ago
Is there any way I could get you guys to delete this video? I post (and host) information about the Motorola A855 (Droid 1) phone, and this method for rooting it is so old, it should have cobwebs on it.
No offence intended, but it suggests the use of the file SPRecovery_ESE81.sbf which will at this point cause nothing but problems for most if not ALL Motorola A855 (droid 1) phones since they have all now been updated to a much newer version of Android.
Thank you.
teddyearp 6 months ago
forgive my newb-question: but does this process only apply to the Motorola Droid? i have a Samsung DROID Charge...and this seems to be a MUCH easier process to gain root access than the "standard" rooting of an Android phone.
help a brotha understand, por favor? :)
markdanielmiller 6 months ago
@markdanielmiller - note: i should have watched the entire video before posting. sorry - a bit of excitement caused pre-mature posting :P
so - this is obviously rather focused on the Moto Droid (or, perhaps you could use the same procedure on any Droid phone that has a physical keyboard - but i'm not sure if the software being used is Moto-specific).
that being said, my question is actually "is there a similar procedure to this that can be used for a non-Moto Droid (ie - my Charge)"?
markdanielmiller 6 months ago
make sure you have the 64 bit drivers installed on your phone? what 64 bit drivers?
FatalMusa 9 months ago
I think I may have bricked my droid, the boot screen keeps replaying...I'm trying to use RSDlite and flash a 2.2.2 back onto my droid..it keeps giving me FAILED..any help?
astrofr3k 11 months ago
@astrofr3k is ur screen keep on showing M logo for 4-5 seconds and turns off? Because im experiencing that issue too...
Hilokilo06 10 months ago
This has been flagged as spam show
@TheCraney1985
I have tried putting it onto the Desktop, but it failed. I will try that.
But are you able to do RSDlite as "Run as Administrator"?
I right click on it and the option is not available to me?
xXIMPOSTERXx 1 year ago
Comment removed
xXIMPOSTERXx 1 year ago
@TheCraney1985 I have tried putting it onto the Desktop, but it failed. I will try that.
But are you able to do RSDlite as "Run as Administrator"?
I right click on it and the option is not available to me?
xXIMPOSTERXx 1 year ago
For anyone wondering what to do when the File Details do not fill in after selecting the sbf file this is what worked for me. All I had to do was move the sbf file to the root C: drive. Everything worked prefect then. I am running Win7 32-bit.
TheCraney1985 1 year ago
@TheCraney1985 thanks! was about to ask why the details weren't showing up
bbyannasayang 10 months ago
your awesome screw up my recovery and surprisingly already had all these files and it fixed it
Kalkat579 1 year ago
To install Gummy Jar, you have to do a complete wipe and backup.
jtatex 1 year ago
can you link the sprecovery file you used? every one i find says undefined platform.
jacremes 1 year ago
my droid x is stuck in a boot loop after i tried to install gummy jar ROM from ROM Manager. do u have any idea how to fix this? i would appreciate it very much
LRGskater41 1 year ago
would same general process for droid 2? i know how to get to the bootloader so i cant imagine it would be much different after that
Jr4594 1 year ago
Can't flash my milestone anymore.. After few good flashes, RSD lite 4.6 / 4.7 or 4.8 shows the message "PHONE IS NOT COMPATIBLE WITH MULTI-INTERFACE SUPER-FILE (0X703B). SPRecovery didnt work too.. Any ideas???? Im using now android 2.2.1 canadian ROM (telus).
evangus 1 year ago
Im trying to downgrade from Android 2.2 to 2.1 using CyanogenMod 6.0, Build Number FRG22D as my phone will not reset or load any new Mods or Mod updates...I researched it online and I've already loaded the32 bit for my computer, run RSD lite as an adminstrator and just went to the link to download SPRecovery_ESE81.sbf but the problem I have is that the SPRecovery_ESE81.sbf does not show any file properties when using RSD lite 4.6.....I need to get this corrected ....Have any suggestions...Thanks
sweetdiscounts 1 year ago
I click on the sbf file to open it, and the right pane in RSD Lite stays blank. Help.
jaycook777 1 year ago
Can I use this to method to flash my Droid with Froyo 2.2 ?
HellRemains666 1 year ago
@HellRemains666 yes
lambo525 1 year ago
Nothing happens when I press "Start"
RB2G100 1 year ago
WILL NOT LET ME RUN RSD LITE.
kamokillz 1 year ago
Thanks for the awesome video, this is reflashing with rooted 2.1 is EXACTLY what I need, but this doesn't work on my Droid X. Do you have a Droid X tutorial by chance?
SCORPIOMAJ27 1 year ago
my phone updated to 2.2 yesterday. I wanna root it now thats running 2.2, will the SPRecovery file be the same? when i ran it the info under the file properties did not come up. plz help
aguilacahc000 1 year ago
ive tried this one and the other video where i downgrade to 2.0.1 but RSD lite aint having it. when i am on RSD and select ur SPRecovery_ESE81.sbf it loads image then says waiting for re-enumeration takes a minute then says failed flashing process phone did not re-enumerate after RAM downloader was sent (0x703E) someone plz help stayed up all night gettting pissed. i dont get whats wrong ive modded psp and ipod touch so ive got some exp
stinnettcorey 1 year ago
ok so when i open up rsdlite it doesnt recognize my droid its doesnt say anything where the numbers are can anyone hep please?
airsoftbrotha23 1 year ago
dude thank you so much
commanderoneill 1 year ago
Does this remove any apps or personal info from your Droid or SD card?
laayre 1 year ago
can i root my phone first before installing sprecovery?
michaelchukwu22 1 year ago
Why do I keep getting "Failed flashing process. 0x7100"? What am I doing wrong?
Napz69 1 year ago
I did everything on the RSD program and when I click the file and open it up, I can't click start? How come? It shows my device is connected and everything also. PLZ help.
MapleSh0sh0 1 year ago
Failed flashing process.Phone[0000]:Phone is not compatible with multi-interface super-file.[0x703B]; phone connected
it popz oout such msg while flashingz...can any1 plz help me on where i went wrong???
trishacoolizh 1 year ago
i have a doubtz...im stuck on the RSD LITE...UNDER THE STATUS IT DOESNT SHOW CONNECTED...HOW CAN I SOLVE THIS...PLZ HELP...
trishacoolizh 1 year ago
I did it to the point where you have to find the file, i opened the file in RSD and it wouldnt give me the option to "start"...and none of that info came up on the right panel...only the left panel when i highlighted my phone...im running on admin and everything, whats going on...
TGFMusic 1 year ago
Guys, if you have the 0x7100 problem, try moving the file to My documents or the C:
giceda 1 year ago
Read this for the download links and instructions: droid-life. com /2010/07/08/how-to-root-android-2-1-and-install-android-2-2-on-motorola-droid/
To run as administrator select the program with your arrow keys and press Ctrl + Shift + Enter
giceda 1 year ago
Where is the file
BrodcastBros 1 year ago
For those of you getting error code 0x7100 from RSD Lite, try using another USB port.
ThatNateGuy 1 year ago
i did exactly as instructed and this does not work ... shame on you droidlife
DroidLocks6971 1 year ago
for the no connection people.... get the drivers on the forum.... and for the error ppl... get RDS 4.6
SKDAirsoft 1 year ago
when i go to download it won't open it only says find
PLEASE HELP (DESPERATE)
bhstillidie 1 year ago
RSD isn't recognizing my phone, running on 32 bit vista.
OreWaZero 1 year ago
Same comment as everyone else. Comp is a 64bit Vista Ultimate, but when I try to open rsdlite_4.6.rar the computer doesn't recognize .rar as a program. I have no problem unzipping zipped files, but this file doesn't appear to be compressed. If it is, what program would I need to unzip it?
I remember of my Window Mobile days, .rar is a program file that the phone would read not my pc
I also tried to go into C:Programs/Motorola and find the MotoConnect application, but that won't open either.
erasmussen14 1 year ago
@erasmussen14 use 7-zip... rar is a compression type file like zip that is extremely prominent in p2p clients for downloading smaller files but in this case 7-zip would be a better choice to un-zip it
BAoxymoron 1 year ago
my phone doesnt show that its connected...
sum41addict87x 1 year ago
RST Lite 4.6 does not recognize the phone on 32-bit Windows 7...
marquesbrownlee 1 year ago
Alright i got everything down. but for some reason it FAILS everytime i try to flash .. it never succeeds to finish the process like yours did.
Mltdragon 1 year ago
useless info from the beginning
Jazzff1 1 year ago
@Jazzff1 i did everything droidlife said to the letter and im still not rooted
DroidLocks6971 1 year ago
how do you run rsd lite as admin on vista? I go to properties > advanced and the option to run as admin is there but it's sorta whited out and I can't select it.
kevnz88 1 year ago
@kevnz88 select it with keyboard arrows and press Ctrl + Shift + Enter
giceda 1 year ago
also it wont show that my phone is connected
islescup10 1 year ago
were do u get the file u need in RSD lite
islescup10 1 year ago
how do u run rsd as an administrator...mine looks nothing like yours b/c i still have windows xp
matt2fitz 1 year ago
can you help me please. i am following your directions and i download the SP recovery to my download folder in window vista. when i click on the ... icon and select the file information does not populate to the window to the right in RSD light. I have tried to download the file several times and it still will not recognize the file. Thank you for your help.
joey
P1NKY1 1 year ago
@P1NKY1 Hey if you found a solution to this please message me because im having the same problem.
sshsjd10 1 year ago
why cant i open up rsd lite...i have a windows vista and it isnt opening
HercAndJewel8720 1 year ago
so after this can we install dmupdater and it will root for us?
D0DG3RS4LIF3 1 year ago
will this work on htc droid eris?
Linqua2112 1 year ago
@Linqua2112 no.
nitrousboy0311 1 year ago
I've done everything to prevent a failure on RSD lite. Can't do anything, except see '0x7100'.
StarCraftSportsNet 1 year ago
@StarCraftSportsNet Me too... I would appreciate some sort of solution.
giceda 1 year ago
will you be able to make the 2.2 updated without any problems once it comes out if the phone is flahed and rooted?
GoldRckoon 1 year ago
it would be nice if you showed how to reverse all this.
mannyischillin 1 year ago
can you use a 32 bit computer wit this also?
jaypfrompeliqro 1 year ago
I have done all the steps prior to this video successfully. However the first time i sent the big file to the phone, there was a problem changing its name. I went ahead and said change the read only file... When i went to clearing data/ ?? it said install aborted cant find file... I re downloaded it again and another error message came up, cant remember... PLEASE HELP!!
Motorsport333 1 year ago
i keep getting failed after execution
swagga1600 1 year ago
my phone doesnt say hacking your phone when i click start
swagga1600 1 year ago
why didnt u add a link to the file? instead of having to look for it
swagga1600 1 year ago
I'm getting Platform is defined CDMA_TYPE-OMAP_CHIPSET
AntR82 1 year ago
Hi, I flashed and got a "pass" but when it reboots it just goes back to Bootloader. Suggestion? Good video, thanks.
shiggityx2 1 year ago
is there always a way to revert back to stock 2.1?
... i just need some reassurance before i start this process
benisindeedkickass 1 year ago
I have been trying to do this on my paralell desktop for my mac.... the RSD lite wont connect with my phone after I use the Up d-pad and power button.
cajunson101 1 year ago
is there any way to take off the sbrecovery? if so please let me know
serioavila09 1 year ago
nvm had to update drivers
firestone865 1 year ago
my droid doesnt come up in the rsd lite help!
firestone865 1 year ago
right click and select Run as Administrator
rdunseith76 1 year ago
how do i run it as an administrator.
gameingboyz 1 year ago
@gameingboyz or select it with arrow keys and press Ctrl + Shift + Enter
giceda 1 year ago
thanks for this video so much easier with the vid tut than text.
quikstrk 1 year ago
it wont recognize my phone, droid.
ballar23cle 1 year ago
Keyboard shortcut to system of 32/62, hold "Windows key and press Pause/Break" key
hazorlazor 1 year ago
Do we need run RSD as administrator?
xXkmart95Xx 1 year ago
@xXkmart95Xx Yes.
motodroidlife 1 year ago 3
@motodroidlife ------i need help i dl everything u asked me to i placed the 32 bit thing on my phone like u said but when i connect my phone to the computer on rsd its not connecting plz help me root again
cantthinkofonestill 1 year ago
Comment removed
iEnjoiursister 1 year ago