NEW Magpul PRS Sniper stock install

[TotallyVeracious]

FYI-There are two allen screws that can be loosened on the side of the stock to allow the buffer extension tube to slide in easier

[Chivalrous420]

music during work montages is priceless, lol.. i bought this same stock, and i have a mil-spec adjustable buffer tube, got a rifle extension buffer tube like you already had installed inside your stock, but seems weird that it doesn't have the thread capacity to screw into the lower receiver and use the castle nut, im assuming you just dont use the castle nut with such a buffer tube extension?

[tyler4462]

What is the picatinny rail on the end of your gun? Can that be used on the Varminter with the black, fluted bull barrel?

[69sorrow69]

what grip is that?

[CMSandRMO09]

just shoot the gun shoulder mounted when you cant get the stock on...the kick will tighten it up for ya hahah X)

[CowboyRJB2]

half the install was off camera... DUH!

[tracksquad2k11]

she is a tight one lol

[AKSKSMAN]

Did you just put a mil spec stock on a commercial buffer tube? Would that explain why it was such a tight squeeze?

[diesel11679]

I believe the terms "Commercial" and "Mil-Spec" only apply to carbine buffer tubes for adjustable stocks.

[AKSKSMAN]

@diesel11679 ummmm....OK? O_O

[TZOID08]

wow...that was painful. 

[vltorify]

holy santa clause shit, thats a damn nice ar

[atomiclab]

Serious question. I want to know about that BARREL! what length of barrel is on that AR? and what length of handguard is on it also? more about your barrel, who makes it? what is the chamber? what bullet weights are you shooting out of it?

[1911sa]

did u have to reuse the screw from the old stock and put on the PRS?

[Goindeff]

@1911sa You can reuse your own screw, but a new one is included

[missionxo]

long ass bufffer tube

[SEMMERLING]

Look, there is nothing to putting this stock on IF YOU READ THE DIRECTIONS. Simply put, either learn to read the directions or refrain from doing "How Tos" that are absolutely the wrong, most uniformed way to do the job.

Why would anybody watching you put THIS together, learning that you didn't even bother to read the directions, care about ANY other directions you might offer up?

[Goindeff]

@SEMMERLING This video was sub post to be so simple it was a joke. And so far over 3,000 people including you viewed it. I was going to take it down, but it seems to be popular. Thanks for the feedback.

[Vectar84]

@SEMMERLING

Man, peoples watching that vid before they buy it and see any directions. To see how its looks like, and what problem can be if they bought it. Don't be dumb!

[SeismusBand]

Does the stock come with the stock removal tool?

[Goindeff]

@SeismusBand You mean an allen wrench?

[sniper4usmc]

Do need to remove buttstock spacer?

[Goindeff]

@sniper4usmc Yes the spacer needs to come out. And make sure the adjustment knobs are in there lowest position.

[Delta094204]

So it's an AR-15 made to look like the PSG1? I would add some lubricant like K-Y jelly, WD-40, or butter to the buffer so it's easier to slide the stock on.

[Goindeff]

@Delta094204 Well looking like a PSG1 wasnt the point, but now that I look at it. Yeah it does kinda look like one.

[xtraflo]

I personally hate those types of handguards. They look nice I suppose, but make the rifle too heavy IMO

[supermanmach1]

Mines in the mail!! That totally completes the AR! Cool rifle dude! I have the same barrel with the float-tube and would like to mount a bi-pod on the front, can you make a video on how I can mount one? Thanks Goindeff

[NoSweatOffMySack]

"If the stock does not slide easily in place, loosen both screws of th front footmans loop (Sling mount) using a 1/8" hex key"

Slides on easy.

[NoSweatOffMySack]

When in doubt... follow the directions.

[Goindeff]

Yeah I realized the adjustments on the stock were not flat when sliding it on. I never read the instructions. Thanks for the comment though

[NoSweatOffMySack]

I had to laugh, cause it would have made your 7 minute video take about 45 seconds. I just put one on my DPMS Bull 24 .223. Im picking up the same gun in .308 tomorrow, and yes.. oh yes... It WILL have the PRS on it too!!! Great stock. Very rigid for an adjustable.

[Goindeff]

Yeah I know. WHICH was gonna be the funny part of the vid. Ida done the install, and been like "there ya go thanks for watching" It is a great stock. Ive got a range vid of this up too.

[NoSweatOffMySack]

So what kind of trigger do you use?

[Simonov5966]

very nice AR precision

[TheFireman1963]

OK i have to ask when you have the cheek rest up can you pull back the charging handle and have the bolt catch hold the bolt . i put one on my dpms and to charge the gun the rest has to be down.then the bolt has the right langth of travel to chargr the rifle.

[Goindeff]

I havent had a clearence problem at all. Ive got a range video of this up too

[rawimpact]

what kind of upper is that? looked like a dpms panther

[Goindeff]

thats a milspec upper. Built by a company called Tonys Customs

[NoSweatOffMySack]

mines a panther!!!!

[machinist01984]

Awesome stock, looks great on your AR what are you going to do with the old one?

[Goindeff]

I still have the old one. I have a few, and thanks for watching

[shananagans5]

Cool, I have looked at those, I don't know if it would work for me. I injured my right eye yrs ago and have to use my left eye with a scope. It is doable but a real pain. I tried going lefty but that was just down right dangerous.

[Goindeff]

Wow thats a real bitch huh. Im not sure if this will help. Its main purpose is to give you a good cheek weld and balance the rifles weight.

[shananagans5]

Yea, I have to make sure my ARs have a carry handle to mount optics higher then just tilt my head a bit more. I zero at 200 and just take into account shorter distances will be a tad low. A consistant cheek weld is a prob. Those stocks are wonderfully adjustable I am just not sure its in a range that will help me. I love the Magpul stuff. I just got some of the P mags and they are sweet. I am wanting to set an AR up for ling range and I am strugling with what will work for me.

[shananagans5]

Continued: I have an EOTech on a carbine and it is really nice for close range multiple target stuff. That is what I am really good at. I will do a vid when I am well. :) LOL People think its funny with a girl going to town with an AR. Anyways, Mag30th has me wanting to try extream ranges again. I tried yrs ago but topped out at 500 yards or so. Been looking at a Remington700 in .338Lapua and get a wood stock and cut it out.(looks funny but works very well) LOL decisions decisions.

[Goindeff]

Yeah Magpul is really top of the class. Im really happy with it so far and I havent even taken it to the range

[chanderson1]

Just going through some of your videos. They're helping me get through this rainy and dreary morning at work. That stock is a perfect match with that gun. I know Magpul makes excellent quality products. Good choice!

[Goindeff]

Yeah ive gotta be at work at 10:30 eastern rainy here too. Yeah I cant wait to sholder that AR at the range. Im very impressed with Magpul so far

[zboyco]

magpul puts out some nice stuff

[Goindeff]

Yeah dude this is a real quality stock. my other stock just fell off as you can see...tight tight clearence.

[whitebail1]

Now thats a nice stock brother !!!! 4 takes LMFAO thats funny shit !!!! Wow 100 subs good stuff keep it up !!!

[Goindeff]

yeah i never thought a simple stock switch would be such a pain in my ass

[MrCntrybyWlkr]

Nice

[Goindeff]

Thanks, please subscribe

[MaryissaNickole5]

i love youuuuuu mattt: ))))) hahaa. subbbscribe to me :))) IM MENTIONED IN THIS VIDDDEO ^^^^^^^^^^

[OilTheGun]

Sweet...

[Goindeff]

yes oilthegun....very sweet

[glocklife]

Nice Stock... Looks much better.

You know you never put that chicks link up. At least I don't see it.

[Goindeff]

Yeah your not missing anything. Shes just buggin the SHIT out of me haha. yeah it really makes this rifle closer to how i want it.

[lookin4memarbles]

We like em tight!! lol 5*****

[Goindeff]

Yes this is a TIGHT TIGHT fix for that hole. But im used to it haha