UNIQUE USE FOR RECIPROCATING SAW VIDEO

[djhelladef]

fantastic "snip" tip! thanks so much.

[Caravandrums]

no safety glasses!

[HomeRemodelWorkshop]

@Caravandrums You are right, rookie error on my part! There was not much for debris flying around using this method but better to be safe than sorry.+++Bob

[doormaker2]

THANKS for this tip! I've been trying to strip an old house with lots of ugly/damaged/moldy drywall that was taking a zillion years of unpleasant labor to remove. Several tools can remove SOME of it - but the problem remained: how do you remove the drywall with the fasteners in it - without hurting the stud? This is it - a blade that only cuts as deep as the drywall you want to remove. You're a lifesaver - or at least a sweat saver! Thanks for this tip!

[kingcahoj]

Good tip for someone who dones't have very much control over a sawzall.

[flywithtrance]

l love your idea you great

[dreambeliever62]

thanks for the lesson

[VerifyVeracity]

Why do you have to pre-approve the comment?  for the one in a 1000 chances that some nut is going to post something that is obscene then you can just delete if you want. don't post this if you want it's just a thought.

[HomeRemodelWorkshop]

@VerifyVeracity I try to stay up on video comments but I have a couple of toy videos kids seem to like watching and the thought of them watching another video with a nasty or obscene comment is too risky. Having kids myself makes me a bit careful, +++Bob Unfortunately its more like one in forty Why? I do not know.

[epics7]

@HomeRemodelWorkshop Well said and well monitored.

[VerifyVeracity]

If you cut the patch peace of sheetrock out first then use it to make your lines on the wall where you need to cut out the damage part, you will have a easier time of matching it all up. Just like when you repair vinyl flooring. Maybe you did this. Next time I do a repair like you did I’m going to try it (slowly) with a cut off blade (at a slight angle) in the past I would cut a hole and feel around, then use a knife to cut the line in the middle (or slightly more than ½ way in) of the 2x4.

[EdVidz]

Good video, smart use of your tools. Got the job done.

[phartattack]

This is good in a pinch But....

multimaster/Multitool does the same thing and you dont have to dammage the blade.

[HomeRemodelWorkshop]

@phartattack I agree, oscillating tools do the job well also and may even make the cut a bit cleaner. Was just giving an alternative to people who don't own one or have a large or multiple patches to deal with. This method seems faster. If you use a worn=out blade then its not a waste. Thanks for watching+++Bob

[hochbob]

Waste of a blade.

[HomeRemodelWorkshop]

@hochbob What do you do with your worn-out blades?+++Bob

[tvhk04]

@hochbob Blade is cheaper than label .

[ytu121]

Good I really like tips like this, thank you that really helps.

[binashraf]

i wanted to see u patch it up too!

[plexsus]

Great idea bob.

[nopot2peen]

I had never thought of doing this. Great idea. Less dust than a zip saw too.

[lifeisdeath99]

this is cool theres a blade you can buy called safe-t-kut it works the same but i think the manufactured kind would be safer...but also more expensive...i think the decision is based on you experience and budget.

[HomeRemodelWorkshop]

@lifeisdeath99 Wow I was not aware a specialty blade existed for this purpose. Thanks for the info+++Bob

[signupsigma]

how did you know where studs are?

[HomeSweeetHome]

it''s a lot easier to just use a battery powered circular saw set to 1/2"

[HomeRemodelWorkshop]

@HomeSweeetHome I would have to think alot more dust?+++Bob

[HighSerrias]

Cool idea

[BiggCleve2]

great tip, you can use a blade that you were gonna scrap anyway.

[keffren1]

you only need a cutter and your hand to do that

[GypsyKing7]

Once you are done, How do you put the Blade Back Togeather? JK, Good tip

[ChavezEnergyCompany]

Innovative

[1995mazda]

Best tip I've seen for a recip saw since the scraper blade

[123kkambiz]

That was excellent and geneous idea. thanks. I surely enjoyed the idea.

[irich62]

by the time you get your saw out, waste a blade piss around with the level ect, I will have already cut the hole with my keyhole saw and utility knife.

[hacker1414]

Interesting idea, though I personally wouldn't want to break one of my blades just for one small simple job like that.

[HomeRemodelWorkshop]

Your blades never get dull ? Just a thought Thanks for watching +++Bob

[jimmyfuckinmusic]

I have been doing that for years...It works perfectly, good tip.

[SobeSpeed]

Brilliant idea! Tried it today and even cut my blade 3/32" too long--just to test Pod 10's concerns. Results? Pod 10, dump the clump and buy a quality recip.; or, use a thinner used blade. Smart tip!

[poderiasereste]

I dont´t doubt that it works, but it´s not a good idea. Trimming the blade to a flat edge it shocks against wood surface and could damage the power tool gears.

[HomeRemodelWorkshop]

If your blade is bottoming too hard then you cut the blade too long.The nature of using a reciprocating saw is generally for demolition,rough cuts,it has been my experience that generally speaking they are pretty durable.That being said if you still have concerns then don't do it but I would love to hear your reaction if you would actually try it Thanks+++Bob

[poderiasereste]

Shure I will try, but first I need a huge hole on drywall to be fixed. I was thinking about it, if the flat trimmed edge of the blade be sharpened using a grinde like a chisel (or knife), will reduce the problem if it shoks against the wood frame. Do you agree? Anyway, I will try it soon. Thank you about sharing your ideas with us.

[rodmxw11]

AHA! Genius!

[hobyyman1]

Nice tip

[rickster294]

great tip .... when i patch drywall I cut the patch first then use a pencil to make the wall art (now i will use your idea here to cut the hole ) then just put the patch that i cut in the perfect shaped hole from your idea .... thanks for a great idea

[HomeRemodelWorkshop]

Thanks +++Bob

[kurisutefuru]

that's  just smart! Great man!

[mattiuslad]

Shouldn't bob have cut the opening so that it also exposes a little of the timber frames, so that there is something to affix the new bit onto....

[HomeRemodelWorkshop]

I did+++Bob

[moxee33]

I made this and it worked great! thanks!

[HomeRemodelWorkshop]

Doing is believing Glad to hear it !+++Bob

[Robkat3751]

Amazing trick Thanks. But when cutting the blade why not angle the cut back so that you have a point to help plunge with? You would still have the correct depth.

[HomeRemodelWorkshop]

The edge of the blade itself is thin enough to slice the drywall.I guess it would not hurt to try it thou.Thanks+++Bob

[nycswang]

AMAZING TIP! GENIUS! who knew i already had the tool i needed for short cuts in wood or sheetrock. i just subscribed.. thanks for the great tips

[baseballgrader]

I love the tip. never thought of that and I have been doing sheetrock repairrs for years.

[brokenarrow2222]

i'm 58 yo, it's been a long time since I've learn learned a new technique. nice job. thanks.

[HomeRemodelWorkshop]

I hate to admit it but I am catching up to you! At our age as many tricks we have in our bag to make things easier and compete with the young studs the better!+++Bob

[HomeRemodelWorkshop]

I understand what you said and,although I am just a lowly carpenter, and not a genius myself there have been times when trade names become the most commonly used name for products that the difference can become unclear.I have changed the name of my video to help with clarity Thanks+++ BOB

[dduran375]

Just so that you all know. The SAWZALL is a trademark name from MILWUAKEE ELECTRIC TOOLS all other tools are Reciprocating saws. Much like that DeWalt that he is using.

I am no genius, and by commenting on this stupid thread can justify to that, but isn't a professional tool guy supposed to know that?

[haskellf]

What is the benefit of pulling the blade out as far as possible? Why not measure from the position where the blade is pushed in as far as possible?

[HomeRemodelWorkshop]

If you allow to bade to be in while cutting the length to blade,it will extend deeper when cutting than you want it to be!+++Bob

[SauronsEye]

The thought process behind this idea is why we are the alpha animal on this planet.

[HomeRemodelWorkshop]

Chad must be the "MAN"===Bob P.S My snips are fine.

[Stan1208]

I will say this, Chad can cut out a fiberglass bathtub in 4 sections. And it only takes him 9 swings of a sledgehammer to bust out a cast iron tub. But your use of a sawzall is pretty cool. But it will ruin a good pair of snips to cut the blade.

[Stan1208]

Chad Newman don't do it that way.

[HomeRemodelWorkshop]

Do I know Chad Newman?

[Stan1208]

Everybody knows Chad. He is a famous remodeler.

[HomeRemodelWorkshop]

How can I see this Chad guy I am willing to learn from anybody?===Bob On T.V? Newspaper? Youtube?

[Stan1208]

Sorry man. Chad refuses to reveal his secrets.

[HomeRemodelWorkshop]

I would agree but if I were cutting out an entire door opening or had several patches to do, I would be willing to race you and your utility knife.Not saying its a bad way to do it,just not the only way.===Thanks Bob

[rhblakeman]

Ah you must not charge by the hour Bob LOL.

[rhblakeman]

Is it just me or is this overkill? I use a common utility knife and it takes just about 2 mins total. Good idea but seems like using a chain saw to miter a door hinge (kinda). Otherwise you and Askthebuilder have some awesome videos.

[rhblakeman]

Mortise, not miter - my brain is mush tonight. You get the idea though, you dont need more than a simple hand tool for this type of work.

[ringbolt9]

excellent tip. ignore  the negative remarks

[HomeRemodelWorkshop]

Thanks I try not to be too thin skinned.I also realize the written word sometimes seems more harsh than intended,However your post is crystal clear, THANKS BOB

[bigboopensteinette]

sawzall= milwaukee. your saw = dewalt.

call it a recip saw before my head explodes.

Good video though haha.

[HomeRemodelWorkshop]

Interesting thought I will have to try that===Bob

[amonalisa32304]

What if... you cut out the patch by nailing an oversized patch piece on top of the hole you were going to repair and cut both out at the same time. You'd need to cut your thin blade to the length of two pieces of drywall, but you'd have a perfect fit and only one cut to make. Would that work better?

[upinflamezzz]

It's drywall buddy, you could have used a sharp razor knife with the proper setting and something to guide you. Would have produced a better result. A sawzaw is just too powerful.

[HomeRemodelWorkshop]

I think if the patch were big enough you would wear out your knife blade as well as your arm but different strokes for different folks.Thanks for watching===Bob

[HomeRemodelWorkshop]

Not being critical ,but did you actually watch this video? I am a bit confused by your comment=-==Bob

[mopar2fast]

I would use a compass type hand saw instead on drywall. Reciprocating saws are way too powerful for this material and could damage wiring, plumbing and even insulation and framing members inside the wall.

[SPISurfer]

I took out 3 large walls in 30 minutes. Thank you for posting! Rehabing the house after hurricane Dolly by ourselves.

[catafly1]

My husband works so many hours, so when he is home, its to rest....now that I have found you I can stop feeling guilty for asking him to repair something (which often turns into a a fruitless fight) I can just take care of it my self!

[HomeRemodelWorkshop]

What a great attitude!Could you call my wife? LOL===BOB

[adjutant87]

How do you patch that hole , stud to stud?

[dersheeple]

All ya had to do was pull out that broken chunk and LOOK inside for pipes or wires ;)

[bobbaay]

lol

+1

[FastEddie11111]

This is just in case you have to patch many holes, all in a row or something fast.

[treuthebuck]

Awesome tip!

[dergrossen]

brilliant idea..thanks for sharing..I owe you!!

[rah4346]

Great idea, thanks. That's another use for the BetterThanSex saw!

[HomeRemodelWorkshop]

I don't know about the "better than sex" part but I too appreciate a good saw-zall! You may want to consider who you date! LOL===Bob

[rah4346]

Hey, she wasn't bad until she ran off with the carpenter...his Milwaulkee was bigger than my deWalt, I guess, lol

[ViperFace]

Haha...construction humor..

[masterquadbiker]

wow all of his videos are amazing hes really got a talent for d.i.y

[HomeRemodelWorkshop]

Thanks,Maybe doing it most my life has something to do with it.lol Thanks for watching===Bob

[masterquadbiker]

wow!

hope u never quit d.i.y

ur just brilliant

^^

[WiiForever302]

Dang I wanna do this but I'm with that stupiod fever.

[mrfoxthedude]

cool

[LonelyRavenProductio]

I'm just dissapointed you don't have a cordless Sawzall. :)

[HomeRemodelWorkshop]

Batteries never die on my sawzall lol===Bob

[nestorrfortuna]

great as always

[hoydog33]

great tip!

[murphj4]

Cool.