That's... was.. like.... The best... Fog... I ever had...! Hahaha one thing to mind that's not a thermal protector. It's a thermostat that tells the mating it's hot enough for the pump to spray fog. Otherwise the liquid would just spray out the front. Try hitting the switch when you first plug it in cold. It won't spray correct. Cool video tho. I was wondering how the insides worked anyway. I just got done watching a kid tell me to heat some beauty product from cvs on the stove. Just buy fogger
That mass of "white stuff" is fiberglass. That "thermal regulator" is just a thermal switch (its not a regulator), Its function is to cut power to the pump when the heat exchanger is below required temperature, It does not "prevent it from overheating or control the heating element in anyway. (not on the low end store bought machines anyways) Judging by the exchanger size and that windshield washer pump (yes it is in fact a cheap windshield washer pump) it is a extremely poor quality machine.
The pump it self is powered by that transformer board, being a windshield washer pump it runs on 12volts DC. If you want to use it in something else there is no need to bypass the thermal switch. Just simply remove it and power it with 12v DC. Now if your attempt to bypass the switch to operate the fog machine longer bursts it will not work, as the block wont get hot enough to atomize the fog fluid.
@xDjAsOnF thats because its made for low laying fog with the ice part in the front. it dosent have a part to aim stright for on the output. it uses the ice to cool it down and stick to the ground like a dry-ice effect, or halloween fog witch is what this fogger was made for. please do your research before hating.
@billyillusion do you mean to attach a regular button with a cable? What usually happens is a broken wire on the connector of the wireless receiver that plugs into the smoke machine. You can also make this work with a dimmer channel if you intend to. I've replaced a few in order to work with a so called fake DMX :)
can i use just water in my fog machine??? do i really need all the other stuff like the special fog juice singe its water based... what would happen if i only used water?
u need to use special fog juice as water will only come out as steam and probably melt the ice if ur using an ice fogger with the fog juice it will come out very dense like a cloud and thats wat u want
using water in a fogger will melt all the plastic , fogger juice has a low boiling tempreture , therefor becomes steam at a lower tempreture, water boils at 99 degree celcius and will melt the inside and you will have a leak on your hands and will cause electricution maybe , so buy the juice and dnt mess with the dilution , if u buy second haqnd check it hasnt beeen abused in this way iether..
You would probably produce a very small amount of steam only. Fog juice is glycol based with a little distilled water in it. The heater and tubes in the machine would probably build up calcium deposits over time and cause it to not function.
i wouldnt suggest using water only, as fog fluid vapourises at a much lower temp than water, if water was only used it would be like boiling a kettle, and anyone close to it could get serious burns!
if you bought your fog machine off ebay it would probably do that, if you are serious about using fog machines you should invest in a professional fog machine wich cost something like 500 dollars Australia and will last you a good 6 years also you need to clean out your fog machine search it on youtube "how to clean your fog machine" your heating ellement is probably gone and no good anymore if it doesnt heat up, but u can always get a professional to come in and look at it
there's a good chance the pipe going into the heater block is the same one as comes out after it's wound round a heating element several times. You may even find that the exit end of the tube is pinched slightly to make sure that the exiting vapor does so at high pressure. The fluid itself is generally glycol and water at a 30% glycol to 70% water ratio. The earliest smoke fluids used glycerine for a thick but slightly stinky fog.
Machine* not mating. Autocorrect strikes again.
cgrobe21 2 months ago
That's... was.. like.... The best... Fog... I ever had...! Hahaha one thing to mind that's not a thermal protector. It's a thermostat that tells the mating it's hot enough for the pump to spray fog. Otherwise the liquid would just spray out the front. Try hitting the switch when you first plug it in cold. It won't spray correct. Cool video tho. I was wondering how the insides worked anyway. I just got done watching a kid tell me to heat some beauty product from cvs on the stove. Just buy fogger
cgrobe21 2 months ago
Splitting hairs, but it's high density when cooled by the ice.
akkalakakalakka 2 months ago in playlist More videos from crazybuilders
That mass of "white stuff" is fiberglass. That "thermal regulator" is just a thermal switch (its not a regulator), Its function is to cut power to the pump when the heat exchanger is below required temperature, It does not "prevent it from overheating or control the heating element in anyway. (not on the low end store bought machines anyways) Judging by the exchanger size and that windshield washer pump (yes it is in fact a cheap windshield washer pump) it is a extremely poor quality machine.
Lokivoid 4 months ago
@Lokivoid good info, thanks!
bavetta 4 months ago
i was in a room with so much fog that it was pitch black and still dim with light on and when bright light was on it was blinding white
TheChickenrun3 4 months ago
he bought it at....Target....So did i...
mazter310 7 months ago
nemrossz
tecktomy1 9 months ago
All the fog comes out places where it dont belongs..
sjoerdstudio3 11 months ago
and thats why u dont have a girl frind.... he he im a bitch
MyxShitxIsxBig 11 months ago
Any way to disable the thermo control thingy? mine stopped working and i wanna use the pump for somehting else.
Gerb1l911 11 months ago
@Gerb1l911
The pump it self is powered by that transformer board, being a windshield washer pump it runs on 12volts DC. If you want to use it in something else there is no need to bypass the thermal switch. Just simply remove it and power it with 12v DC. Now if your attempt to bypass the switch to operate the fog machine longer bursts it will not work, as the block wont get hot enough to atomize the fog fluid.
Lokivoid 4 months ago
cN YOU USE ONLY WATER PLEASE RESPOND THANK YOU :)
mafia7555 1 year ago
@mafia7555 nope, it needs to be the fog machine liquid, which is a mixture of glycol and water as far as I remember
bavetta 1 year ago
SMOKE GRENANDES!!! AAAAAAAAAAAAAAAaaaaaaaaaaaa!!!!
alippo86 1 year ago
gotta say, thats the fucking shittest smoke machine ive seen
xDjAsOnF 1 year ago
@xDjAsOnF thats because its made for low laying fog with the ice part in the front. it dosent have a part to aim stright for on the output. it uses the ice to cool it down and stick to the ground like a dry-ice effect, or halloween fog witch is what this fogger was made for. please do your research before hating.
alecs12222 1 year ago
@alecs12222 yeah ive done my research my friend and that smoke machine is FUCKING SHIT
BUY A REAL SMOKE MACHINE YA CUNT
xDjAsOnF 1 year ago
@xDjAsOnF i use it and its really good, if used for intended purposes. (low laying fog!)
dont talk shit, your a dick.
alecs12222 1 year ago
@alecs12222 pussy on the pavement
xDjAsOnF 1 year ago
@xDjAsOnF lol.
alecs12222 1 year ago
Is that the 400watt or 1000watt?
s28400 1 year ago
Not really making fog on the ground...
circusactone 1 year ago
@circusactone he said he didn't have ice in it...
MrSampie1 1 year ago
my fog machine wireless remote control spoil... can i just replace it with a normal on off switch ... any one can please help up??
billyillusion 1 year ago
@billyillusion do you mean to attach a regular button with a cable? What usually happens is a broken wire on the connector of the wireless receiver that plugs into the smoke machine. You can also make this work with a dimmer channel if you intend to. I've replaced a few in order to work with a so called fake DMX :)
morsaPT 1 year ago
can i use just water in my fog machine??? do i really need all the other stuff like the special fog juice singe its water based... what would happen if i only used water?
SIRJAMESORR 2 years ago
u need to use special fog juice as water will only come out as steam and probably melt the ice if ur using an ice fogger with the fog juice it will come out very dense like a cloud and thats wat u want
dirtydogdiscos 2 years ago
yes it is steam and it will melt the ice
doc3000i 2 years ago
using water in a fogger will melt all the plastic , fogger juice has a low boiling tempreture , therefor becomes steam at a lower tempreture, water boils at 99 degree celcius and will melt the inside and you will have a leak on your hands and will cause electricution maybe , so buy the juice and dnt mess with the dilution , if u buy second haqnd check it hasnt beeen abused in this way iether..
mylesrockwell 2 years ago
You would probably produce a very small amount of steam only. Fog juice is glycol based with a little distilled water in it. The heater and tubes in the machine would probably build up calcium deposits over time and cause it to not function.
RainJetSprinklers 2 years ago
if youonly use water it will just be steam and it wont hang a round from a long time
doc3000i 2 years ago
Just make your own. Buy some Glycerin from you local Grocery store or drug store and add 20% water then your ready to go.
CalisCool 2 years ago
add salt and one other chemical i cant recall just look it up to water and wallah cheapo fog fluid
djfritzentertainment 2 years ago
@SIRJAMESORR
i wouldnt suggest using water only, as fog fluid vapourises at a much lower temp than water, if water was only used it would be like boiling a kettle, and anyone close to it could get serious burns!
soulsnurf 1 year ago
my fog machine dosen't heat up when i turn it on. Why does it do that? The same thing happened to my last one also.
RmMS11194 2 years ago
if you bought your fog machine off ebay it would probably do that, if you are serious about using fog machines you should invest in a professional fog machine wich cost something like 500 dollars Australia and will last you a good 6 years also you need to clean out your fog machine search it on youtube "how to clean your fog machine" your heating ellement is probably gone and no good anymore if it doesnt heat up, but u can always get a professional to come in and look at it
dirtydogdiscos 2 years ago
there's a good chance the pipe going into the heater block is the same one as comes out after it's wound round a heating element several times. You may even find that the exit end of the tube is pinched slightly to make sure that the exiting vapor does so at high pressure. The fluid itself is generally glycol and water at a 30% glycol to 70% water ratio. The earliest smoke fluids used glycerine for a thick but slightly stinky fog.
bigclivedotcom 2 years ago
good vid :)
~!*TWIZ*!~
Twiz9491 3 years ago