1. JLN posted a diagram for GSEAV3.1 in which he picked up the voltage basically from the C and the B of one of the transistors,this is a nonsense, that's the phase voltage-0.7V (BtoE voltage drop) i hope u didn't make the same mistake, use 2 adiacent collectors for that, that is voltage between phases
2. Seiki said its COLD energy , the transisitors get hot?
3. JLN didn't measure current on the same load as voltage, BS!
4. FE needs radiation,bulbs filaments do that and they are coils at 5Mhz
Ehy, have tried to connect electromagnets instead of the lamps? (like the Ema Motor of Ev Gray)? if you connect an electromagnet it SHOULD be charged, or have you try to connect a copper plate? Hope
Yeah, this is the obvious way to utilize the effect. To put three coils as a load and place one pickup!
In this case the control voltage on the cap increases to 36V. But now we have problems with the resonanant F of the pickup coil. It should suit the separate frequencies of three driving coils... still working on it.
Besides the waveform is not sine nor square. And Naudin`s project seemed to be ended with nothing.
1. JLN posted a diagram for GSEAV3.1 in which he picked up the voltage basically from the C and the B of one of the transistors,this is a nonsense, that's the phase voltage-0.7V (BtoE voltage drop) i hope u didn't make the same mistake, use 2 adiacent collectors for that, that is voltage between phases
2. Seiki said its COLD energy , the transisitors get hot?
3. JLN didn't measure current on the same load as voltage, BS!
4. FE needs radiation,bulbs filaments do that and they are coils at 5Mhz
TheBblindman 7 months ago
@TheBblindman 1. He picked voltage from BC of different transistors :) Should have try the second method too.
2. Yeah. JLN stresses the nessessity of heatsinks!
3. Agree.
4. 5 Mhz.. not so mutch. Inductance is farr less then 50 nH. Even on such HF it`s nothing..
Thanks ^^
mimieowcat 7 months ago
Ehy, have tried to connect electromagnets instead of the lamps? (like the Ema Motor of Ev Gray)? if you connect an electromagnet it SHOULD be charged, or have you try to connect a copper plate? Hope
alegabber90639 10 months ago
@alegabber90639 Hi!
Yeah, this is the obvious way to utilize the effect. To put three coils as a load and place one pickup!
In this case the control voltage on the cap increases to 36V. But now we have problems with the resonanant F of the pickup coil. It should suit the separate frequencies of three driving coils... still working on it.
Besides the waveform is not sine nor square. And Naudin`s project seemed to be ended with nothing.
But still there is a hope :)
mimieowcat 10 months ago
@mimieowcat MMM.. maybe you can try to connect first a load and see if work, no?
alegabber90639 10 months ago
@alegabber90639 Three coils are connected instead of lamps now, working. What`s next? :)
mimieowcat 10 months ago
@alegabber90639 And what you mean by copper plate connection? How could it help the deal?
mimieowcat 10 months ago