How To Install Replace Remove Door Panel Toyota Camry 97-01 1AAuto.com

[jonnyc555g68]

Thanks for the tutorial.....i needed to change the door handle...

[perry244]

do i have to do this in my chevy lumina because i pop off that screan and theres no bolts for the speaker or enough room for it to come off

[1aauto]

@perry244 Yes you would more than likely need to remove the door panel to remove the speakers.

[bigmohawkguy]

Does anyone know what the piece at 4:57 is called? And would anyone know where i can get one? I lost it when I was putting the panel back on.

[1aauto]

@bigmohawkguy There's not really a specific name for that tab. You could probably get one from the junk yard or your local dealer. Hope this helps you out.

[samisim0]

havin a hard time gettin the rear interior panel loose to fix the power window controller....any thoughts?

[1aauto]

@samisim0 You may want to look for any hidden screws that may be holding it on.

[kumquatsta]

i'm assuming after removing the door panel, removal and replacement of the exterior door handle is straightforward? will there be a video for that soon?

[1aauto]

@kumquatsta We have a outer door handle removal video for the 92-96 Toyota Camry. It may be a similar process on the 97-01.

[chumpy5160]

thanks for the video. made job much easier and i didn't throw one tool. how on earth do you get the screw cap back on the big screw underneath the tweeter? i've tried pushing them straight on. i've tried starting from one side. my thumbs can't take anymore.

[me373]

thanks for this video...I have a 2000 camry and need to replace a broken drivers exterior door handle...do you have a video showing how to do that? thanks again for your time doing these videos.

[1aauto]

@me373 For that particular year we don't.

[tcuk]

Would this be similar to a 98 Corolla? I have the change the assembly/motor on mine.

[1aauto]

@tcuk The basic removal of the panel should be pretty similar to your vehicle. If you take your time and remove any hardware off of the door panel you should be able to remove it in a similar fashion.

[tcuk]

@1aauto Thanks...much appreciated.

[1aauto]

@tcuk You're welcome.

[baderalmuwallad]

awesome :)

[TheViolentj]

thank you A1auto u helped alot

[1aauto]

@TheViolentj No Problem check out our site 1A Auto dot com. Athough if you use A1 you'll find us too!

[ebarshin]

THANK YOU for posting these videos! I have absolutely no experience with fixing anything automotive, and I was able to successfully replace my window regulator/motor assembly in my 1999 Camry. You saved me so much money! Thank you!

[1aauto]

@ebarshin Glad to help!

[atlanleone1]

Though the camera is stationary without zooming in, the instruction is clear and useful. I fixed mt car using this guide. Many thanks. AtlanLeone1

[CHANUS0703]

How about removing the rear door panel for a 1999 Toyota Camry? I found 3 screws. Thank you

[KierkegaardSayWhaaa]

What if I cant roll the window down?

[1aauto]

@KierkegaardSayWhaaa Rolling the window down makes it easier but you can still get the panel off with the window up. The step of lifting the panel up and off is more challenging as the panel is being 'held" by the window.

[MinotaurOmar]

Is this the same for a 1996 toyota Camry?

[1aauto]

@MinotaurOmar Can't say exactly but the methodology would probably be about the same.

[Beibei724]

Everything was obvious except how to pop out the lock trim; your video made it easy. Thanks!