Ive NEver heard the Kenwoods but I know they are a good brand and Prolly bubp good, I bet they have a better SQ then the Boss, but these cheap lil bastards pound
depends on the price you want to spend, AudioQue.com Makes One of the nastiest subs ive owned, A 10" for $229 that will out pound almost anything, 1000 watts RMS 2000 WAtts Peak. But these lil subs are pretty good
thanks man. actually I didn't realise these where the 10''. I was talking for the 12' boss phantom. what would you go for the jbl i told you or for the boss? I am on a very thight budget. cant spend more than 90$ on a sub at the moment, so for the price i think the 12'' boss will be good ?
Plus the JBL is only 350watts RMS these Are 1050 RMS, but they might pound good, id recommend the Boss cause Ive heard em. the JBL will no doubt sound good but how hard it will pound IDK
MOst amps arent 1 ohm stable. and I dont know for sure if the boss's would take that kind of power, but you try, and you can take the peak of a woofer and trow it out the window, the RMS is whats important.
yea running a Dual Voice coil (DVC) subwoofer in paralle (paralle = + to + and - to - on the speaker, and both - to one - on the amp, and both + to one + on the amp) and into one channel cut's the ohm's in half twice. so a DVC 2 ohm or 4 ohm ran paralle and into the same channel on the amp will create a .5 ohm load for the 2 ohm VC, and 1 ohm load for the 4 ohm VC, so if you want to make a 4 ohm DVC subwoofer meet the amp wit a 2 ohm load you would have to use both channels.
Well they are 2100 peak eh ? It's a mono . I'm thinking either 4ohms at 1600 watts , or 2ohm to be at 3000 watts , hmmmmmmm does channel ohms gave a rms ????????
I'm about to install two of these on a mono d. At 1600watts rms (4ohms). Each are roughly 800rms I'm guessn rather then 1050 hey? So 800rms x2 = 1600rms right ? I'm not sure when it comes to mono d and two subs , u times the rms by the amount of subs right ??
I believe thats correct if its a 4 channel amp and you bridge it. these prolly wont handle those kinda watts though mine get hot with a 875 watt Polk Momo bridged at two ohm.s so unless they handle it better at 4 ohms be careful. use your ears and nose to make sure its not gunna trash em :) post vids after though
I had a 12" audioque but thats another sad story, I went smaller subs cause its in a 95 civic hatch, I dont want a lot of unwanted sub weight ya know.
For the Price Yes You really cant go wrong, they do get a little grrainy at times at high volume LOW bass but over al they really are a good sub, dont give them every bit of watt that the spec says. Mine are under powered by spec and im pushing them. ive smelled them getting hot when I pound them real low for a long time whiole cruising. good subs though no complaints. plust htese are my temps till i upgrade.
hey i have a 500 watt amp (visionik) and i was planning on buying 10's of CHAOS Extreme, would they hit hard? someone tell me.
01chevyprizmkid 4 months ago
@01chevyprizmkid
For What they are and the Price Im ver VERY happy with them I will upgrade to a Nicer pair soon but these def held me over.
weclap 4 months ago
whats the demension or sizes on that box i hav the same but the box their jusisnt doin them justice
967527 4 months ago
are these worth getting im debatin to buy one of these
slipknotmaskdude 5 months ago
@slipknotmaskdude
for a budget built yes they are great. dont give them all the RMS though :)
weclap 4 months ago
niceee broo check out my vidss
madison1828 5 months ago in playlist More videos from weclap
yo get the 12" those are much better
xplod414 6 months ago
i have SIX of these subs in my bed of my truck with 5000 watt boss amps these bump take a look plz my channel is putyafistup plz look
putyafistup 7 months ago
what song is that???? bumps good
nickstepanian2 7 months ago
@nickstepanian2
Bass I love you by Basstronic
weclap 7 months ago
@Danieljr012
So far so good, I havent tried jamming them with their RMS watts but they handle big clean power ok
weclap 8 months ago
@Danieljr012
Ive NEver heard the Kenwoods but I know they are a good brand and Prolly bubp good, I bet they have a better SQ then the Boss, but these cheap lil bastards pound
weclap 8 months ago
what shall i put on a peugeot 106 ? one of these or a jbl gto 1214 ? I want the best that pounds the hardest. thanks man please help me
bitlord888 10 months ago
@bitlord888
depends on the price you want to spend, AudioQue.com Makes One of the nastiest subs ive owned, A 10" for $229 that will out pound almost anything, 1000 watts RMS 2000 WAtts Peak. But these lil subs are pretty good
weclap 10 months ago
@weclap
thanks man. actually I didn't realise these where the 10''. I was talking for the 12' boss phantom. what would you go for the jbl i told you or for the boss? I am on a very thight budget. cant spend more than 90$ on a sub at the moment, so for the price i think the 12'' boss will be good ?
bitlord888 10 months ago
@bitlord888
I personally dont know the JBL, nor have i heard it, I have heard a bunch of the Boss Phantom 12's though. they sound great for the money though
weclap 10 months ago
@bitlord888
Plus the JBL is only 350watts RMS these Are 1050 RMS, but they might pound good, id recommend the Boss cause Ive heard em. the JBL will no doubt sound good but how hard it will pound IDK
weclap 10 months ago
@weclap
thanks man, your help was much appreciated. and excellent system btw, nice black marking on the enclosure haha :P
bitlord888 10 months ago
@bitlord888
Thanks bud, Post a video after you get it all get up :)
weclap 10 months ago
@weclap
I will upload it for your reference , cause uploding aint my hobby. But I will do it yeah :-)
bitlord888 10 months ago
MOst amps arent 1 ohm stable. and I dont know for sure if the boss's would take that kind of power, but you try, and you can take the peak of a woofer and trow it out the window, the RMS is whats important.
weclap 10 months ago
yea running a Dual Voice coil (DVC) subwoofer in paralle (paralle = + to + and - to - on the speaker, and both - to one - on the amp, and both + to one + on the amp) and into one channel cut's the ohm's in half twice. so a DVC 2 ohm or 4 ohm ran paralle and into the same channel on the amp will create a .5 ohm load for the 2 ohm VC, and 1 ohm load for the 4 ohm VC, so if you want to make a 4 ohm DVC subwoofer meet the amp wit a 2 ohm load you would have to use both channels.
weclap 10 months ago
If I drop em to 2ohms doesn't that double there rms ??
nevermiss01 10 months ago
Well they are 2100 peak eh ? It's a mono . I'm thinking either 4ohms at 1600 watts , or 2ohm to be at 3000 watts , hmmmmmmm does channel ohms gave a rms ????????
nevermiss01 10 months ago
I'm about to install two of these on a mono d. At 1600watts rms (4ohms). Each are roughly 800rms I'm guessn rather then 1050 hey? So 800rms x2 = 1600rms right ? I'm not sure when it comes to mono d and two subs , u times the rms by the amount of subs right ??
nevermiss01 10 months ago
@nevermiss01
I believe thats correct if its a 4 channel amp and you bridge it. these prolly wont handle those kinda watts though mine get hot with a 875 watt Polk Momo bridged at two ohm.s so unless they handle it better at 4 ohms be careful. use your ears and nose to make sure its not gunna trash em :) post vids after though
weclap 10 months ago
what type of amp are you running?
HHNdude 10 months ago
@HHNdude
a Polk momo c.500 875 watt amp. Bridged at 2 ohms.
weclap 10 months ago
nice set up. u should go bigger tho even just to the 12s im going up to the 15s
JANDERSON81BASSHEAD 11 months ago
@JANDERSON81BASSHEAD
I had a 12" audioque but thats another sad story, I went smaller subs cause its in a 95 civic hatch, I dont want a lot of unwanted sub weight ya know.
weclap 11 months ago
whats this song??
XyManic33 11 months ago
@XyManic33
Bass I l ove you by Bastronic
weclap 11 months ago
what do you got powering those, I got the same subs except there 2300 watts, my amp is 3000 watts, but there not moving a whole lot on two channels.
hitrun4 1 year ago
@hitrun4
I have a Polk Momo C500.1 875 watt amp, Very VERY good Lil amp.
weclap 1 year ago
damn those thing look like they bump. would you recomend them?
spardoc27 1 year ago
@spardoc27
For the Price Yes You really cant go wrong, they do get a little grrainy at times at high volume LOW bass but over al they really are a good sub, dont give them every bit of watt that the spec says. Mine are under powered by spec and im pushing them. ive smelled them getting hot when I pound them real low for a long time whiole cruising. good subs though no complaints. plust htese are my temps till i upgrade.
weclap 1 year ago
tell me if that is a good sub because i want to buy one
krios1125 1 year ago
@krios1125
See my reply to spardoc27. yes they are decent.
weclap 1 year ago