@oligopoly I'm sorry for the delay in getting back to you as I have been out of the office for the holidays. The part number for the servo is LOSB0817.
@HorizonRCdotCom also one quick question.it may be my steering servo or esc but it's sending power to the servo and motor but the servo wont budge thx for info!
I just bought one of these and tried to swap out the spur gear. I removed the rear diff assembly but the drive shaft seemed to be stuck in the diff housing. Is the drive shaft fixed to the diff pinion with a grub screw or is it just a tight fit?
@auswolf350 I can't remember if it's a screw or an e-clip but I do believe there is something retaining it in the rear gearbox if memory serves me right
Hey Horizon Hobby, @ 2:50 into the video, Todd Hodge mentions a DSM/ESC combo receiver that works with their brush-less motors. Would you mind giving me a bit more detail on this and when it will be available? I don't see any part numbers to reference or any coming soon information on the websites anywhere. Your help is greatly apprecaited guys, I am really interested in that DSM/ESC combo receiver for my little Losi cars! Thanks again folks!
@HorizonRCdotCom Is there anyway to investigate this? One of those situations were I have no problem waiting to keep my business with Horizon and Losi, but if there's nothing in the works... that would be nice to know, lol. Thank you very much for you time on this!
@TheRoostCrew As soon as something is announced, if its announced, you'd hear about it first on our Facebook page, the R/Cast podcast and our On the Horizon weekly video
could you charde the battery with the micro t stock charger? cause if it takes a hour to charge for 10-15 run time i wouldnt have the patients to charge it for an hour. no offense..
I really like the micro scene. But I really don't know whether to get the rally car or the sct. I really like them both but I do like offroading. Which should I get and do you recomend brushless
@WeDoThis4Fun LOSB9635 is the part number of the LiPo and yes, the stock motor and esc can handle it. However the will wear the motor out more quickly.
@7coolaznkid Yes and no. For consistency sake it's best to stick with one brand. A 30wt oil from Losi is going to be a little different than a 30wt oil from Trinity/Epic or Team Associated simply due to differences in production.
@10truman You'll need to remove the upper deck of the chassis and the rear gearbox to be able to get the spur gear off. To change the pinion you'll just need to take the top deck off again and remove the motor. The pinion is just a pressure-fit so it slides right on.
@11dajan It comes with a 220mAh 4.8v NiMH battery pack. Breakage has not been an issue, they are really tough and strong. I apologize but I don't know what autko is supposed to be I'm sorry.
can you make a video how to rebuild the shock on the sct 1:24 and if you want to make another video about brushless for sct 1:24 that would be fine too
@overdosed10 It's possible for dirt and debris to enter into the chassis by the opening for the servo arm. This can foul up or damage the gears in the vehicle.
Dear Team Losi, now that you have a micro 4wd sct/rally, here are some more micro ideas: trophy truck, buggy, drifter, truggy, 4wd high roller, and MONSTER JAM MONSTER TRUCK BODYS!!!!
@impakt750 It requires a little bit of modification from what I hear to make it work but it's supposed to. We'll be doing a conversion video shortly after iHobby.
the conversion is easy, all you have to change is the motor and esc to a brushless combo system, i believe its has to be a micro sidewinder motor size like the 280 size motor
suspension? awesome. motor? fair. great little truck for $110. its about the equivalent of putting a diesel in a formula one car. rides real good but lacks umph!
i could not wait around for losi/horizon to produce this brushless ESC/receiver they say they are going to make. i threw in a 10250kv and new ESC and receiver, combined with the 11.1 lipo. the slipper clutch serves its purpose well. the drivetrain handles the power without a problem. its running over 40 mph. see for yourself...
@HorizonRCdotCom theres no easy way to say this besides they simply dont go that fast. brought it back to the shop, they thought it was unusually slow so they tested another one they had and it was just the same.
@HorizonRCdotCom theres no easy way to say this besides they simply dont go that fast. brought it back to the shop, they thought it was unusually slow so they tested another one they had and it was just the same, a little over 6mph-thats factual.
@GambinoSoulja i just picked one up today and am less than impressed with it, whats your thoughts? it hardly goes 5mp maybe 6 or 7, my micro t seems to be quicker(its stock). there seems to be an odd and "unhealthy", if you will, amount of drag on the drive train, is this unusual to to mine? what are your complaints/thoughts about it?
M.A.P Pricing means Minimum Advertised/allowed Price. This is the lowest price a retailer/store can sell them to make maybe $20 dollar prophet for each truck. If there is a lower priced advertised, they bought in bulk and are breaking the law for under selling the little guys.
why is everyone doing that? (excluding Ofna and Traxxas) Instead of updating their 1/10 scales to 4wd, they're just making smaller versions with 4wd. WTF
So... uh Losi/Horizon. When are you going to get back in the 1/10 racing game? The xxx platform has been out for over a decade now. You've lost Trinity as a hop-up manufacture. And your quality has gone down the shitter since Horizon has bought you guys out. These are cool little toys, don't get me wrong I want one too, but you'll never be Traxxas. Get back to what you originally made. Awesome, made in America race buggies and trucks. Not this cheap china garbage. :(
I can't waite to get one of these i have already ordered it from a friend and i was just wondering how fast do u estimate it will go with a lipo in it (measured in mph).
at first i loved micros, i got the micro baja , the micro desrt and micro high roller, they are the same crap , i love it when i use it becouse of the speed they got but i cant use it twice , always something has to brake or not work , i just run them in ths street, i dont jump with them , nothing, just speed runs. i hope losi fix the tranny problems in this vehicles and the steering.
@chechubelo the driveline and transmission is totally redesigned and new to these vehicles. There are about 3 parts in total that cross over from previous 1/36-scale vehicles to these.
Whats the scoop with driving on dirt with this one. In the Rally video he said that it isnt advised to drive on dirt but what about this one? It kinda defeats the pupose if you cant drive this on a "short course". If not, would you be able to fix/cover the hole near the servo?
Hey Losi i LOVE your products i have 3 micro DT's 2 micro T's and 1 Micro High Roller and am getting a micro SCT can u guys make a micro 4wd monster truck with a 1.5 to 1.75 inch ground clearance it would be a huge hit and have a tone of other cool stuff on it like brushless Lipo and wheelie bar oil filled shocks and paddle tire and street slicks thanks and think about what i gave u for an idea :):):):) :):):)
hey just wondering why cant they make a better ground clearance 4wd micro? like a 1.5 inch-2inch ground clearance and include some oil filled shocks and a brushless lipo system and full ball bearing i would love one of that can you tell them to make one?
few elephants hanging around, width/wheelbase looks a little square, what kind of replacement body shells will be available/fit? (mini-z/20th scale models can be made to work for the micro crawler)
drift? tires, one way diffs, etc. he did mention spring rates.
why o why is the servo a five wire? what if i wanted to put in a gyro or dbox (space permitting) without replacing all the electronics cept the motor? or even a more powerful one??
@normanthehobbiest Check out our UStream page as I recorded a video last Thursday that showed a size comparison between the two. UStream.tv and look for HorizonHobby-com.
These new 1/24 look incredible! It would be awesome if the rally car version could have actual rally car bodies! (Ford Focus, Subaru WRX, etc)! Great work HH/Losi!
all I can say is......WOW, and damn you losi, making me having to buy another micro. Real question is which to buy, rally car or sct, They both look real nice.
@TheDaverob123 get both aha, but i would get rallly if u have a full size sct, just because uts cool to be driveing somethin different, i will prob getting the rally JS!!!!
@HorizonRCdotCom Ya, But I am probably going to buy a go pro hd and some other accessories first before this and I do plan to wait on the bnd version cuz that would be beast on my Dx3s =). But now about getting both idk I prefer short course trucks over a rally car but the rally car looks so bomb making this a tough decision losi. =(
I used too like losi.
Too bad so sad.
droopmodMRC 1 month ago
hey no one replyed to me :(
loilipopful 2 months ago
@oligopoly I'm sorry for the delay in getting back to you as I have been out of the office for the holidays. The part number for the servo is LOSB0817.
HorizonRCdotCom 2 months ago
@HorizonRCdotCom thank you very much happy holidays
loilipopful 2 months ago
@HorizonRCdotCom also one quick question.it may be my steering servo or esc but it's sending power to the servo and motor but the servo wont budge thx for info!
loilipopful 2 months ago
my steering servo dosent work can u send me a replacement/parts number thank you for your help!
loilipopful 2 months ago
how much would this be
deserttruck14 2 months ago
Does the rally body fit on the SCT?
richmotherfer 2 months ago
@richmotherfer Yes, but you'll need different bumpers, body mounts and obviously the wheels and tires too.
HorizonRCdotCom 2 months ago
can this thing go on snow
7coolaznkid 3 months ago
@7coolaznkid It is not waterproof so we would not recommend it.
HorizonRCdotCom 3 months ago
can the micro crawler tiers fit on this sct?
TrichbeeT 3 months ago
why does my pinion gear get chewed up?
aricars6263 6 months ago
@aricars6263 mine are to after two days, just get metal gears, thats what im doing :)
littleleahyea 4 months ago
@littleleahyea thanx!
aricars6263 4 months ago
My losi micro sct should be at my house in the mail on Monday can't wait
racingfan378 6 months ago
51 people are really clever
nitroairplane 7 months ago
i thing i will buy it but how much the brushless combo? where i can buy it?
slash4x4lipo 9 months ago
Comment removed
FOVA96 9 months ago
@FOVA96 We don't. It might be a YouTube issue. Can you send me an example?
HorizonRCdotCom 9 months ago
Comment removed
FOVA96 9 months ago
@HorizonRCdotCom
rghost.ru/5954001/image.png
Thanks for the answer
FOVA96 9 months ago
@FOVA96 Can't view an image here unfortunately. You can e-mail us at the editors@horizonRC e-mail address if you'd like.
HorizonRCdotCom 9 months ago
I just bought one of these and tried to swap out the spur gear. I removed the rear diff assembly but the drive shaft seemed to be stuck in the diff housing. Is the drive shaft fixed to the diff pinion with a grub screw or is it just a tight fit?
auswolf350 10 months ago
@auswolf350 I can't remember if it's a screw or an e-clip but I do believe there is something retaining it in the rear gearbox if memory serves me right
HorizonRCdotCom 9 months ago
@HorizonRCdotCom if you were to convert this truck to lipo, what would be a good lipo battery for it? please respond
CSX8663 9 months ago
Hey Horizon Hobby, @ 2:50 into the video, Todd Hodge mentions a DSM/ESC combo receiver that works with their brush-less motors. Would you mind giving me a bit more detail on this and when it will be available? I don't see any part numbers to reference or any coming soon information on the websites anywhere. Your help is greatly apprecaited guys, I am really interested in that DSM/ESC combo receiver for my little Losi cars! Thanks again folks!
TheRoostCrew 10 months ago
@TheRoostCrew There has been nothing announced or released by Losi at this point.
HorizonRCdotCom 10 months ago
@HorizonRCdotCom Is there anyway to investigate this? One of those situations were I have no problem waiting to keep my business with Horizon and Losi, but if there's nothing in the works... that would be nice to know, lol. Thank you very much for you time on this!
TheRoostCrew 10 months ago
@TheRoostCrew As soon as something is announced, if its announced, you'd hear about it first on our Facebook page, the R/Cast podcast and our On the Horizon weekly video
HorizonRCdotCom 9 months ago
Any ETA as to when the BND versions will be coming out?
bluefisherking 10 months ago
Where is that park at?
cesar11duran 10 months ago
@cesar11duran southern California near Ontario
HorizonRCdotCom 10 months ago
@HorizonRCdotCom Whats it called? Is it near Team Losi inc.? Address?
cesar11duran 10 months ago
@cesar11duran It's a public park. I don't know where exactly as it is not something we (HorizonRCdotCom) filmed but something they shot out there.
HorizonRCdotCom 10 months ago
@HorizonRCdotCom Whats the name of the park? Address? Can you by their products at Team Losi inc.?
cesar11duran 10 months ago
0 dislikes.
i can see why!
tomtom4867 10 months ago
Any word on the dsm/ bnd version
jordanwinter2009 11 months ago
could you charde the battery with the micro t stock charger? cause if it takes a hour to charge for 10-15 run time i wouldnt have the patients to charge it for an hour. no offense..
TractorPuller180 11 months ago
What is the diameter of the wheels?
DanteJGZ 11 months ago
I really like the micro scene. But I really don't know whether to get the rally car or the sct. I really like them both but I do like offroading. Which should I get and do you recomend brushless
MultiLegomad 11 months ago
what lipo battery do you recommend, if the motor esc combo can handle it that is
WeDoThis4Fun 1 year ago
@WeDoThis4Fun LOSB9635 is the part number of the LiPo and yes, the stock motor and esc can handle it. However the will wear the motor out more quickly.
HorizonRCdotCom 1 year ago
um does it matter which brand of oil do you use on the shocks
7coolaznkid 1 year ago
@7coolaznkid Yes and no. For consistency sake it's best to stick with one brand. A 30wt oil from Losi is going to be a little different than a 30wt oil from Trinity/Epic or Team Associated simply due to differences in production.
HorizonRCdotCom 1 year ago
@HorizonRCdotCom well i have micro sct so i use losi 30wt oil right
7coolaznkid 1 year ago
I mean how come the battery in addition to the 4.8 v 220 mah.
11dajan 1 year ago
how fast is it compared to the micro desert truck
stevenrocks1 1 year ago
how do u change the gear do u have to take off the full dif.
10truman 1 year ago
@10truman You'll need to remove the upper deck of the chassis and the rear gearbox to be able to get the spur gear off. To change the pinion you'll just need to take the top deck off again and remove the motor. The pinion is just a pressure-fit so it slides right on.
HorizonRCdotCom 1 year ago
Siemka not speak good English, but I have a few questions:
What battery will come to this car (Losi Micro short course)?
Can you recommend a autko?
Will ye fast breaks? (if at all to spoil)
Sorry if these questions have already been
I use google translator so please write with no errors
Thank you in advance;)
11dajan 1 year ago
@11dajan It comes with a 220mAh 4.8v NiMH battery pack. Breakage has not been an issue, they are really tough and strong. I apologize but I don't know what autko is supposed to be I'm sorry.
HorizonRCdotCom 1 year ago
Hi, could you let me know about upgrades for this car.
LiPo
Run time? Speed compare to NiMH?
Micro High-Power Motor:
Comparison with based motor?
Is there any other useful upgrades?
Thanks.
mchalek8 1 year ago
can it use 2s 7.4v lipo 300mah
7coolaznkid 1 year ago
can this use the 3s lipo
7coolaznkid 1 year ago
is there drifting tires for sct because i want to drift with sct 1:24
7coolaznkid 1 year ago
can this thing drive on snow
7coolaznkid 1 year ago
@7coolaznkid It is not water proof or water resistant so I wouldn't recommend it.
HorizonRCdotCom 1 year ago
@HorizonRCdotCom give me 5 minutes a tube of silicone and slickaflex and it will be waterproof and water resistant XD
AussieDuratrax 1 year ago
@7coolaznkid just drove mine in like 1/2 in. of snow, not water resistant but it resists water....lol
BackYardBashers137 1 year ago
can you make a video how to rebuild the shock on the sct 1:24 and if you want to make another video about brushless for sct 1:24 that would be fine too
7coolaznkid 1 year ago
@7coolaznkid Working on the Brushless conversion first, shock rebuild is a good suggestion.
HorizonRCdotCom 1 year ago
@HorizonRCdotCom do you think that losi should make a 1:24 drift cars
7coolaznkid 1 year ago
can you put a BB motor in it
KTMBOY1112 1 year ago
ok thank you
7coolaznkid 1 year ago
wat weight of oil do i get for the sct 1:24 shock
7coolaznkid 1 year ago
@7coolaznkid I believe the kit oil is 30wt
HorizonRCdotCom 1 year ago
can you put on different wheels
7coolaznkid 1 year ago
@7coolaznkid The only wheels I know of that fit are the ones for the Rally Car.
HorizonRCdotCom 1 year ago
@HorizonRCdotCom ok
7coolaznkid 1 year ago
can it go on dirt?
overdosed10 1 year ago
@overdosed10 It is not recommended to run in dirt.
HorizonRCdotCom 1 year ago
@HorizonRCdotCom why not?
overdosed10 1 year ago
@overdosed10 It's possible for dirt and debris to enter into the chassis by the opening for the servo arm. This can foul up or damage the gears in the vehicle.
HorizonRCdotCom 1 year ago
@HorizonRCdotCom not even dust dirt or dry dirt i'm not talking about mudd
overdosed10 1 year ago
@HorizonRCdotCom why not? ^^
overdosed10 1 year ago
is that waterproof
7coolaznkid 1 year ago
@7coolaznkid It is not
HorizonRCdotCom 1 year ago
idk what to get the rally car or the truck
elerymartin 1 year ago
do you know how much it costs in a rtr package?
gladiatortarantula 1 year ago
@gladiatortarantula They're completely RTR out of the box so $109.99
HorizonRCdotCom 1 year ago
Nice concept...Offer a "traditional" servo, or you'll soon be competing with AirHogs!
poohtray 1 year ago
Does it have open differentials or are they locked?
jordanwinter2009 1 year ago
could you put the wheels for the rally on the sct?
limbojrjr 1 year ago
@limbojrjr You could but you may run into clearance issues on the body
ProofingLosi 1 year ago
which one is better the 1/24 4wd sct or the 1/18 mini dt
1999sniper 1 year ago
@1999sniper I don't think you can really say one is better than the other, they're just...different.
HorizonRCdotCom 1 year ago
@1999sniper im trying to sell my mini 1/18 dt, if your intrested hit me up with a personal message.
KTMBOY1112 1 year ago
Dear Team Losi, now that you have a micro 4wd sct/rally, here are some more micro ideas: trophy truck, buggy, drifter, truggy, 4wd high roller, and MONSTER JAM MONSTER TRUCK BODYS!!!!
cesar11duran 1 year ago
whens the review coming
camaromanss27 1 year ago
@camaromanss27 It's live now, check our channel.
HorizonRCdotCom 1 year ago
what is the ground clearance
TheCarguy05 1 year ago
does anyone know if theres any difference between the micro sct and the micro rally besides the body?
matt24765 1 year ago
@matt24765 The front and rear bumpers, the body mounts, wheels, tires and bodies are different.
HorizonRCdotCom 1 year ago
does anyone know if i buy the sct can i put the rally body on if i use velcro
kx100sublimekx100 1 year ago
@kx100sublimekx100 No, but you can easily just swap out the bumpers and shock towers for a few dollars and have your SCT :)
HorizonRCdotCom 1 year ago
@kx100sublimekx100 you acually can if you take out the body clip towersbecuz the if
TheCarguy05 1 year ago
This has been flagged as spam show
@kx100sublimekx100 you acually can if you take out the body clip towers
TheCarguy05 1 year ago
hey i got the sct does the xeloron brushless from the micro t ect fit in this or is ther a separet one out
impakt750 1 year ago
@impakt750 It requires a little bit of modification from what I hear to make it work but it's supposed to. We'll be doing a conversion video shortly after iHobby.
HorizonRCdotCom 1 year ago
micro sct is a little wide
TheLitDynamite 1 year ago
can you get this truck brushless motor
monkeyzgonecrazzy 1 year ago
@monkeyzgonecrazzy It doesn't come with brushless but you can buy the brushless ESC and Motor separately
HorizonRCdotCom 1 year ago
where is that place where your running the truck at
cesar11duran 1 year ago
the conversion is easy, all you have to change is the motor and esc to a brushless combo system, i believe its has to be a micro sidewinder motor size like the 280 size motor
DarkSkysify 1 year ago
i like them slow, that way they look more real
CaptCamping 1 year ago
suspension? awesome. motor? fair. great little truck for $110. its about the equivalent of putting a diesel in a formula one car. rides real good but lacks umph!
i could not wait around for losi/horizon to produce this brushless ESC/receiver they say they are going to make. i threw in a 10250kv and new ESC and receiver, combined with the 11.1 lipo. the slipper clutch serves its purpose well. the drivetrain handles the power without a problem. its running over 40 mph. see for yourself...
DustyonTA 1 year ago
omg it has same parts as slash hahahha micro slash
TheArceus911able 1 year ago
i have this car. it is awesome
kirkp1000 1 year ago
Nice !!!!!!!!!!!!!!!
budbartos 1 year ago
I am loving my new truck. It is very well built and the out of the box speed surprised me. Cant wait for brushless/lipo mod.
rjmeeks2002 1 year ago
is that video of it with a lipo and/or brushless setup in it? becuase mines not even CLOSE to that fast
redfour504life 1 year ago
@redfour504life The running footage is of the car stock.
HorizonRCdotCom 1 year ago
@HorizonRCdotCom theres no easy way to say this besides they simply dont go that fast. brought it back to the shop, they thought it was unusually slow so they tested another one they had and it was just the same.
redfour504life 1 year ago
@HorizonRCdotCom theres no easy way to say this besides they simply dont go that fast. brought it back to the shop, they thought it was unusually slow so they tested another one they had and it was just the same, a little over 6mph-thats factual.
redfour504life 1 year ago
nice truck got one today but i was wondering can you upgrade it to a brushless and if you can what do u have to replace
GambinoSoulja 1 year ago
@GambinoSoulja i asked the same thing to horizon he said you probabley can you just need to get the 1/36 xcelrion brushless combo
TheCarguy05 1 year ago
@GambinoSoulja You can and I will be doing a tutorial soon on how to do the conversion.
HorizonRCdotCom 1 year ago
@GambinoSoulja i just picked one up today and am less than impressed with it, whats your thoughts? it hardly goes 5mp maybe 6 or 7, my micro t seems to be quicker(its stock). there seems to be an odd and "unhealthy", if you will, amount of drag on the drive train, is this unusual to to mine? what are your complaints/thoughts about it?
redfour504life 1 year ago
@GambinoSoulja yes. i did mine. its on my page. 44 MPH weeeee
DustyonTA 1 year ago
how long does it take to charge a battery?thanks
chicostaxxs007 1 year ago
@chicostaxxs007 1hr
redfour504life 1 year ago
It looks SO wide and does not have the 2.4 radio like the crawler.
Harvz78 1 year ago
how fast does it go stock
rcrules1 1 year ago
M.A.P Pricing means Minimum Advertised/allowed Price. This is the lowest price a retailer/store can sell them to make maybe $20 dollar prophet for each truck. If there is a lower priced advertised, they bought in bulk and are breaking the law for under selling the little guys.
ravenlorans 1 year ago
why is everyone doing that? (excluding Ofna and Traxxas) Instead of updating their 1/10 scales to 4wd, they're just making smaller versions with 4wd. WTF
REXXDG134 1 year ago
Micros ftw
stevenrocks1 1 year ago
where i live they are coming out on monday cant wait!
normanthehobbiest 1 year ago
are these brushless or what?
redfour504life 1 year ago
@redfour504life They are brushed
HorizonRCdotCom 1 year ago
So... uh Losi/Horizon. When are you going to get back in the 1/10 racing game? The xxx platform has been out for over a decade now. You've lost Trinity as a hop-up manufacture. And your quality has gone down the shitter since Horizon has bought you guys out. These are cool little toys, don't get me wrong I want one too, but you'll never be Traxxas. Get back to what you originally made. Awesome, made in America race buggies and trucks. Not this cheap china garbage. :(
TracingPeeps 1 year ago
its pretty slick out there?
themicromodder 1 year ago
i really want one of these, very cool! how fast do they go stock?
tylrpnk99 1 year ago
@tylrpnk99 they go about 13-16 mph. depends if you are using lipo
mikeamerica0830 1 year ago
im getting one of these and i was just wondering about how fast do u think it will go with the lipo in it (mph)
etube242 1 year ago
I can't waite to get one of these i have already ordered it from a friend and i was just wondering how fast do u estimate it will go with a lipo in it (measured in mph).
etube242 1 year ago
@etube242 I haven't seen it run with a LiPo as of yet so I don't know, sorry.
HorizonRCdotCom 1 year ago
@HorizonRCdotCom thanks for the help ill keep looking it up if u find anything more plz message me about it
etube242 1 year ago
@HorizonRCdotCom thanks for the help please message me if u find anything else about it that hasnt been shown in the video
etube242 1 year ago
Comment removed
redfour504life 1 year ago
at first i loved micros, i got the micro baja , the micro desrt and micro high roller, they are the same crap , i love it when i use it becouse of the speed they got but i cant use it twice , always something has to brake or not work , i just run them in ths street, i dont jump with them , nothing, just speed runs. i hope losi fix the tranny problems in this vehicles and the steering.
chechubelo 1 year ago
@chechubelo the driveline and transmission is totally redesigned and new to these vehicles. There are about 3 parts in total that cross over from previous 1/36-scale vehicles to these.
HorizonRCdotCom 1 year ago
@HorizonRCdotCom are they plastic?
chechubelo 1 year ago
are the tranny in this vehicles as crap as a micro-t tranny?
chechubelo 1 year ago
Whats the scoop with driving on dirt with this one. In the Rally video he said that it isnt advised to drive on dirt but what about this one? It kinda defeats the pupose if you cant drive this on a "short course". If not, would you be able to fix/cover the hole near the servo?
FMFracing24 1 year ago
Hey Losi i LOVE your products i have 3 micro DT's 2 micro T's and 1 Micro High Roller and am getting a micro SCT can u guys make a micro 4wd monster truck with a 1.5 to 1.75 inch ground clearance it would be a huge hit and have a tone of other cool stuff on it like brushless Lipo and wheelie bar oil filled shocks and paddle tire and street slicks thanks and think about what i gave u for an idea :):):):) :):):)
airsoftgennies 1 year ago
hey just wondering why cant they make a better ground clearance 4wd micro? like a 1.5 inch-2inch ground clearance and include some oil filled shocks and a brushless lipo system and full ball bearing i would love one of that can you tell them to make one?
YourFriendlyMe 1 year ago
then there gonna make a mini next year, pretty sure about that
austinkx09 1 year ago
OMG I WANT ONE!
nerdykid136 1 year ago
few elephants hanging around, width/wheelbase looks a little square, what kind of replacement body shells will be available/fit? (mini-z/20th scale models can be made to work for the micro crawler)
drift? tires, one way diffs, etc. he did mention spring rates.
why o why is the servo a five wire? what if i wanted to put in a gyro or dbox (space permitting) without replacing all the electronics cept the motor? or even a more powerful one??
jtet420 1 year ago
this is going to be so cool becuase theres a bmx track where i live i have to try this thing out there
normanthehobbiest 1 year ago
is that faster than a micro t and if it is how much
normanthehobbiest 1 year ago
how big are those compared to a micro t and wat should i get a micro dt or micro sct
normanthehobbiest 1 year ago
@normanthehobbiest Check out our UStream page as I recorded a video last Thursday that showed a size comparison between the two. UStream.tv and look for HorizonHobby-com.
HorizonRCdotCom 1 year ago
4 wheel drive, front & rear diffs, cvd's,threaded oil shocks, hell i am very interested!!
YAGO323 1 year ago
Did you got a chance to drive one? how does it feel?
94offroad 1 year ago
is it okay to drive them in dirt?
xmodpro234 1 year ago
@xmodpro234 i dont think so sadly
normanthehobbiest 1 year ago
getting one for my birth day cant wait
SAVAGERULES123 1 year ago
...Can you say micro 4wd buggy conversion?
I'm definitely grabbing one of these. Way to go, Losi! Looks amazing!
jeffman3 1 year ago
When can we buy it in Germany? I want one...
Exocet1992 1 year ago
please don't disappoint me like the sc18
1perez454 1 year ago
These new 1/24 look incredible! It would be awesome if the rally car version could have actual rally car bodies! (Ford Focus, Subaru WRX, etc)! Great work HH/Losi!
eurozx5 1 year ago
all I can say is......WOW, and damn you losi, making me having to buy another micro. Real question is which to buy, rally car or sct, They both look real nice.
TheDaverob123 1 year ago
@TheDaverob123 get both aha, but i would get rallly if u have a full size sct, just because uts cool to be driveing somethin different, i will prob getting the rally JS!!!!
TecIsAwesome 1 year ago
@TheDaverob123 The answer is easy...
BOTH! :)
HorizonRCdotCom 1 year ago
@HorizonRCdotCom Ya, But I am probably going to buy a go pro hd and some other accessories first before this and I do plan to wait on the bnd version cuz that would be beast on my Dx3s =). But now about getting both idk I prefer short course trucks over a rally car but the rally car looks so bomb making this a tough decision losi. =(
TheDaverob123 1 year ago
@TheDaverob123 i got the same problem...i cant pick one!! :'(
deadeye120596 1 year ago
Such a great idea guys! I may have to make a scale track for these guys!
UltimateRCnetwork 1 year ago
wow cant wait! bL dsm....darn it . ship it already.
sanuksize45 1 year ago
Are these durable? For me, Losi trucks tend to break fairly easily in some places.
13ig13oyz 1 year ago
so i just bought the micro desert truck
i could of waited and bought the 4wd rally car or this truck
kinda sucks that these are a 4wd
BIGb0z014 1 year ago
Geez!, Losi has benn buzy making on of there. They are increadlble. 4WD,
realistic looks. bumpera and the first stock short course stock beadlocks. If only there were 1/24 scaald races I get one. Good on ya Losi!
RCBuggy100 1 year ago
Are these on the market at the time?
Thanks,
Giovanni
crazybearrc 1 year ago