I wanted to get your opinion being that you have several WE guns. If u could only buy one witch one would you buy the WE G39C or the WE PDW? I've been try to get a GBBR but can not make up my mind on witch one to get, I would be using it manly for cqb. any advice you can give will helpful.. thanks
@airsoft1232 why of course! it may be hard though, WE tech glues their orange tips on so you might have to put it under heat before removing the fash hider
@AsianJewAirsofter like what type of heat, i know of hot water might help but if there is anything else that might be quicker let me know! and im afraid to bend the barrel of the gun since i tried to take it off with a long screw driver and i didnt budge, so yeah thanks!!!
@airsoft1232 sorry for the late response. the most effective kind of heat is by a torch, or intense, direct heat.... that should do fine, its what i do when i take my flash hiders off
yeah main gas are propanes maybe thats why its not staying in place..super glue? will it work on metal? because the ball bearings need to be like rolling back and forth to make it smooth right or was there something that im missing?
@G4ttsu surprisingly super glue will work on the metal of the M4 type trigger assembly, however when you glue.. make sure that you are only gluing the outer couple milimeters of the pin so it is being glued into the trigger assembly while still being able to roll back and forth
thx but now that my gun has bigger problems with it i cant even play with it..the needle holds theball bearings for the hammer got loose and wouldnt stay on so everytime i shot it ..itwould just come off..any help ??
@G4ttsu that happened to my scar and my first m4a1. the only help i can give is to either super glue the outermost of the pin into the trigger assembly and see if that keeps it in. unfortunately when it happened to my PDW, the pin fell out and i couldnt locate it :( . I HAD TO GUY A WHOLE NEW TRIGGER ASSEMBLY KIT AND ASSEMBLE IT AND INSTALL. which was a pain in my asian ass. things are more likely to fall out of place if you use red gas or Propane but i take that risk
Hey i have a question about my WE g39c..recently its been working good but after awhile the feeding of the bbs doesnt work for some reason..like bbs would just fall out from the barrel..any clue to this?? id appreciate it..
@G4ttsu srry for the late response! but i have had that problem before, that indicated that there are multiple bbs in the chamber and there is not enough gas to propel the bb out of the barrel. so! o would suggest trying to use a different kind of bb for a while until things become back to normal and then try to use your regular bbs, if this does not work. PM me and i will try to help you out even further
Hi lazy ass idiot, if you cant even find the hop up on this unit, you are destined to be a loser.
The hop up was made in such a way it was easy to find + easy to adjust.
+ you could have found that information on websites and in your fucking MANUAL!!!!! people too lazy to read their fucking manual should be ignored on boards and forums!
@MrMuthaUcker according to James from WE Tech Airsoft.. i spoke to him at evike.com superstore.. however i havent got a chance to load the MAG one BB at a time.. so i wouldnt know.. so i was just going by what james said..
@TheDigitalReviewer i bought my iMac( what i film on) after i got my iPhone 4 which has an exelent camera! i bought the iMac thinking that it would have an amazing camera like the iPhone but..as you can tell.. i will be getting another camera ;)
@AsianJewAirsofter Alright awesome, im gana be receiving this gun in a few days, and i heard the manual was mostly in other languages.. Plus i'd rather see someone who already has the gun to show me. Thanks again :) im going to subscribe
@Jscar45 to answer you question(a little late). it does indeed have negative threads and like other WE tech GBB rifles, the orange tip is GLUED on so if you want to get it off,, you must put it under a lot of heat!.
Wrong, my Scar has a positive thread. Not all WE gbbr have the same thread, so be sure you check it out with your seller what kind of he sold you so you dont buy a wrong silencer or externa barrel extension.
@Chenipherc77 like all of my GBBr's flashiders, they eventually come off.. because of a 14 day warranty, i hesitate to try to take it off. by november 10-14 i will try to do an acuracy test for all of my rifles and show it with hopefully no orange tip.. as for it painted orange, it probably is...
@Chenipherc77 And yes it has threads. 14mm positive threads for Mock Silencers or black flash hiders. And yes the tip comes standered blazing orange tip for safety reasons. You can take of the orange tip and play at your house, but while traveling you have to have the orange tip on or when you are playing at a airsoft field. And do not paint the tip or lose it if you paint it airsoft fields will not let you play. and dont lose for the same reason.
@EmoBaggage -------- i dont know the exact rate of fire but it is quite high compared to my other GBBr's ROFs. as for the accuracy, i tested a range of 200 FT and my markers were about 2 inches down and 1 inch left of center mass
I wanted to get your opinion being that you have several WE guns. If u could only buy one witch one would you buy the WE G39C or the WE PDW? I've been try to get a GBBR but can not make up my mind on witch one to get, I would be using it manly for cqb. any advice you can give will helpful.. thanks
mexwr 2 months ago
can you take off the orange flash hider?
airsoft1232 2 months ago
@airsoft1232 why of course! it may be hard though, WE tech glues their orange tips on so you might have to put it under heat before removing the fash hider
AsianJewAirsofter 2 months ago
@AsianJewAirsofter like what type of heat, i know of hot water might help but if there is anything else that might be quicker let me know! and im afraid to bend the barrel of the gun since i tried to take it off with a long screw driver and i didnt budge, so yeah thanks!!!
airsoft1232 2 months ago
@airsoft1232 sorry for the late response. the most effective kind of heat is by a torch, or intense, direct heat.... that should do fine, its what i do when i take my flash hiders off
AsianJewAirsofter 2 months ago
@AsianJewAirsofter
I guess I'll give it a try and see if it works..the plastic lever where u cock the gun broke on mines lol.. can u even replace that?
G4ttsu 10 months ago
@AsianJewAirsofter
yeah main gas are propanes maybe thats why its not staying in place..super glue? will it work on metal? because the ball bearings need to be like rolling back and forth to make it smooth right or was there something that im missing?
G4ttsu 10 months ago
@G4ttsu surprisingly super glue will work on the metal of the M4 type trigger assembly, however when you glue.. make sure that you are only gluing the outer couple milimeters of the pin so it is being glued into the trigger assembly while still being able to roll back and forth
AsianJewAirsofter 10 months ago
@AsianJewAirsofter
thx but now that my gun has bigger problems with it i cant even play with it..the needle holds theball bearings for the hammer got loose and wouldnt stay on so everytime i shot it ..itwould just come off..any help ??
G4ttsu 10 months ago
@G4ttsu that happened to my scar and my first m4a1. the only help i can give is to either super glue the outermost of the pin into the trigger assembly and see if that keeps it in. unfortunately when it happened to my PDW, the pin fell out and i couldnt locate it :( . I HAD TO GUY A WHOLE NEW TRIGGER ASSEMBLY KIT AND ASSEMBLE IT AND INSTALL. which was a pain in my asian ass. things are more likely to fall out of place if you use red gas or Propane but i take that risk
AsianJewAirsofter 10 months ago
Hey i have a question about my WE g39c..recently its been working good but after awhile the feeding of the bbs doesnt work for some reason..like bbs would just fall out from the barrel..any clue to this?? id appreciate it..
G4ttsu 10 months ago
@G4ttsu srry for the late response! but i have had that problem before, that indicated that there are multiple bbs in the chamber and there is not enough gas to propel the bb out of the barrel. so! o would suggest trying to use a different kind of bb for a while until things become back to normal and then try to use your regular bbs, if this does not work. PM me and i will try to help you out even further
AsianJewAirsofter 10 months ago
@AsianJewAirsofter
Hello again ..is it normal when i charge up my mag and it has a hissing sound on the charging valve??..or is it because it is not tight enough??
G4ttsu 1 year ago
@G4ttsu that means you are overcharging it with gas or it is leaking... and no it is definately not normal!! :)
AsianJewAirsofter 1 year ago
I KNOW THAT KID
kazalor 1 year ago
@kazalor you found me!!!
AsianJewAirsofter 1 year ago
You look the the Reviewer for RedWolfAirsoft LOL
AirsoftSeatttle 1 year ago
@M9gasblowbacka
Hi lazy ass idiot, if you cant even find the hop up on this unit, you are destined to be a loser.
The hop up was made in such a way it was easy to find + easy to adjust.
+ you could have found that information on websites and in your fucking MANUAL!!!!! people too lazy to read their fucking manual should be ignored on boards and forums!
Erikootje 1 year ago
@M9gasblowbacka i will make a short video to show u cu its hard to explain
AsianJewAirsofter 1 year ago
does it realy hold 39
MrMuthaUcker 1 year ago
@MrMuthaUcker according to James from WE Tech Airsoft.. i spoke to him at evike.com superstore.. however i havent got a chance to load the MAG one BB at a time.. so i wouldnt know.. so i was just going by what james said..
AsianJewAirsofter 1 year ago
@TheDigitalReviewer i bought my iMac( what i film on) after i got my iPhone 4 which has an exelent camera! i bought the iMac thinking that it would have an amazing camera like the iPhone but..as you can tell.. i will be getting another camera ;)
AsianJewAirsofter 1 year ago
can you make a video of what parts to lub?
ZigZag1808 1 year ago
@ZigZag1808 yeah. for sure.. just give me a couple of days and i will have it up :)
AsianJewAirsofter 1 year ago
@AsianJewAirsofter Alright awesome, im gana be receiving this gun in a few days, and i heard the manual was mostly in other languages.. Plus i'd rather see someone who already has the gun to show me. Thanks again :) im going to subscribe
ZigZag1808 1 year ago
@ZigZag1808 thanks for subscribing.. any private comments or questions.. just inbox me
AsianJewAirsofter 1 year ago
Actually, you first remove the handguard :P
milzbrrrrand 1 year ago
its meant for milsim/milsimers (like myself) - so 30rd is good :D
hotice009 1 year ago
@hotice009 me as well! its amazing... also i enjoy some weight added to my loadout from the magazines!
AsianJewAirsofter 1 year ago
Does it have threads?
Jscar45 1 year ago
@Jscar45 well. from the looks of it i would say no but i wouldnt know until i take it off with a torch.
AsianJewAirsofter 1 year ago
@Jscar45 to answer you question(a little late). it does indeed have negative threads and like other WE tech GBB rifles, the orange tip is GLUED on so if you want to get it off,, you must put it under a lot of heat!.
AsianJewAirsofter 1 year ago
@AsianJewAirsofter cool, Thanks
Jscar45 1 year ago
@AsianJewAirsofter
Wrong, my Scar has a positive thread. Not all WE gbbr have the same thread, so be sure you check it out with your seller what kind of he sold you so you dont buy a wrong silencer or externa barrel extension.
Erikootje 1 year ago
I wish this gun had a large magazine capacity instead of 30 rounds, at least 45 or 50
Chenipherc77 1 year ago
Can you take off the flashhider? and is the flashhider painted orange
Chenipherc77 1 year ago
@Chenipherc77 like all of my GBBr's flashiders, they eventually come off.. because of a 14 day warranty, i hesitate to try to take it off. by november 10-14 i will try to do an acuracy test for all of my rifles and show it with hopefully no orange tip.. as for it painted orange, it probably is...
AsianJewAirsofter 1 year ago
@Chenipherc77 And yes it has threads. 14mm positive threads for Mock Silencers or black flash hiders. And yes the tip comes standered blazing orange tip for safety reasons. You can take of the orange tip and play at your house, but while traveling you have to have the orange tip on or when you are playing at a airsoft field. And do not paint the tip or lose it if you paint it airsoft fields will not let you play. and dont lose for the same reason.
chris88263 1 year ago
Peace out, jew.
SecretAsianMan0 1 year ago
Its very Sexy, I might have to get it, for my next purchase. awesome review
A1rsoftMH88 1 year ago
199$ everywhere
evike, ehobbyasia, WGC shop, Airsoftglobal
so for people in Europe, get your stuff in Asia, since Evike is slow for Europe
Erikootje 1 year ago
Whats the rof and range?
EmoBaggage 1 year ago
@EmoBaggage -------- i dont know the exact rate of fire but it is quite high compared to my other GBBr's ROFs. as for the accuracy, i tested a range of 200 FT and my markers were about 2 inches down and 1 inch left of center mass
AsianJewAirsofter 1 year ago