I have a big problem my samsung wave s8500 doesnt turn up again after a bad flash i can only go to download mode please what should i do to have bada 1.0 again because the computer doesnt detect the phone pleeeasseeee HELP!!!
My bootloader broke(I didn't flash it or anything just put some music on and took it out, turned it off the next day and then my phone wouldn't load up)
It's stuck on the samsung screen and won't come off, can't even turn it off with out removing battery.
SOOO! I got told I have to flash it, the problem being is I have no Idea how to remove sim lock because I can't actually get in to the phone to put the unlock code in...
Hey, I have a samsung wave s8500 and am upgrading to JL2 1.2 using multiloader.... i have s8500DTJF2 - 1.0 at the moment and wanting to dual boot android, but my boot loader is not the one of the ones in the list,,,, i was told i needed a XXJL2 boot loader....iv got the full firmware but am unsure of which file is the boot file, and i dont want to corrupt the boot :(
i tried multiloader when he downloads the files to the phone the USB cable is unplugged when te screen said wait to reset so the firmware is'nt fully downloaded
now i don't have any firmware on my phone and when i looked at my screen it says Wait to reset when i start up it gives me a orange screen and when i put in download mode my pc says : cannot find the wave driver so i tried everything to find the driver but no
@HMundane i just upgraded my WAVE 8500 firware to BUKD1 it upgraded the first try itself, everything works fine... now there's another firmware available for BU region, it is the BUKE1, I tried finding the files using multi loader but there are 2 files missing namely the BOOT and the Factory FS now should I go ahead with the flash even with these two files missing???
Got a little scared once i'd flashed my Wave II back to JL2 to allow Wavespoofer to work because I was getting a message saying "No SIM Found" however it was just me being silly and putting it in the wrong way :D
Thanks a lot, works a charm and having a walk through gave me piece of mind compared to a written tutorial :)
if i flash my phone can i still phone and write sms and 3g and all that stuff or no? and what exactly does a flash make so helpful for my samsung wave?
At the end of loading all files are OK but on the phone's display apeears that "NO FOTA ENGINE IS INSTALLED, PLEASE INSTALL FOTA ENGINE" so I have to reflash , maybe add FOTA there in the Downloader. Maybe is because I use diferent firmware country than before, I wait and see..... Ok after cecking FOTA and partial download works great!!
hey i want to ask if there is a method to backup the original firmware first so... is there an option to make a full backup of all settings and themes and so on ? or what does the flash change? is it maybe only an "update" to an older original version without change?
THANK YOU! i've been waiting so long for an official update! since i found out about 1.2(oct 11) and decided to do it there and it worked the first time and all! I even had a network lock on and it works! :D :D :D
This video was very helpful. :) Although i had to flash my wave about 10+ time, but in the end it went perfect. I think that amount of flashing had something to do with my pc and not the guide. Never the less, my wave is back on track and working perfectly. Thats all that matters to me. :) Thanks a million HMundane. Keep up the good work. :)
I sorted out the issue.I forgot to put the FOTA file and that's why I had the error message.So before flashing check if you put all the necessary files in multiloader especially FOTA as it is the last one and you might forget to add it. .After adding BADA 1.2 the phone is faster .
I just flashed my wave three times and every time it restarts when it goes in main screen (so its turning on and off non stop) :(... its like failing to load a widget and reboots... does anyone have any suggestions ?
You have to downgrade/upgrade to a firmware that includes boot files. If you get a problem with a firmware, just try an another one, i flashed my phone 4 times with different firmware and my phone is faster and batter then ever, worth the hard work and a nearly heart attack
@iraqirafel thank god i fixed it ... i just used another firmware and it worked but in the end i couldn't get the one i want... nevermind, i escaped that heart attack at least :)
i am using mac and i am using virtual windows with parallel desktops program...i heard you mentioning that it's not safe flashing by a virtual windows os...did i get it right??
@HMundane have you heard that specific problems will occur?or that it's not safe generally?i mean if you know someone that done it and told you not to try it then i wont give it a chance...otherwise,i should give it a try...thnx for your last answer...and sorry for being so persisting...
@Traxx011 It allows you to play videos and games which is a requirement for most websites unfortunately. Not having flash is like not having proper use of the internet like you can on your home pc.
Thanks to the video uploader. I just bought my phone few hours ago and surprisingly, the phone rebooted everytime I make call, receive call or send text and no internet using wifi. Was really pissed off for some time. After installing this update, I can make calls and browse the internet. Many thanks.
hi, I have a problem. My phone was unlocked and now I have middle east fw (jpjg2_kor). I doesn't bother me but I can't use samsung apps and any other app that I download from Kies (I tried install it as I'm from middle east and as I'm from Croatia which I am). So naturally I think only flashing will solve my problem but I can't upgrade via Kies. How can I solve my problem with apps? I'm afraid when 1.2 version comes out I couldn't upgrade either. Should I try manual flash with european fw?
I used store till now but applications didn't start when I install them (screen would come short and then back to main menu or unsupported file type when I copied them to phone). Will this different country code also mean that I could update firmware trough Kies? Arab fw I presume? And switching to european fw is only possible trough flashing?
@samtron1950 This app problem happens with some apps (but not lots obviously). You can only change your fw by flashing. If you live in Europe then I suggest XXJID. Again, best thing to do is check some of the threads on forum - lots of info which can't be written in this small box!
@HMundane I'm cheking lots of forums but I can't manage to find right solution. I'll probably try to change product codes and see what will happen. If that doesn't help I'll wait for official fw 1.2 and leave flashing for the end. Thank you for your help
i followed all your instructions and the installation went great. The firmware is working great. But im having troubles connecting my wave to my computer either by using bluetooth or usb cable. My phone can be detected but unable to transfer any files .. can you please give me some advice?
and thanks fro your video. i did the same as in this video and now i have bada 1.2 its really nice. only thing i miss, i live in finland (language finnish) and now when i flashed the wave, cant find the finnish language anymore. can you please help me how to get it? or how to install it?
@CapoeiraWafy Go to one of the samfirmware sites, see if they have csc file with your language, you can flash separately. Or ask in forum for that file if it's not already posted.
Cheers HMundane, I cant thank you enough for this great flashing guide! Apart from the fact that you dont / cant give links for file sources, its perfect and did the trick for me and my Samsung Wave. Got bada 1.2 on it now, xxjd or what it was, the swype thingie for composing messages is unbeatable. Had zero problems following your guide, eventhough i didnt bother with mobile phones for quite some years. Thanks again. Now where can i find a decent lookin clock for my homescreen, but the dual one
Hello, I have a question ,my samsung wave is on SFR France firmware. I want to go back to Samsung's own firmware(my phone is not sim locked) is possible?if yes how I can do? .Thanks in advance,
Hello, I have a question ,my samsung wave is on SFR France firmware. I want to go back to Samsung's own firmware(my phone is not sim locked) is possible?if yes how I can do? .Thanks in advance,
@danylara27 You want to replace the operator branded fw, right? If there are no locks then you can flash the XXJID which is European fw and will have French settings and language.
I am really confused... what is the difference between selecting the "boot change" option or not?? some website say that you have to do it and some say to not do it EVER. please help!
@cblancoandujar It flashes the whole bootloader of your phone. If it goes wrong, your phone is dead. I don't think it is necessary, i explain in the vid. You must do your research and decide the best way.
@HMundane I did the flashing and it seemed to worked just fine but the widgets on the main screen keep on disapearing, is that normal? shall I flash it again?
plz help...cn i take cntcs and all stuff on micro sd bcoz i ll lose them after flashing or will kies detect ma phone after going to 1.2 so i cn back up
plz help...cn i take cntcs and all stuff on micro sd bcoz i ll lose them after flashing or will kies detect ma phone after going to 1.2 so i cn back up
@Dario13dexy Supposedly, it will damage your phone. If you want to remove the network lock, do a search. Plenty of services offered or you may find an unlock code free.
how do you make a back up from all the apps you downloaded? because I've downloaded apps that first were for free like rf2010 and furry legends but now are for a few euros, but I don't to pay that.
If you installed the apps through Kies, they will all be on your hard drive (My Documents > Samsung > Kies > Download > Applications) and you can reinstall them. If you downloaded direct from app store, they are available through the app store menu (downloads) and you should be able to reinstall again without paying. (You should test this first to be sure)
i got a error and it says ERR:Rsrc1 Erase what should i do?
alexandrumihai08 4 days ago
Everytime I trying to download an app, I get an bug error. Is it a common problem and currently no fix? Need help
Mrfisteration 5 days ago
People FOTA also must be checked,
I have try without it and i have faild. When i put FOTA i make it ;)
MrOrthodox95 1 week ago
thank you very much....
ShawnMak86 1 week ago
can i use it on my samsung wave 2
abhishek00000able 3 weeks ago
@abhishek00000able +1
EvBarIsraeL 1 week ago
newest flash: /watch?v=cvzIzbOemd4&context=C3a835caADOEgsToPDskJWQKtTFY9oH30ow0lR6d8C
Waveplayer192 3 weeks ago
This has been flagged as spam show
I have very big problem!!!!I did all u said but nothing happened!!!
k1hooligans 4 weeks ago
I have very big problem!!!!I did all u said but nothing happened!!!
k1hooligans 4 weeks ago
I have a big problem my samsung wave s8500 doesnt turn up again after a bad flash i can only go to download mode please what should i do to have bada 1.0 again because the computer doesnt detect the phone pleeeasseeee HELP!!!
Harted9 1 month ago
how i can download a aplication in app store??? i have bada 2.0 help me!!
avioncelo 1 month ago
i canˇ"t download app in app store...help me
avioncelo 1 month ago
Thank you so much :) Very helpful video indeed
Shanzida 1 month ago
Where did you download your firmware?
a88616 1 month ago
Dude I need some help!
My bootloader broke(I didn't flash it or anything just put some music on and took it out, turned it off the next day and then my phone wouldn't load up)
It's stuck on the samsung screen and won't come off, can't even turn it off with out removing battery.
SOOO! I got told I have to flash it, the problem being is I have no Idea how to remove sim lock because I can't actually get in to the phone to put the unlock code in...
Is there anything I can do...
jazass730 1 month ago
i have flashed it to 1.2, without boot changed ticked, thnkas for the tut
imacar112 2 months ago
Comment removed
imacar112 2 months ago
Hey, I have a samsung wave s8500 and am upgrading to JL2 1.2 using multiloader.... i have s8500DTJF2 - 1.0 at the moment and wanting to dual boot android, but my boot loader is not the one of the ones in the list,,,, i was told i needed a XXJL2 boot loader....iv got the full firmware but am unsure of which file is the boot file, and i dont want to corrupt the boot :(
imacar112 2 months ago
Hi, HMundane
i just tried to flash , but i have a big problem
here it is:
i tried multiloader when he downloads the files to the phone the USB cable is unplugged when te screen said wait to reset so the firmware is'nt fully downloaded
now i don't have any firmware on my phone and when i looked at my screen it says Wait to reset when i start up it gives me a orange screen and when i put in download mode my pc says : cannot find the wave driver so i tried everything to find the driver but no
fotoshopcs4 2 months ago
great manual, but...
i had to download one more file „FOTA“ *.fota.
if not the first re boot of my wave 1 failed
ettingerp 2 months ago
best guide thaink you
mdjukic500 2 months ago
Hi. I am unable to put my phone. I have tried several times. My phone is Wave 723.
Bsamanta921 2 months ago
I just want to say that your video is top notch helped me alot, veryclear and concise instructional video thank you very much dear sir more power ^^
carloud 3 months ago
Absolutely Excellent Guide. Big thanks
3112fowler 3 months ago
So if i have a sim lock i can't flash? That's just bullshit. Any way around it?
bolebosdfghjkl 3 months ago
Thanks for the vid ;-)
yano213 3 months ago
This has been flagged as spam show
1. YES
2. NO
3.NO
MrJohnalex2009 3 months ago
Can i do this with macbook?? If how???
skeidaaja 3 months ago
hey pal i tried to flash my wave to 2 s8530xpkh2 it shows an error ' err:Dbl erase '
what to do man i really want my phone back plzzzzzzzzzzzzzzz
plzzzzzzzzzzzzzzzzzz
plzzzzzzzzzzzzz
plzzzzzzzzzzz
help me out
amankasnia 3 months ago
@amankasnia You need to use Downloader 5.65. Earlier versions will give you that error.
thatguyhex 3 months ago
Step nine, the most important step of the whole process.
bobreapable2616 3 months ago
real helpful video! thanks a lot, your voice is loud and clear ;)
cityhopper014 3 months ago
hello, thanks for the video, but i'm still afraid that my phone will be bricked..:((
carl515kevin 4 months ago
Simple and helpful tut.. thumbs up..
MohammedNaimatKhan 4 months ago
thank you so much man
i upgraded my s8500 to bada 2.0
all credit goes 2 u
Thanks again!!!!
jzee95 4 months ago
@HMundane i just upgraded my WAVE 8500 firware to BUKD1 it upgraded the first try itself, everything works fine... now there's another firmware available for BU region, it is the BUKE1, I tried finding the files using multi loader but there are 2 files missing namely the BOOT and the Factory FS now should I go ahead with the flash even with these two files missing???
samjack16 4 months ago
"Download Start Ch[0]
BootLoader 1703.9KB OK[0.6s]
ERR : Dbl Erase" When i started flushing my wave, plz help me guys!
MrGeojim 4 months ago
cant find bootfiles and other stuff , any ideas why ?
Rougenator 4 months ago
This guide worked for me.. very good.
rupakdey 4 months ago
cAN I FLASH IT WITH 2.0 ON MY SAMSUNG WAVE 723
raghav8teen 5 months ago
@raghav8teen wtf wave 723?
bada 2.0 does not run on 723
only 8500 and 8530
DucAtHome 4 months ago
works perfect for me on the WAVE II S8530 with (upgraded to bada 2.0.1)
chenvili 5 months ago
this guy talks too much, who gives a fuk what he has jus get to the point. But he did help me to get it flashed =]
mumores 5 months ago
Mr. Mundane. it was really wonderful. U really made my day... Thanks a lot.... :-)
arifhm1 5 months ago
This has been flagged as spam show
when i tried i got wait reset ... and then serial port error ... any clue wht went wrong ?
ach312 5 months ago
Comment removed
ach312 5 months ago
Good work!! Thankz
ynsbmg 5 months ago
Hello, I wanted to ask .. I can use the same system for flashing from 1.2 to 2.0? Thanks
AlexTheWolf89 5 months ago 7
so i've already put a firmware, but i want to change, but now when I hit the Port Search button nothing happens, what should I do?
desmon 6 months ago
can you tel us what languages contains this firmware...
rankolaco 6 months ago
very nice vid i made also a tut on how to flash bada 2 on your wave if you want go and check it out :D
Ionaras13 7 months ago
Good job man :D
fabianmeister1 7 months ago
This has been flagged as spam show
i have downloaded the firmware but i can't open it when i click on it it says that it is an invalid file please tell me what to do
nvdrh 7 months ago
Comment removed
nvdrh 7 months ago
Got a little scared once i'd flashed my Wave II back to JL2 to allow Wavespoofer to work because I was getting a message saying "No SIM Found" however it was just me being silly and putting it in the wrong way :D
Thanks a lot, works a charm and having a walk through gave me piece of mind compared to a written tutorial :)
IrSurlawII 7 months ago
clear instructions - a great help. Thanks. I'd would just comment that I also needed to download FOTA which you don't mention. Thanks again
Homoox 7 months ago
Nice Guide.. Thanks! I've finally manage to flashing my wave.. =D
Left4lifeable 7 months ago
This has been flagged as spam show
pls thumbs up if this worked to 100%
DucAtHome 7 months ago 5
Thank you so much, this was really helpful :)
hamodeh2006 7 months ago
i have flashed with this video my vodafone buk firmware succesfully to JID
Kriege203 8 months ago
if i flash my phone can i still phone and write sms and 3g and all that stuff or no? and what exactly does a flash make so helpful for my samsung wave?
mikeyzor2 8 months ago
i have just updated to the 1.2 but the phone has no signal can u help me ?
THEMRSAVAGE95 8 months ago
I like the part when I go away make myself a sandwich and read a magazine sitting in the toilet :D
braian3636 9 months ago 4
@braian3636 I like it when I eat my sandwich on the toilet =)
methadone100 3 weeks ago
At the end of loading all files are OK but on the phone's display apeears that "NO FOTA ENGINE IS INSTALLED, PLEASE INSTALL FOTA ENGINE" so I have to reflash , maybe add FOTA there in the Downloader. Maybe is because I use diferent firmware country than before, I wait and see..... Ok after cecking FOTA and partial download works great!!
curcanus 9 months ago
@curcanus where did u get FOTA file?download link..
khaphishan 9 months ago
plz help i have installed latest arabic version firmaware but samsung app icon not opening
bismantariq 9 months ago
works for wave 2 ??
xR3MiixHD 9 months ago
each time i connect my data cable it alwa ys reboot..and when ever i try to make call it switch of and on again...any ideal on what to do ?
koolightcool 9 months ago
hey i want to ask if there is a method to backup the original firmware first so... is there an option to make a full backup of all settings and themes and so on ? or what does the flash change? is it maybe only an "update" to an older original version without change?
Campa939 9 months ago
is your pc 32 bit or 64 bit?
lithinm1998 9 months ago
will updating firmware fully reset the wave? eg delete txts, files on phone etc?
slasher2010 10 months ago
@slasher2010 WOOOOOOWWWWW!!! you really didnt listen during that video did you. From 2:28 - 2:42 does that anwser your question.
xXNoScOpEzXx1 9 months ago
I'm sorry for this "noob" question but what can you do more if your Samsung Wave is flashed? Please answer this is important for me... Thanks
iGameyou 10 months ago
Thanks dude :D
singhmanish251 10 months ago
Thank you do you know how to do this for the Samsung Behold?
LTF85199 10 months ago
by me come again
Download Start Ch[0]
BootLoader 1703.9KB OK[0.9s]
ERR : Dbl Erase
and again and again whats the problem??
danny304050 10 months ago
I'm unable to flash My JK3 firmware :(
TheR00Z 10 months ago
thank u! i did flash it on a windows 7 64 bit...and it flashed without a hitch.....ne wayz once again thnx!
30fabin 11 months ago
harvey mundane is the man!! pls post flashing 2.0 when the beta version gets released...thx
branislavic1 11 months ago
dude i cant open my KIEs.....???
why??
sainibboyz 11 months ago
THANK YOU! i've been waiting so long for an official update! since i found out about 1.2(oct 11) and decided to do it there and it worked the first time and all! I even had a network lock on and it works! :D :D :D
neongastube 11 months ago
I cannot thank you enough :) most help a youtube video has ever been - all features working as i had hoped! Cheers!
ajayrajit 11 months ago
I have unlocked Orange(France) Wave. OS version is bada 1.0 (S8500BVJK1). Samsung Kies says no firmware update us available for my region(Asia).
Questions are:
1. If I upgrade it to 1.2 flashing with S8500XXJL2 will it still remain unlocked?
2. Will IMEI be changed after the flash?
3. Will it still be recognizable to Kies 2 after flashing?
sergelenhuu 11 months ago 5
Why would I want to flash my phone?
TheKala321 11 months ago
my network lock is on
can you help me?
OMGGP 1 year ago
does this work on wave 533 for mexico????
dvf5 1 year ago
This video was very helpful. :) Although i had to flash my wave about 10+ time, but in the end it went perfect. I think that amount of flashing had something to do with my pc and not the guide. Never the less, my wave is back on track and working perfectly. Thats all that matters to me. :) Thanks a million HMundane. Keep up the good work. :)
FHNROLLAN 1 year ago
I sorted out the issue.I forgot to put the FOTA file and that's why I had the error message.So before flashing check if you put all the necessary files in multiloader especially FOTA as it is the last one and you might forget to add it. .After adding BADA 1.2 the phone is faster .
Avrelianvs1870123 1 year ago
what does flashing do to the phone? i have version 1.0 and i tried upgrading the firmware on kies but it never works.
Kdvazz 1 year ago
Comment removed
Avrelianvs1870123 1 year ago
Hi,
I followed the tutorial ,all was OK but at the end I received error:FOTA Engine not installed .What should I do?
Thanks in advance for feedback
Avrelianvs1870123 1 year ago
my current version is s8500ddjf2_inu
Mr99Akhil 1 year ago
i m from asia and want to flash my phone with european 1.2 version ......... so how can i get boot file and factory files
Mr99Akhil 1 year ago
I just flashed my wave three times and every time it restarts when it goes in main screen (so its turning on and off non stop) :(... its like failing to load a widget and reboots... does anyone have any suggestions ?
BillyViBritannia 1 year ago 2
@BillyViBritannia Please go to a forum like mysamsungwave - there are many threads on similar problems.
HMundane 1 year ago
@BillyViBritannia
You have to downgrade/upgrade to a firmware that includes boot files. If you get a problem with a firmware, just try an another one, i flashed my phone 4 times with different firmware and my phone is faster and batter then ever, worth the hard work and a nearly heart attack
iraqirafel 1 year ago
@iraqirafel thank god i fixed it ... i just used another firmware and it worked but in the end i couldn't get the one i want... nevermind, i escaped that heart attack at least :)
BillyViBritannia 1 year ago
and thanks for the guide HMundane, it was really helpful...
BillyViBritannia 1 year ago
@BillyViBritannia Try a different ROM and check for all the files to be in place.
Avrelianvs1870123 1 year ago
i am using mac and i am using virtual windows with parallel desktops program...i heard you mentioning that it's not safe flashing by a virtual windows os...did i get it right??
alexthemalakas 1 year ago
@alexthemalakas I have no experience of that set-up, but have heard that it is not safe to use a virtual machine.
HMundane 1 year ago 2
@HMundane have you heard that specific problems will occur?or that it's not safe generally?i mean if you know someone that done it and told you not to try it then i wont give it a chance...otherwise,i should give it a try...thnx for your last answer...and sorry for being so persisting...
alexthemalakas 1 year ago
@alexthemalakas Nothing specific, no. Let us know what happens.
HMundane 1 year ago
why i need flashing ? for what people flash samsung wave s8500???
playboy436 1 year ago
Thank you so much for making it this easy! :D
desktopfusion 1 year ago
where do i download the 1.2 ?
THEMRSAVAGE95 1 year ago
Is it safe to downgrade on Samsung Wave? If we have a full fw with bootloader ofc. Thanks in advance :)
RockeerSu 1 year ago
@RockeerSu Yes, you can.
HMundane 1 year ago
Full respect for the video! but where did you get the firmware file from? Cheers, Si
simon44 1 year ago
Puts a newer (better) version of the operating system on your phone.
HMundane 1 year ago
what are the benefits of flashing your phone? what does it do?
Traxx011 1 year ago
@Traxx011 It allows you to play videos and games which is a requirement for most websites unfortunately. Not having flash is like not having proper use of the internet like you can on your home pc.
simon44 1 year ago
@Traxx011 if a update fucked up you can flash or if you want ANDROID on it
TheMrDavidKing 1 year ago
Thanks to the video uploader. I just bought my phone few hours ago and surprisingly, the phone rebooted everytime I make call, receive call or send text and no internet using wifi. Was really pissed off for some time. After installing this update, I can make calls and browse the internet. Many thanks.
saqibrazzaq 1 year ago
Muchas Gracias. Muy buena guia. Saludos
ivfaris 1 year ago
where can i download the latest firmware?
leokrishmar 1 year ago
I don't consider they add much - a few keyboard enhancements - for full info check out the forum threads.
HMundane 1 year ago
hi, I have a problem. My phone was unlocked and now I have middle east fw (jpjg2_kor). I doesn't bother me but I can't use samsung apps and any other app that I download from Kies (I tried install it as I'm from middle east and as I'm from Croatia which I am). So naturally I think only flashing will solve my problem but I can't upgrade via Kies. How can I solve my problem with apps? I'm afraid when 1.2 version comes out I couldn't upgrade either. Should I try manual flash with european fw?
samtron1950 1 year ago
@samtron1950 I think this can be fixed in Kies rather than flashing new fw. Look in the forums for how to change the product code in Kies.
HMundane 1 year ago
thanks, I'll try to find it. Will then my wave update to arab or european version?
samtron1950 1 year ago
@samtron1950 Your phone will not change, but Kies will think it has different country code so you will be able to use the app store.
HMundane 1 year ago
I used store till now but applications didn't start when I install them (screen would come short and then back to main menu or unsupported file type when I copied them to phone). Will this different country code also mean that I could update firmware trough Kies? Arab fw I presume? And switching to european fw is only possible trough flashing?
samtron1950 1 year ago
@samtron1950 This app problem happens with some apps (but not lots obviously). You can only change your fw by flashing. If you live in Europe then I suggest XXJID. Again, best thing to do is check some of the threads on forum - lots of info which can't be written in this small box!
HMundane 1 year ago
@HMundane I'm cheking lots of forums but I can't manage to find right solution. I'll probably try to change product codes and see what will happen. If that doesn't help I'll wait for official fw 1.2 and leave flashing for the end. Thank you for your help
samtron1950 1 year ago
@HMundane I tried every possible code change that I found on forum and I didn't have any luck. I think I'm gonna flash.
Is it big problem if I flash european fw over middle east one?
I think I'm gonna flash official 1.02 version and than wait for official 1.2 trough Kies. Can you reccomend any? xxjid is 1.2 I think
samtron1950 1 year ago
@samtron1950 Yeah, you might have some small problems. XXJID is the only full 1.2, so i would flash that.
HMundane 1 year ago
Comment removed
gossipze 1 year ago
hi,
i followed all your instructions and the installation went great. The firmware is working great. But im having troubles connecting my wave to my computer either by using bluetooth or usb cable. My phone can be detected but unable to transfer any files .. can you please give me some advice?
Ken
gossipze 1 year ago
Comment removed
gossipze 1 year ago
Comment removed
gossipze 1 year ago
@gossipze found the solution in one of the bada forums. just go to the top left of kies and select 'driver discovery'. thanx and great video Harvey.
Have you any idea what are the addons to this firmware like xxjk1 and xejl2 are about?
gossipze 1 year ago
thnx broo. . .u are the BEST!!! :)))
1988luckyluciano 1 year ago
hi,
and thanks fro your video. i did the same as in this video and now i have bada 1.2 its really nice. only thing i miss, i live in finland (language finnish) and now when i flashed the wave, cant find the finnish language anymore. can you please help me how to get it? or how to install it?
thanks in advance.
CapoeiraWafy 1 year ago
@CapoeiraWafy Go to one of the samfirmware sites, see if they have csc file with your language, you can flash separately. Or ask in forum for that file if it's not already posted.
HMundane 1 year ago
Thank you very much <3
SozPurefect 1 year ago
This has been flagged as spam show
You can download bada 1.2 firmware and many other apps from my blog
badawaveapps.blogspot.com
0161shashank 1 year ago
Cheers HMundane, I cant thank you enough for this great flashing guide! Apart from the fact that you dont / cant give links for file sources, its perfect and did the trick for me and my Samsung Wave. Got bada 1.2 on it now, xxjd or what it was, the swype thingie for composing messages is unbeatable. Had zero problems following your guide, eventhough i didnt bother with mobile phones for quite some years. Thanks again. Now where can i find a decent lookin clock for my homescreen, but the dual one
wmsbk2k 1 year ago
Sorry i can't give any links or names. Ten minutes doing a search for 'multiloader', 'bada' etc will get you all you need to know.
HMundane 1 year ago
Can you please tell where can I download the relevant (region, language etc.) firmware and other needed software from?
himynameisks 1 year ago
it helped me great! excellent steps, clear and a good timing. thank you!
djrickez 1 year ago
This has been flagged as spam show
Hello, I have a question ,my samsung wave is on SFR France firmware. I want to go back to Samsung's own firmware(my phone is not sim locked) is possible?if yes how I can do? .Thanks in advance,
danylara27 1 year ago
Hello, I have a question ,my samsung wave is on SFR France firmware. I want to go back to Samsung's own firmware(my phone is not sim locked) is possible?if yes how I can do? .Thanks in advance,
danylara27 1 year ago
@danylara27 You want to replace the operator branded fw, right? If there are no locks then you can flash the XXJID which is European fw and will have French settings and language.
HMundane 1 year ago
@HMundane, thx a lot i will tray
danylara27 1 year ago
thx a lot but i have question, i have windows 7 x64 bit can i flash my phone safely with it?
gonnalost17 1 year ago
@gonnalost17 One person told me they had done it successfully on x64, that's all i know.
HMundane 1 year ago
Comment removed
gonnalost17 1 year ago
Comment removed
cblancoandujar 1 year ago
thanks a lot!!!! also, do you know if kies will recorgnise my phone after I change the firmware?? (thanks so much for your help!)
cblancoandujar 1 year ago
@cblancoandujar yes, it will. You may have to reinstall drivers but that's all.
HMundane 1 year ago
I am really confused... what is the difference between selecting the "boot change" option or not?? some website say that you have to do it and some say to not do it EVER. please help!
cblancoandujar 1 year ago
@cblancoandujar It flashes the whole bootloader of your phone. If it goes wrong, your phone is dead. I don't think it is necessary, i explain in the vid. You must do your research and decide the best way.
HMundane 1 year ago
@HMundane I did the flashing and it seemed to worked just fine but the widgets on the main screen keep on disapearing, is that normal? shall I flash it again?
cblancoandujar 1 year ago
@hmundane---thanks dude ..u r the man...but where s the option of taking cntcts on memory card...i m nt able to find it
jenilgurnaani 1 year ago
@jenilgurnaani sry, i meant sim card - you prob already knew that. Just back up with Kies, though it won't reinstall your contact pics.
HMundane 1 year ago
This has been flagged as spam show
plz help...cn i take cntcs and all stuff on micro sd bcoz i ll lose them after flashing or will kies detect ma phone after going to 1.2 so i cn back up
jenilgurnaani 1 year ago
plz help...cn i take cntcs and all stuff on micro sd bcoz i ll lose them after flashing or will kies detect ma phone after going to 1.2 so i cn back up
jenilgurnaani 1 year ago
@jenilgurnaani you can do either, but saving contacts to sd card will lose some info.
HMundane 1 year ago
dude thanks...one q cn i back up my cntcts and notes on micro card??will kies detect it ...or any way to get it plz help
jenilgurnaani 1 year ago
hehe :D thnx for the information :P
Dario13dexy 1 year ago
tnx...but (sry for being iritating...im curious) what sort of damage?
Dario13dexy 1 year ago
@Dario13dexy The screen will flash the colours of the rainbow, and will hum the theme tune to the A-Team at full volume :)
HMundane 1 year ago
so is there any bigger deal than just loosing conctract? cuz rly i dont give a damn xD
and also...what will happen if i flash it with network lock ON?
Dario13dexy 1 year ago
@Dario13dexy Supposedly, it will damage your phone. If you want to remove the network lock, do a search. Plenty of services offered or you may find an unlock code free.
HMundane 1 year ago
i only have network lock ON..how to turn it off? tnx :D
Dario13dexy 1 year ago
@Dario13dexy Not recommended if you intend to keep your operator contract :)
HMundane 1 year ago
cheers :) it really helped me a lot
whoopsxx 1 year ago
thank you!
306095sgtwickel 1 year ago
how do you make a back up from all the apps you downloaded? because I've downloaded apps that first were for free like rf2010 and furry legends but now are for a few euros, but I don't to pay that.
thank you in advance.
btw; good tutorial
antoineborne 1 year ago
@antoineborne
If you installed the apps through Kies, they will all be on your hard drive (My Documents > Samsung > Kies > Download > Applications) and you can reinstall them. If you downloaded direct from app store, they are available through the app store menu (downloads) and you should be able to reinstall again without paying. (You should test this first to be sure)
HMundane 1 year ago