didn't think you could pop the ball joint by banging it on the side like that. Doing this on my car tomorrow and was going to do the whole ball joint remover and pray I didn't mess the boot up. Going to go with this bang it and hang it technique.
great video dude, Im having the problem of my passenger side axle refusing to go back into transmission. There is a 1/4th inch gap where axle connects into transmission. Resulting the car to now go anywhere. Any input would be helpful man
@hermetkrab With a 1/4" gap, It sounds like you did not seat the Axle all the way, you need to push it hella hard, almost slam it into place to seat the ring on the end. If you have done that it is most likely the wrong axle.
i have pushed them in but i think they might just be to short you see i have a 1.7 tranny and a 1.8 engine but they just pop out from the boot so im just thinking they are just to short
@MrDOHCDA9 Just make sure you push the axle in hard enough to make the clip on the tranny side of the axle pop back in the trans. I have snapped 3 axles in half and I've gone through about 8 pairs in the past 4 years, There just weak axles.
you do not have to mess with the axle nut, just take it off and it will naturally straighten back out...
BTW:
i love Ryobi impacts... i own two including the new 200 foot pound version...
4doorlife 1 month ago
very helpfull thank-you
j16out 1 month ago
nice video! thanks for helpin a sista out:)
Tanita12 2 months ago
thankz bro really helpd me
javier01136 2 months ago
Nice video bro
00000000000000o0 2 months ago
you changed that axle before the video..no wonder things went so smoothly lol
Jx1x3 2 months ago
didn't think you could pop the ball joint by banging it on the side like that. Doing this on my car tomorrow and was going to do the whole ball joint remover and pray I didn't mess the boot up. Going to go with this bang it and hang it technique.
omga14 3 months ago
good stuff bro
li8626 3 months ago
really good video. but seem like that bodykit u have isnt jdm
integratechnician 5 months ago
great video dude, Im having the problem of my passenger side axle refusing to go back into transmission. There is a 1/4th inch gap where axle connects into transmission. Resulting the car to now go anywhere. Any input would be helpful man
hermetkrab 7 months ago
@hermetkrab With a 1/4" gap, It sounds like you did not seat the Axle all the way, you need to push it hella hard, almost slam it into place to seat the ring on the end. If you have done that it is most likely the wrong axle.
FastestIntegra 7 months ago
Your axle seemed new haha also...I have the name yellow screwdriverr
Jx1x3 7 months ago
Comment removed
aerickgomez 7 months ago
thx alot man really saved me some money,,
tino8080 8 months ago
ok thanks man
miguelchavez2010 8 months ago
i cant loosen up my bolt i broke like 3 ratchets. what do you suggest?
thanks??
miguelchavez2010 8 months ago
@miguelchavez2010 You need to use a Braker bar.
FastestIntegra 8 months ago
awesome! doing it soon. great instruction.
bishopw1 8 months ago
@tyxium it could be your axle boots it could be loose or it exploded
TaLoCc 9 months ago
@TaLoCc
they look exploded..ill change them and see the difference.
but thanks a lot man i appreciate it.
tyxium 9 months ago
you dont have to take the fork out, the axel slips thru the fork
stephintegra88 11 months ago
Thank you for posting excellent video
rj00130 1 year ago
@rj00130 Subscibe for more.
FastestIntegra 1 year ago
i have pushed them in but i think they might just be to short you see i have a 1.7 tranny and a 1.8 engine but they just pop out from the boot so im just thinking they are just to short
MrDOHCDA9 1 year ago
so how do u install it because everytime i put mine back in my car just snaps it
MrDOHCDA9 1 year ago
@MrDOHCDA9 Just make sure you push the axle in hard enough to make the clip on the tranny side of the axle pop back in the trans. I have snapped 3 axles in half and I've gone through about 8 pairs in the past 4 years, There just weak axles.
FastestIntegra 1 year ago