get of the training gear and it will fly perfect i had the saqme problem, the balls on the end of the training gear catching the wind of the rotorblades en start vibrating, just get those balls of the gear.
Forse hai l'albero storto,oppure controlla la distanza dei paddle dalla testa!(deve essere uguale),,,Controlla la corona e se il motore è ben avvitato..Secondo me è l'albero storto.. ciao ;)
indipendentemente dalle vibrazioni.. la lipo va messa sotto la ricevente 4 in 1 per dargli piu stabilità.. io ho preso hbfp da 2 settimane e il primo volo disatroso.. dopo lo spostamento batteria va decisamente meglio
If you have a vibration, try loosening your blades. Also while your heli is off look at the heli from the side, and gently push the swashplate down at the front, and make sure the flight paddles are at the same angle
Do you mean the tail boom. If this is the case i had the same problem it was lose and made the tail twist. If this is happening just get some super glue and glue it and it should be fine. Hope this has helped. These helis can be frustrating.
throw a pizza in the air
callofduty1944 10 months ago
get of the training gear and it will fly perfect i had the saqme problem, the balls on the end of the training gear catching the wind of the rotorblades en start vibrating, just get those balls of the gear.
sredneok 1 year ago
why you dont fly anymore!? aww man
heberorozco 1 year ago
@heberorozco
Because i havent passion anymore...
sabota23 1 year ago
just twist the blades
jauchiu 2 years ago
It is the flybar, adjust the 2 end paddles to be flat and make sure they are all the way on the rod.
fostercd1 2 years ago
Forse hai l'albero storto,oppure controlla la distanza dei paddle dalla testa!(deve essere uguale),,,Controlla la corona e se il motore è ben avvitato..Secondo me è l'albero storto.. ciao ;)
Tiber1979 2 years ago
Lascia stare guarda...smontare l'a;bero principale di un Fp e' praticamente impossibile...ho buttato un modello per farlo (si e' distrutto tutto...)
sabota23 2 years ago
indipendentemente dalle vibrazioni.. la lipo va messa sotto la ricevente 4 in 1 per dargli piu stabilità.. io ho preso hbfp da 2 settimane e il primo volo disatroso.. dopo lo spostamento batteria va decisamente meglio
mar72kuss 2 years ago
In passato la tenevo sul davanti...ma tentar non uove e riprovero' a metterla sul davanti... grazie del del consiglio!
sabota23 2 years ago
If you have a vibration, try loosening your blades. Also while your heli is off look at the heli from the side, and gently push the swashplate down at the front, and make sure the flight paddles are at the same angle
cloudcity09 2 years ago
I check it...i think the problem is main shaft but unfortunately the screw to control is "broken" and i dont know how i can check it :(
sabota23 2 years ago
Do you mean the tail boom. If this is the case i had the same problem it was lose and made the tail twist. If this is happening just get some super glue and glue it and it should be fine. Hope this has helped. These helis can be frustrating.
cloudcity09 2 years ago
@sabota23 It's your blades that need to be balanced with more weight (some tape will do the trick).
Check out the 'PROPER Honey Bee CP2 SETUP & HOW to fly it.' video, around 04:47.
PHeMoX 1 year ago
ty for help but i dont fly anymore...
sabota23 1 year ago