Kinda fugly . I like it. I made one very similar to this 40 years ago.(A bit more pretty) Mine had no rifling so from 50 ft. it could miss the target by 6ft!!!. I found one of the fired bullets and it actually went in backwards. End over end tumbling.
The barrel is smooth bore. I don't have a good idea of what the accuracy is like because I have only used it to shoot at targets which are not very far away.
so i have a rimfire .22 derringer passed down in my family since as long as we can remember. i've been thinking about making one as well. would you suggest making one like this or keeping with the old 22
@snowboardersrule For recreational shooting, I would advise you stick with the old one unless you know what you are doing. It all depends what you are interested in though; I continued to construct various types of guns even after I had several commercially manufactured firearms that work much better than anything I could build. If you make one without calculating strengths, or improperly manufacture it, it can be very dangerous.
the manufacture of firearms in the us is illegal with out a level 2 ffl liscence and is enforced by the ATF making it a FEDERAL crime to do so (trust me I've done my homework on firearms laws boh here in canada and in the states)
@hikkfromhell No, you do not need to register it, american citizen without felonies are allowed to manufacture their own arms as long as they are not sold, traded, or given away. and as long as the firearm in question does not violate any current laws on any level.
@hikkfromhell well if he is 18 it doesnt matter cause if his state doesnt require registration and he is 18 then he is of legal age to possess a handgun so it doesnt matter if it is homeade or not.
dude you need to weld ur spring in... or at least make a latch on the frame that will keep it in until u are ready to field strip it, and cool gun man!
post the steps on how to make this thing.... I WANT ONE ...and u dumb mother fuckers below quit bitching about the federal laws... no one gives a fuck about what u pussies think
Damn good job! And don't let these idiots tell you that it's illegal when it's not. You do not need a damn license or anything to build your own firearm, just stay within federal guidelines (no auto, SBR, SBS, ect.) and you'll be fine.
Wrong. He can build it, but not own it, or sale it, unless he has the proper licenses. So technically, w/o those licenses to own/sale a gun, he cannot legally built one.
What he needed to do is get the proper license before building it, so once its built, he can get it serialized and registered.
As he is now, if he lives in the states he is fucked. If he lives in Canada, he is fucked.
No, he can build a firearm, own it, and sell it without any licenses. If he's going to sell it he must serialize it and register it on a Form 1. The ATF states that if you build your own firearms for PROFIT only then you need an FFL. Saying if he's in Canada is moot since he's not, he's in the US so he has the right to produce his own firearms.
I have been making my own AK-47's and AK-74's for a few years now. All of them on MY OWN receivers that I MADE, and I'm perfectly within the law.
Are you an American citizen? If so then yes. I've built two AR-15 (one pistol, one rifle) from 80% forgings that I machined to 100% receivers and made firearms out of them with no registration, serial number, ect. I decided that I didn't like the pistol AR so much so I filled a Form 1 with the ATF, engraved a serial number on it, and sold it. Perfectly legal.
If you build a rifle and want to give it to family then you don't even have to put a serial number on it so long as they don't sell it.
Also, I just realized that you said New York. Since AR's are illegal in New York according to STATE law you cannot legally build one. Even though there are no FEDERAL laws prohibiting you there are STATE laws prohibiting you.
So if you live in a state like Missouri, you can legally build yourself an AR, AK, or even an M2 .50 BMG. So long as you're within state and federal law.
No, you are wrong. US law permits one to build 1 firearm per year as long as it complies with all federal and local laws; which this does. The gun cannot be built explicitly for sale but can be sold, there is no need to "register" a home built gun. So why don't you check the laws before you post, DUMBASS
There are federal laws. You cannot own anti-tank rifles. You cannot own bullets with depleted uranium in them. You cannot buy a gun that uses explosive rounds. You cannot own autocannons. Those are federal laws for guns.
where can i buy a gun (any type of it=that easy to use it and hard to broke.) at MALAYSIA? Or i can buy from u guys using credit card or banking. Just to keep it for my safety.
If Malaysia has gun stores I would recommend buying from Impact Guns. You will need to get advanced permission from your local gunstore. Buy the gun from impact guns then pay the transfer fee of your local gunstore. I do not know for sure though.
nope. in malaysia, its illegal to hav guns. If you need one u must hav licence and they will see wat job are you. It cannot be used as personal defense. dats y i wan to buy it illegally.
This gun is really well conceived, i would only make a new hammer with a sort of shield to deflect any airborne brass from a punctured case. Really you don't need much to hold the pressures of a 22... I also love how you solved the breech lock... A sistem used even on shotguns.
I just bought a 22 starter pistol and drilled it out.. Although I guess it's better to be able to build one out of old appliance pieces. If you had a bicycle and some gum could you build a bomb out of it?
Ok, you put a lot of work into that. But my question is why? I mean it is several steps above your average zip gun, with some decent engineering. But it is still just a single shot pistol. You can buy a real one for next to nothing.
I have bought old .22 LR revolvers for under $50. They ain't Rugers, but they still go bang, and are higher on the food chain than a zip gun. Or even his toy. As something to do just to say you have, I can see it. But I'll stick with store-bought for the time being. I'm not as talented as he is, and I like being able to count to 10 on my fingers...
why buy a gun if you have theskill and get pleasure from designing and building it yourself THAT IS WHY and lets be honest guns arent legal in all countries if you know what i mean, bit of a dumb question really!!
Hey, if anyone wants a step by step tutorial on how to build a pen gun that fires with matchhead gunpowder out of papier mache, then check out my channel:)
umum, nope, i must be a city slicker cuz, i just go to tha gun shop and but ammo from wal-mart. i dont trust no shit like that, and how fast can u reload that thing? seems pretty useless if somebody has a clip with two bullets.
Yeah, when I first started building it, I was going to put a cylinder (6 shot), but I couldn't drill it straight. I found out how to drill it straight, but since the shells jam in the back of the barrel after they're fired, I figured it wasn't worth it.
....and then there's the dummies want to 'ban' guns. Looks like they'll also need to ban metal, files, welders, machine shops and all the other tools used to work metal. In a world where guns are 'banned', talents such as this could make one rich.
i shot some real bullets by just takeing my bb gun and putting a bullet in the barral than pulling the trigger letting the bb hit the end of the bullet than it shot i kept doing this however my gun broke so now...
This is why gun control will NEVER EVER EVER WORK for you IDIOTS out ther that support that load of crap. A inmate at San Quintin State Prison made a gun there, that should say a lot.
actually its legal to make your own weapons as long as you dont sell them. and you can sell them as long as you stamp the receiver and register it with the BATF. idiot.
This comment has received too many negative votesshow
just one gunner you are just as fucking stupid as the guy who built. It is ilegal to manufacture a firearm without a BATFE approved Class 2 license. Look, if you want to seem cool and act like you know about guns you can fuck off right now. And seeing how it is home-made of course it is a piece of shit because the barrel has no rifling, dumb ass
Ok, mr. iluvsheldon, it is NOT illegal to manufacture firearms without a class 2 firearms license, you just can't sell them. Interestingly, according to the ATF, once you build a firearm (or rebeuild the reciever) you do NOT have to have it even registered with the state you live in unless indicated by state law, that is unless the ATF has changed its laws in the last few days.
hey, sorry about this guy's comment, but it was my old account. someone figured out my password. i'm a southern chick from north carolina who knows absolutely NOTHING about guns. one of my old friends thinks he's the shit when it comes to guns and he figured out my password and was using it to belittle people on youtube. i'm sorry but i can promise that it won't happen anymore since i deleted that account and made this new one. sorry he pissed y'all off.
iluvsheldon you're the fucking wanker who's trying to look cool. This "piece of shit" could kill you with or without rifling you tool. its extremely well done for home made. And why the fuck are you bitching about it being illegal you fucking faggot. Get your facts straight, better yet, kill yourself.
sorry this guy pissed u off. he stole my password for my 'iluvsheldon' account so i deleted that one and made a new one. i can tell u he's not a wetback...just some white new jersey dickhead ;-]
he's just bitching because he really IS a faggot. he use to date my best friend and she caught him doing VERY GAY things to himself one day....haha. sorry about his comment tho, he stole my password so i deleted that account and made a new one. sorry if he pissed u off.
id be afraid to shot that damn thing... dont underestimate the power of those litte .22 shells... i had an old jennings semi-auto .22 pistol and that fucker blew up in my hand and i was diging shrapnel out ouf my hand for about 2hr's... i never thought a .22 had that much power (at the release of the projecticle) ... well until afterwards.
cool! But i already have a .22 Browning buckmark (WHICH IS SO ACCURATE) why shoot a peice of shit? if ur gonna make something homemade make a cannon... not a peashooter LOL
For one thing, it's good experience. This particular firearm, too, is highly concealable -- not to mention that the pressures generated from .22LR are much more manageable and safer to build (especially for a first-timer) a gun around.
Because it's home-made doesn't make it a piece of shit.
Informative. I know that in the USA, an individual CAN make one firearm for personal use per year, so long as that firearm isn't a machine gun, a short barreled rifle or short barreled shotgun or is a pistol with a smooth bore (which this one might be). You don't need to be a licensed firearms manufacturer in order to make one for personal use.
A police officer friend showed me a similar gun that was made in prison by an inmate. If criminals can make them there, they can make them anywhere.
@5400joe Did it not occur to you that some people ENJOY making their own!? "u dick head"!
SKUMMASBAGGUS 3 months ago
FYI this is highly illegal. If the BATF sees this you will be on your way to jail and very large fines.
derweibhai 6 months ago
That is awsome have you shot it
MrCod1997 8 months ago
yeah im way to lazy to do all this shit. i gather shit round my house and kinda slap things together. i made a decent flare gun lol
ytm789 10 months ago
Kinda fugly . I like it. I made one very similar to this 40 years ago.(A bit more pretty) Mine had no rifling so from 50 ft. it could miss the target by 6ft!!!. I found one of the fired bullets and it actually went in backwards. End over end tumbling.
winterka100 10 months ago
it looks eazy,but im too lazy to make one :)
vetmax100 10 months ago
This looks like a liberator pistol.
CrocoDuck420 11 months ago
Pretty nice little pistol. Is the barrel rifled, or smooth bore? If the barrel is smooth bore then what is the accuracy like?
MrJmak223 1 year ago
@MrJmak223 Thanks
The barrel is smooth bore. I don't have a good idea of what the accuracy is like because I have only used it to shoot at targets which are not very far away.
Idontknow134 1 year ago
Any plans ?
muzzeliere 1 year ago
lol 22 dislikes
Wedwickboy 1 year ago
what part of the scooter is it? PLEASE REPLY
KennyD0gg 1 year ago
@KennyD0gg It was the pin that kept the scooter from folding.
It was just the small metal piece, the loop and the spring.
Idontknow134 1 year ago
could you post some plans of it. just make them on paint it... nuttin fancy
supernuetralhero 1 year ago
so i have a rimfire .22 derringer passed down in my family since as long as we can remember. i've been thinking about making one as well. would you suggest making one like this or keeping with the old 22
snowboardersrule 1 year ago
@snowboardersrule For recreational shooting, I would advise you stick with the old one unless you know what you are doing. It all depends what you are interested in though; I continued to construct various types of guns even after I had several commercially manufactured firearms that work much better than anything I could build. If you make one without calculating strengths, or improperly manufacture it, it can be very dangerous.
Idontknow134 1 year ago
show us your new gun u made
GUNS4EVR 1 year ago
Comment removed
GUNS4EVR 1 year ago
u luky ass all i got is a knife
HazmaTeam007 1 year ago
simply briliant 5 stars
TheShadoman123 1 year ago
well its no 1911, but still, pretty pro! better than i could make :P
did you make it because you wanted a 22 pistol and didnt have one, or as an mechanical exercise?
azbrc1984 1 year ago
@azbrc1984 Both, but after I built it, I got a .22 pistol
Idontknow134 1 year ago
Interesting. How do you come up with it? Do you have a Derringer as a model?
MrChaosHeadz 1 year ago
it wazz a typo retard and yo retarded azz gun
teehood2 1 year ago
@teehood2
Shut up, wannabe nigger.
Zvesda 1 year ago
@Zvesda shut lame you got dem lame ass games on yo profile
teehood2 1 year ago
its wazz a typo retard and yo retarded azz gun
teehood2 1 year ago
you better quit playin wit dat peace of shit befoe yo blow ya dick
teehood2 1 year ago
@teehood2 how dumb do you have to be to intentianaly spell that dat, i hate you
fishtankbank 1 year ago
the manufacture of firearms in the us is illegal with out a level 2 ffl liscence and is enforced by the ATF making it a FEDERAL crime to do so (trust me I've done my homework on firearms laws boh here in canada and in the states)
iamcondescending 1 year ago
freakin AWESOME!plz make a tutorial!
FeonixFlamess 1 year ago
sweeeeeeeeet :D
mrf0lky 1 year ago
beautifly done mate :)
johnym89 2 years ago
Smells like bacon 'round here.
Sergi762 2 years ago 8
someone wants to go to jail
hikkfromhell 2 years ago
dude its legal to bare firearms
hotaru1able 2 years ago
yes it is if its registerd with the government but i highly doubt this weapon is so he can got to the pen for quite a while if he got cought with it
hikkfromhell 2 years ago
@hikkfromhell No, you do not need to register it, american citizen without felonies are allowed to manufacture their own arms as long as they are not sold, traded, or given away. and as long as the firearm in question does not violate any current laws on any level.
th3boy75 2 years ago
@hikkfromhell well if he is 18 it doesnt matter cause if his state doesnt require registration and he is 18 then he is of legal age to possess a handgun so it doesnt matter if it is homeade or not.
Skyde67 1 year ago
if you can speak flamish like i do english u mai start talking dickhead
adriman1992 2 years ago
dude you need to weld ur spring in... or at least make a latch on the frame that will keep it in until u are ready to field strip it, and cool gun man!
ajbutch123 2 years ago
vnc if you cant build that by watching the vid your beyond hopeless
jmurdainc88 2 years ago
post the steps on how to make this thing.... I WANT ONE ...and u dumb mother fuckers below quit bitching about the federal laws... no one gives a fuck about what u pussies think
vncntchi 2 years ago
amen brother... amen if you are going to go to the trouble of building one of these... fuck the government
ajbutch123 2 years ago
if the cops catch you you'l go in jail mait :p
adriman1992 2 years ago
mate not mait, you stupid Belgian cunt.
lewisadrian 2 years ago
nice taths a advanced gun relly nice=) 5/5
bomanio1 2 years ago
Cool. I noticed you took the shape of a Derringer. is that what was intended or did you choose to? my father has a 40cal. derringer. Hurts like HELL!
ufosorufhoax13 2 years ago
I didn't try to pattern it after a derringer, I guess it just came out like that.
It does look a lot like one though.
Idontknow134 2 years ago
Also, did you mill these out or use scrap metal? either way, its awesome.
kuroganeki 2 years ago
Most of it is made out of metal that I had laying around.
Milling it would probably be a better way to build it though.
Idontknow134 2 years ago
In some states, like California, you can only build a gun if you have a gunsmith licence.
kuroganeki 2 years ago
California is screwed. I hope they fix the problem over there.
TheFirearmEnthusiast 2 years ago 4
Yeah, well if you so much as take a shit in California, you'll get arrested. Fuck the whole state.
zchris87v 2 years ago
What the man doesn't know won't hurt him.
zacthebold 2 years ago
i bet u were one nasty kid, when u were young ;) nice gun though!
egermanicus 2 years ago
SAFE
ponyman13 2 years ago
i would not want to be on your bad side if we were in jail
thefiresinside16 2 years ago
Why didn't you shoot the gun ???
uxxxenglandxxxu 2 years ago
nice vid!! ;))
klingus11 2 years ago
Damn good job! And don't let these idiots tell you that it's illegal when it's not. You do not need a damn license or anything to build your own firearm, just stay within federal guidelines (no auto, SBR, SBS, ect.) and you'll be fine.
AEnemaBay 2 years ago
Wrong. He can build it, but not own it, or sale it, unless he has the proper licenses. So technically, w/o those licenses to own/sale a gun, he cannot legally built one.
What he needed to do is get the proper license before building it, so once its built, he can get it serialized and registered.
As he is now, if he lives in the states he is fucked. If he lives in Canada, he is fucked.
shadowblack1987 2 years ago
No, he can build a firearm, own it, and sell it without any licenses. If he's going to sell it he must serialize it and register it on a Form 1. The ATF states that if you build your own firearms for PROFIT only then you need an FFL. Saying if he's in Canada is moot since he's not, he's in the US so he has the right to produce his own firearms.
I have been making my own AK-47's and AK-74's for a few years now. All of them on MY OWN receivers that I MADE, and I'm perfectly within the law.
AEnemaBay 2 years ago
So you are saying if i drop by my family in NY, i could purchase an AR built kit and built it myself w/o any license?
It didn't work 2 years ago, nor did building myself a CNC upper and lower.
Please advise.
shadowblack1987 2 years ago
Are you an American citizen? If so then yes. I've built two AR-15 (one pistol, one rifle) from 80% forgings that I machined to 100% receivers and made firearms out of them with no registration, serial number, ect. I decided that I didn't like the pistol AR so much so I filled a Form 1 with the ATF, engraved a serial number on it, and sold it. Perfectly legal.
If you build a rifle and want to give it to family then you don't even have to put a serial number on it so long as they don't sell it.
AEnemaBay 2 years ago
Also, I just realized that you said New York. Since AR's are illegal in New York according to STATE law you cannot legally build one. Even though there are no FEDERAL laws prohibiting you there are STATE laws prohibiting you.
So if you live in a state like Missouri, you can legally build yourself an AR, AK, or even an M2 .50 BMG. So long as you're within state and federal law.
AEnemaBay 2 years ago
So NY strikes again...
shadowblack1987 2 years ago
No, you are wrong. US law permits one to build 1 firearm per year as long as it complies with all federal and local laws; which this does. The gun cannot be built explicitly for sale but can be sold, there is no need to "register" a home built gun. So why don't you check the laws before you post, DUMBASS
dragginham 2 years ago 3
Ohh name calling, how old are you, 10?
Gun law isn't all federal, its up to each state legislator.
Try building a gun in NY and see how that goes for yah kiddo.
shadowblack1987 2 years ago
There are federal laws. You cannot own anti-tank rifles. You cannot own bullets with depleted uranium in them. You cannot buy a gun that uses explosive rounds. You cannot own autocannons. Those are federal laws for guns.
kuroganeki 2 years ago
Yupp their are also federal laws, but not ONLY federal laws which a lot of people seem to now know.
It's a combination which is why it defers state from state. Some people forget that.
shadowblack1987 2 years ago
Ohhhhhhh. I get what you were saying now. I thought you said that there were no federal gun bans.
kuroganeki 2 years ago
it shoot>
blackberrycurve666 2 years ago
Rage against the machine!!!
SpottyTheFish 2 years ago
wow, good work, dude
NIKSEEN 2 years ago 2
looks complicated
astronautman12 2 years ago
where can i buy a gun (any type of it=that easy to use it and hard to broke.) at MALAYSIA? Or i can buy from u guys using credit card or banking. Just to keep it for my safety.
keikeful92 2 years ago
If Malaysia has gun stores I would recommend buying from Impact Guns. You will need to get advanced permission from your local gunstore. Buy the gun from impact guns then pay the transfer fee of your local gunstore. I do not know for sure though.
my24939 2 years ago
nope. in malaysia, its illegal to hav guns. If you need one u must hav licence and they will see wat job are you. It cannot be used as personal defense. dats y i wan to buy it illegally.
keikeful92 2 years ago
Are you a class 2 manufacturer?
HiCapacity 2 years ago
hahah you can so take that on a plane! except the ammo would be hard..lol
Djnova11 2 years ago
metal detectors dumbass
gcdwg09 2 years ago
im thinking he said that because the whole pistol is made of steel....in other words sarcasm?
happymerc 2 years ago
fuck the cops
5mokedogg1 2 years ago
can zinc alloy hold 22lr pressure?
BAYAREA4150 2 years ago
Look up Hi-Point firearms. All of their pistols have zinc alloy barrels.
vladpiranha 2 years ago
I sell zinc items for a living. I would NEVER buy or make a weapon out of zinc. It's cheap and weak.
MassMIlitia 2 years ago
This gun is really well conceived, i would only make a new hammer with a sort of shield to deflect any airborne brass from a punctured case. Really you don't need much to hold the pressures of a 22... I also love how you solved the breech lock... A sistem used even on shotguns.
ibm5150 2 years ago
I just bought a 22 starter pistol and drilled it out.. Although I guess it's better to be able to build one out of old appliance pieces. If you had a bicycle and some gum could you build a bomb out of it?
ScottRMcpherson 2 years ago
Don't make one of these in Australia! you'll get screwed by the cops and it'll be all over the news!
azza1121 2 years ago 2
Shoot the fuckin thing
wonca 2 years ago 2
Bonnie & Clyde Prison Breakout pistol!
purpleravenstar 2 years ago 2
This could come in handy when martial law is declared...
Lazaro305201 2 years ago 11
how do i convert bb rifle and bb pistol into shot gun and pistol?
utopianvirtuoso 2 years ago
learn how to fucking gunsmith, stupid
ThEcAnAdIaNeMo 2 years ago
can i just say you cant, the metal on the bb gun will be a light grade metal and wont be suitable for shooting so jog on if you think you can convert
Graham454 2 years ago
Prison gun
CosmicDestroyer99 2 years ago 3
im not going to lie...that doesnt look very safe.
zachbdude 2 years ago 4
Great..nice job
din6046 2 years ago
thats great!
Because in countris like germany its very difficult to get a gun! I will made such a gun!
leifvier 2 years ago
you can it cost 600 euro black market
yahmmar 2 years ago
German person look up plans for a "Zip Gun".
ECTBWHO 2 years ago
it's REALLY easy buy some pipes, a saw, a spring
a nail and some wood message me if you wanna know more
ThEcAnAdIaNeMo 2 years ago
badass haha. nice job
pa1nt13aller 2 years ago
Comment removed
pa1nt13aller 2 years ago
They only cost under $100. You should buy a real set. I recommend Jennings(baby 9mm, .380, and a .22) and it's available on gunbroker(dot)com
MilitantBlak2009 3 years ago
Ok, you put a lot of work into that. But my question is why? I mean it is several steps above your average zip gun, with some decent engineering. But it is still just a single shot pistol. You can buy a real one for next to nothing.
bbbvvv312 3 years ago
the point of this isnt to have the best pistol its to hav a homemade one
plasm7 3 years ago
I call bullshit on you, buy a pistol for next to nothing- gimme a break.
They don't exactly come with your Happy Meal at McDonald's
IM1deadMONEY 2 years ago
I have bought old .22 LR revolvers for under $50. They ain't Rugers, but they still go bang, and are higher on the food chain than a zip gun. Or even his toy. As something to do just to say you have, I can see it. But I'll stick with store-bought for the time being. I'm not as talented as he is, and I like being able to count to 10 on my fingers...
bbbvvv312 2 years ago
This has been flagged as spam show
your no fun
anorexicused 2 years ago
you can on ur fingers, just count each finger twice. ;)
747pro 2 years ago
why buy a gun if you have theskill and get pleasure from designing and building it yourself THAT IS WHY and lets be honest guns arent legal in all countries if you know what i mean, bit of a dumb question really!!
ARCEYE78 2 years ago
This has been flagged as spam show
Hey, if anyone wants a step by step tutorial on how to build a pen gun that fires with matchhead gunpowder out of papier mache, then check out my channel:)
rimfa123 3 years ago 2
umum, nope, i must be a city slicker cuz, i just go to tha gun shop and but ammo from wal-mart. i dont trust no shit like that, and how fast can u reload that thing? seems pretty useless if somebody has a clip with two bullets.
SuddnBOI 3 years ago
can be fucI<,ing danger if you use the wrong metal , 1500 bar pressure from a 22lr in the barrel u mind your pistol make that a long time ?
a high pressure hydraulic pipe would be better for a barrel and your lock what hold the amo in the barrel looks pretty weakly ...
fluseONE 3 years ago
This has been flagged as spam show
I FOUND WORLD'S FASTEST RUGER 10/22 RIFLE ! ! ! Take look at my YouTube video.
TruthTeller878 3 years ago
zip gun
PatVRulz 3 years ago
umm? murder weapon? unregistered? lol
seems kinda fucked up to be makin a home made gun like that especially in .22 LR
and NO im not a gun control hippy fag. jesus christ i live in Texas.
AeonBlueApocalypse 3 years ago
u should add a revolver mechanism or a large barrel for 9mm or 45
Downwithcommunisim 3 years ago
Yeah, when I first started building it, I was going to put a cylinder (6 shot), but I couldn't drill it straight. I found out how to drill it straight, but since the shells jam in the back of the barrel after they're fired, I figured it wasn't worth it.
Idontknow134 3 years ago
what did u use for barrel?
bermudaterror 3 years ago
This comment has received too many negative votes show
thats retarded to make your own gun thats so dangeres
Monsterray42 3 years ago
omg mama's boy. and [sic] dangeres is spelled dangerous
XxToHellAndBackxX 3 years ago
hey bub i need instruction how to make this
Downwithcommunisim 3 years ago
....and then there's the dummies want to 'ban' guns. Looks like they'll also need to ban metal, files, welders, machine shops and all the other tools used to work metal. In a world where guns are 'banned', talents such as this could make one rich.
awizardalso 3 years ago 10
aaaaaaww someone who speaks sense at last you took the words straight from my mouth mmmm maybe i will be rich one day lol
ARCEYE78 2 years ago
suggestion: try to make the spring internal so you dont have to put the spring back into place after each shot.
psc29717 3 years ago
hey you fucking retard LR stands for long rifle you fuck stick get it right.
berad112 3 years ago
LR is the kind of cartridge that the gun takes. It does stand for long rifle, but can be a pistol cartridge as well.
Idontknow134 3 years ago
wat steel did u use for the barrel wat did u get it off ???
purpkush307 2 years ago
I used a steering shaft that came from a tractor. We had some scrap metal lying around from various places, and the size seemed about right.
Idontknow134 2 years ago
how accurate is this?
747pro 2 years ago
This is a clear example of an expedient gun, that is a gun to get a real gun with.
Good work.
chapiit08 3 years ago
hey suck my mother fucking CAWWRCK
TowandaPAboy12 3 years ago
Cawwrrrck
TowandaPAboy12 3 years ago
very well made, thats impressive. i made a .22 pen gun, nothing compared to this
tempestaisback 3 years ago
where did you get the parts at?
duemamay 3 years ago
nice
just a sugestion can you make a gun with a bigger round in it and can you make one with atleast two shots
ScoutVillena 3 years ago
i shot some real bullets by just takeing my bb gun and putting a bullet in the barral than pulling the trigger letting the bb hit the end of the bullet than it shot i kept doing this however my gun broke so now...
dddqueeny 3 years ago
done that too
Milkmadness 3 years ago
How did it break?
LazrBeam 3 years ago
This is why gun control will NEVER EVER EVER WORK for you IDIOTS out ther that support that load of crap. A inmate at San Quintin State Prison made a gun there, that should say a lot.
NsOakland6 3 years ago 5
This has been flagged as spam show
sweet. tell the chief of police i said hi when they bust you with out a firearms production grant! btw is it rifled?
pietroberetta93 3 years ago
actually its legal to make your own weapons as long as you dont sell them. and you can sell them as long as you stamp the receiver and register it with the BATF. idiot.
conveyorbelts 3 years ago 18
100% true.
tafino 3 years ago
hahahah that sucks, out here in tucson arizona, you can build and sell withought going thru the btaf WOOOT To the wild west!
DJRoach520 3 years ago
not exact made
SoullCatcherr 3 years ago
cool vid and above all nice fucking gun and who cares if its illegal
bleushift 3 years ago 8
true
elricdean 3 years ago
cool
tinmandlin 3 years ago
Totally illegal and ghetto as hell but looks like you put a lot of work into it. Nice vid
armormaster 3 years ago
This comment has received too many negative votes show
ILLEGAL
ReyMysterioRO 3 years ago
if its illegal y u watchin it???
bumpy105 3 years ago
coz i like illegal things >:)
ReyMysterioRO 3 years ago 2
On the rite track. Sadly all that work and so little workmanship.
roitgun 3 years ago
the mentality of true resistance is not what looks good, but what works =]
atomicengineer 3 years ago 7
I am wondering if in Belgium you are allowed to make homemade guns.
I think it is not illegal if you also use homemade ammo.
Nini246 3 years ago
Where did you get the peices?
elricdean 3 years ago
This comment has received too many negative votes show
just one gunner you are just as fucking stupid as the guy who built. It is ilegal to manufacture a firearm without a BATFE approved Class 2 license. Look, if you want to seem cool and act like you know about guns you can fuck off right now. And seeing how it is home-made of course it is a piece of shit because the barrel has no rifling, dumb ass
iluvsheldon 3 years ago
Ok, mr. iluvsheldon, it is NOT illegal to manufacture firearms without a class 2 firearms license, you just can't sell them. Interestingly, according to the ATF, once you build a firearm (or rebeuild the reciever) you do NOT have to have it even registered with the state you live in unless indicated by state law, that is unless the ATF has changed its laws in the last few days.
KingOfCatfish 3 years ago 3
hey, sorry about this guy's comment, but it was my old account. someone figured out my password. i'm a southern chick from north carolina who knows absolutely NOTHING about guns. one of my old friends thinks he's the shit when it comes to guns and he figured out my password and was using it to belittle people on youtube. i'm sorry but i can promise that it won't happen anymore since i deleted that account and made this new one. sorry he pissed y'all off.
DanaWana88 3 years ago
iluvsheldon you're the fucking wanker who's trying to look cool. This "piece of shit" could kill you with or without rifling you tool. its extremely well done for home made. And why the fuck are you bitching about it being illegal you fucking faggot. Get your facts straight, better yet, kill yourself.
Necronomicomedian 3 years ago 3
fuck you you stupid wetback
elricdean 3 years ago
sorry this guy pissed u off. he stole my password for my 'iluvsheldon' account so i deleted that one and made a new one. i can tell u he's not a wetback...just some white new jersey dickhead ;-]
DanaWana88 3 years ago
he's just bitching because he really IS a faggot. he use to date my best friend and she caught him doing VERY GAY things to himself one day....haha. sorry about his comment tho, he stole my password so i deleted that account and made a new one. sorry if he pissed u off.
DanaWana88 3 years ago
id be afraid to shot that damn thing... dont underestimate the power of those litte .22 shells... i had an old jennings semi-auto .22 pistol and that fucker blew up in my hand and i was diging shrapnel out ouf my hand for about 2hr's... i never thought a .22 had that much power (at the release of the projecticle) ... well until afterwards.
mullikin 3 years ago 2
nice but i would clean it up a little more
kilamin 3 years ago
Sweet!!
FergusonTO35 3 years ago
For the people asking; In America, you can make guns for personal use. You need a license if you wish to sell them.
JustOneGunner 3 years ago
cool! But i already have a .22 Browning buckmark (WHICH IS SO ACCURATE) why shoot a peice of shit? if ur gonna make something homemade make a cannon... not a peashooter LOL
iloveallecchianime 3 years ago
Are you an idiot?
For one thing, it's good experience. This particular firearm, too, is highly concealable -- not to mention that the pressures generated from .22LR are much more manageable and safer to build (especially for a first-timer) a gun around.
Because it's home-made doesn't make it a piece of shit.
JustOneGunner 3 years ago 3
fuck you you dirty wetback mexican
elricdean 3 years ago
true
elricdean 3 years ago
that is great, you should register your name as a company and make them as deringers, (in us)
elhomer12 3 years ago
pretty crude design there. Might not impress JM browning. But Kalashnikov would be proud!!!
SAXD45ACP 3 years ago
if your gonna do a gun video atleast show it firing
RHCPchaosMAYHEM 3 years ago
can u send me one to germani i would give u 30 € :D:D
klugeskind93 3 years ago
Frag doch gleich Herrn Schäuble, ob er dir ne Walther schenkt!
muell0815 3 years ago
atf is on the way to visit you
yerrj 3 years ago
Informative. I know that in the USA, an individual CAN make one firearm for personal use per year, so long as that firearm isn't a machine gun, a short barreled rifle or short barreled shotgun or is a pistol with a smooth bore (which this one might be). You don't need to be a licensed firearms manufacturer in order to make one for personal use.
A police officer friend showed me a similar gun that was made in prison by an inmate. If criminals can make them there, they can make them anywhere.
CorbinDas 3 years ago 2