@cdawg1113 The JWT 700BB are GT28RS's same turbo GTM uses. And this was completed before the GTM kit. Cost is relatively the same. Not bad mouthing the GTM kit.
@MRwszO You can run more boost with the 8.5:1 which will give you higher top-end (HP) power. However, IMO, give up a little top-end for more low-end torque and run 9.0:1. Also look into spraying meth injection for some extra power. CP & Arias are both good pistons.
Sick Setup!! Good Stuff!! Congrats on your build, I hope to get my ST Z tuned to those numbers after i get a better drivetrain setup: NO LSD and stock clutch is about to go out lol
Well how much power were you putting down on that dyno? I hate it when ppl stop it right there! sheesh I run the same 700bb on my 300zx and i put down 640RWHP
also remember, if you started with a 300ZX turbo it has a lower compression ratio (stock) If hes using the stock internals, that may be all he can get without detonation due to the high CR.
This is a 350Z. Not a 300ZX TT. Yes it's on stock internals. And yes this DynoJet is running a high correction factor. Was redynoed on a Dyna-Pack and made 398whp.
wow that doesn't sound like turbo, that sounds like a jumbo fucking jet!!!! niccccccccccccce!
ak0087 10 months ago
@ak0087 LOL Thanks???
Airforcefd 10 months ago
Your car is one of the best sounding twin turbo 350z's I've seen, whether IRL or online. Do you think its the Stillen exhaust?
MrSkantron 1 year ago
@MrSkantron Possibly. However I'm looking to get the Greddy Evo TT.
Airforcefd 1 year ago
@Airforcefd get gtms kit, much better turbos, as they are bot water and oil cooled garrett turbos of your choice of size and it's slightly cheaper.
cdawg1113 7 months ago
@cdawg1113 The JWT 700BB are GT28RS's same turbo GTM uses. And this was completed before the GTM kit. Cost is relatively the same. Not bad mouthing the GTM kit.
Airforcefd 7 months ago
would you know how much ur z gained from the Cosworth Plenum plz?
Gcoups 1 year ago
@Gcoups No idea. I added it when I did the kit. Heard it really benefits when running F/I.
Airforcefd 1 year ago
actully im planing to take the car to 700whp level as hight boost what do you think is the best comprestion pistons 9.1 or 8.5 either cp or arias?
thanks
MRwszO 1 year ago
@MRwszO You can run more boost with the 8.5:1 which will give you higher top-end (HP) power. However, IMO, give up a little top-end for more low-end torque and run 9.0:1. Also look into spraying meth injection for some extra power. CP & Arias are both good pistons.
Airforcefd 1 year ago
do you think it's safe to run the 350z stock blockwith 487 whp??
i have greddy tt 350z and im runing 400 whp cuase im afraid to loss my block if i go up
MRwszO 1 year ago
@MRwszO That 487whp is with a 6000 foot elevation correction factor. I've re-dyno the car and it make 420+/- on 10psi.
I wouldn't press your luck. 400whp is a respectful power level.
Airforcefd 1 year ago
what pistons and rods you runing??
i love the power
MRwszO 1 year ago
@MRwszO Stock block. 35k+ miles on it too now.
Airforcefd 1 year ago
Sick Setup!! Good Stuff!! Congrats on your build, I hope to get my ST Z tuned to those numbers after i get a better drivetrain setup: NO LSD and stock clutch is about to go out lol
remusic8 1 year ago
lul nvm nvm i saw the description DOH
ReSmartedMAN 2 years ago
Sweet vid! you have any vids of just plain revving the car?
And could you pm me with mods? (exhaust, ect)
ReSmartedMAN 2 years ago
ur HKS SSQV sounds pretty nice =P
XsuperbikeX 3 years ago
gotcha my bad man! thanks still very nice 350 brah. Keep up the good work!
daniel32nicolosi 3 years ago
Well how much power were you putting down on that dyno? I hate it when ppl stop it right there! sheesh I run the same 700bb on my 300zx and i put down 640RWHP
daniel32nicolosi 3 years ago
Click "more info" and you'll have your answer.
Airforcefd 3 years ago
also remember, if you started with a 300ZX turbo it has a lower compression ratio (stock) If hes using the stock internals, that may be all he can get without detonation due to the high CR.
mrZdude 3 years ago
This is a 350Z. Not a 300ZX TT. Yes it's on stock internals. And yes this DynoJet is running a high correction factor. Was redynoed on a Dyna-Pack and made 398whp.
Airforcefd 3 years ago
I know what it is, daniel32... said his 300zx put down 640whp with the same 700bb...
mrZdude 3 years ago
Gotcha.
Airforcefd 3 years ago