@2strokedetroit - I realize that a Bobcat S130 normally "Ain't no" 2 stroke,I have 3 of them and 2 perkins powered JCB Robots.The S130 is a non turbo engine that just does not rev anywhere near as quick as the engine in this unit. If you listen when he is going up and down those ramps this sure is a very responsive diesel and sounds more like a snowmobile engine than a compression ignition engine.
@baritonefunk he might have messed with the pump. Im not sure, but I know our JD 325 (yes, before you go making assumptions im a stupid cousin-fucking hick, I do run equipment) is electronic injection and can rev as fast or faster than that. I dont know, I dont like them bobcats too much.
This guy isnt as good as everyone thinks he is, look a red sign saying bob-cat, hes probly a guy who grew up just with bob-cats, and drove plenty of them.
Its like teach a kid to ride a bike 24/7 all the time, hes gunna become good
It must be getting oil or the warning alarm would go mental and shut it down if oil pressure dropped to dangerous level... Exceptional lever control, Nice work...
I don't think 6mbtttr9 is being pompus. He's giving props for the rail tricks that are amazing. I've been in the equipment industry for many years and I know a lot of operators who can easily do this stuff. I can only do a little but I have to have materail or some kinda weight in my bucket. Its way cooler watching full size articulating front end loaders do this.
He's running a small wheeled machine; much easier to do than on a large and/or track machine. I did this juvenile stuff on rent equip but when co I worked for bought a c190 new holland (like a t300 but not as nice) i had more respect for a $35000 machine, but i messed around a bit. Tracks make it harder, as do heavier engine and more ass weight. Flat land tricks not 2 hard; rail tricks pretty skilled! 2 steering sticks on Bobcat make this easier than on "Cat" control machines
Well if you have ever driven a bobcat, you would know that anyone who can do something like this guy is doing, can pretty much get a job ANYWHERE. If he ever gets laid off, he could really use this video as a great reference. :)
That guy isn't by chance a Brazilian named Asio? He used to own a rental shop next to me a long time ago, and he could do all sorts of stuff like that on a bobcat. Sometimes he'd spin around like at 3:20, but get to rocking the machine and end up on the side. He left the states about 10 yrs ago.
They would have obviously had to modify some parts of the machine to do these stunts. For the machine to be totally tipped vertical it would be starved of hyd. oil, fuel, and engine oil as it is designed to run horizontal with a maximum allowable angle of 30 degrees or so.
I like it to, I had worked on bobcat 2 years.. and can something like that... its nice job, but this vibration all day fucks your back... realy.. P.S. Nice Video.
The only bad outcome would be engine wear due to lack of oil flow. The tilted engine will eventually starve the oil pump and the bearings lose oil, causing damage. I have already serviced two machines that seemed to have suffer from this kind of stunt. The Deutz engines in Bobcat 863's are the most susceptible it seems. I have done this myself with my own machine though.
i used to throw my pack of smokes on the ground in from of my bobcat and bet the FnG's 10$ i could pick it up with my hands without taking my seatbelt off ... they always take bet just to see how the hell i do it ... yeah i win everytime
skidloaders are quite balanced. with the attachment (bucket in this case) extended upwards, it creates a balance point, sorta like the long pole that a tightrope walker uses.
HAHAHA, yes I love it. I operate a skidsteer everyday at work and I don't know. Yeah to someone whose never been around one of these, or operated one it looks cool.
But it's really not that big of a deal. I just love how people view and comment as if the very laws of physics are being broken.
The engine is starved of oil while the bobcat is at extreme angles that it wasnt built to handle! It wouldnt damage the engine if it didnt have a skid plate either.
@MrHeavygamer You think we dont know that already?
MegaBOBCATMAN 3 weeks ago
This has been flagged as spam show
(A) example A300 means All Wheels Steer
(S) example S850 means Skid Steer Loader
(T) example T870 means Tract Loader
Off of Bobcat Website
MrHeavygamer 2 months ago
hahaa
pIayya 2 months ago
bow hunting skills....computer hacking skills....bobcat skills...
CallOfSpooge 3 months ago
Good to know all the hours I put in making those hydraulics is being put to good use..
jizzyjame 5 months ago
now if his hydraulics fail he is screwed lol hes good tho
Narrcotics101 5 months ago
Woow this is nice!
Yonimontoyam 5 months ago
how the fuck do you practice that shit LOL
hahaureadmyname 6 months ago
Skillful - yes but "the worlds most..." - that's baloney!
dienstagwicht 6 months ago
i met my wife doing shit like this in a bobcat...
greenleafbrandi 6 months ago
This is one heck of an operator!!! WOW!!!
mindydc1 6 months ago
I dont see any cat or Bob.
mihan73 6 months ago
nice way to oil starve the engine.
trappy77 6 months ago
Wat happen during the lunch break
NEB1121 7 months ago
Oh my goodness such great driving skill XD
themangix357 8 months ago
nice work if u can get it! lol
TriggerOvPeth 8 months ago
this is what happens when you let chuck norris drive a bobcat
jrod08rolltide 8 months ago
I want cool spinny blinky lights on my 960. Maybe I can be this cool and never get shit done, But look good doing.. eerr.. NOT doing it..
Tommybearyo 8 months ago
I can't believe the engine does not run dry of oil
The67rockstar 9 months ago
OMG i do this every day at work lmmao
GrantChampionTV 9 months ago
bobcat ballet lol
NJFordPops08005 9 months ago
It's like the dancing hippos in Fantasia!
SeattlePioneer 9 months ago
trying to save ya tread there mate
mollykeishasandy 10 months ago
in 3rd world countries this is a past-time
uuuultra 10 months ago
и что за погрузчик? который вперед перевешывает!!!?
Бред импортный...
demon19dim 11 months ago
Wonder how the oil pressure is when it's up like that
ramdslpwr 1 year ago
bobcats suck, gotta go with cat
Danro05 1 year ago
that ain't nothing I was able to put all 4 wheels on the air for more that 2 hours...cuz I flipped it over LOL
thenenebello21 1 year ago
nice
acerto22 1 year ago
that dude has way to much time on his hands
blakelyholley 1 year ago
I used to have a 743 and would practice this kind of stuff for hours but never tried doing it on a balance beam that was cool.
mrbobsshow 1 year ago
i run those all day Nd i can only do a wheelie for 3.5 SEC NO WAY IN HELL I CAN DO ALL THAT
bcanderson100 1 year ago
tipo car!!!!!!!!!!!!!!!!!!!
mpbvs 1 year ago
It kinda sounds like it has a two stroke engine,that would solve the oil pump question.
baritonefunk 1 year ago
@baritonefunk no these aint no 2 strokes
2strokedetroit 1 year ago
@2strokedetroit - I realize that a Bobcat S130 normally "Ain't no" 2 stroke,I have 3 of them and 2 perkins powered JCB Robots.The S130 is a non turbo engine that just does not rev anywhere near as quick as the engine in this unit. If you listen when he is going up and down those ramps this sure is a very responsive diesel and sounds more like a snowmobile engine than a compression ignition engine.
baritonefunk 1 year ago
@baritonefunk even two them ole two stroke diesels still had a crankcase that was sealed. It's bottom end was the same as a regular engine.
2strokedetroit 1 year ago
@baritonefunk he might have messed with the pump. Im not sure, but I know our JD 325 (yes, before you go making assumptions im a stupid cousin-fucking hick, I do run equipment) is electronic injection and can rev as fast or faster than that. I dont know, I dont like them bobcats too much.
2strokedetroit 1 year ago
can the oil pump operate at that angle over a time period like that? i bet that needs an engine now.
unimog875 1 year ago
snjat protivoves vot i vesj prikol
ludmilalucifer86 1 year ago
@LastGouki...<<< this guy a perfect example why you should not smoke crack, you become RETARTED
romyayrom 1 year ago
16 people cant balance like this guy can
Kbling22 1 year ago
I hope he has a seat belt
caganb 1 year ago
cest la chose la plus facile surtout avec un bobcat tout le monde cest faire ca ceux qui ont en utilisation un bob cat
fghlojhhgg 1 year ago
damn he really does know what hes doin this is amazing good job
TheFireman203 1 year ago
This guy isnt as good as everyone thinks he is, look a red sign saying bob-cat, hes probly a guy who grew up just with bob-cats, and drove plenty of them.
Its like teach a kid to ride a bike 24/7 all the time, hes gunna become good
LastGouki 1 year ago
@LastGouki Dude,,, this comment makes no sense, at all.
mightyjochen 1 year ago
@mightyjochen LOL! +1
007spy8 1 year ago
@LastGouki jelousy gets you nowhere
haunishead 1 year ago
@LastGouki ok you make no sense he is really good cus he practiced dippy
TheFireman203 1 year ago
damn and i thought i was good at balancing wheelchairs
BulldogGiuseppe 1 year ago
i bet his grading skills are impecable
mcd5858 1 year ago
i'm suprised that it stayed running for some of that.
bucko60 1 year ago
i want to see the machine he practiced with otherwise awesome operator
moparmenace59 1 year ago
I Want Revenge! bit . ly/jerku
MrHotbeef 1 year ago
is this mentioned anywhere in the OSHA books?
boozah650 1 year ago 6
@boozah650 I lol'd
crowdcontrol792 1 year ago
I'm sure his resume stands out at constuction site interviews
Romtillo 1 year ago
HAHA I like doing stunts on my 743 bobcat. It is really not that hard. You just have to be careful.
stevenmorookian16 1 year ago
i can do that better than you
bemari325i 1 year ago
wtf.
chopperboy17 1 year ago
haha, i want to know how you would practice this without breaking anything
StealthyGoats 1 year ago
Hahahaha! That dude's got mad skills!
Great video :-)
CPS2 1 year ago
It must be getting oil or the warning alarm would go mental and shut it down if oil pressure dropped to dangerous level... Exceptional lever control, Nice work...
MrWhattolookat2day 1 year ago
i wonder if the engine can suck up oil when the bobcat is angled vertical :/ doubt it
AndrewEG 1 year ago
woooooow :)
Petox11 1 year ago
he might attach this clip to his CV :)
mysticvintage 1 year ago
Wow!! I love Bobcats, mini exs, skid-steers, 5 years,this guy has unbelievable talent. Im amazed.
dylantahl 1 year ago
Bobcat S130
fqdn1 1 year ago
Theres gotta be some kind of record for this if not make one! Call it extreme bob catin!
The121582 1 year ago
i often wonder if being on such an angle for so long would cause issue with the engine oil supply? Or are these things Dry_sumped?
lynel1985 1 year ago 5
WOW!!! COOL!!! VERY GOOD!!!!
Fordfanatiker87 1 year ago
joder ke pasada tengo ke aprender...
15204044 1 year ago
ive drove bobcat for 7 years and this guy is pretty good
mrwadeluke 1 year ago
increible.........mañana lo intento bro!
EOLICOSOLAR 1 year ago
COMO T FUE?
maximocremoso 1 year ago
Thats pretty cool!
adsc2006 2 years ago
This comment has received too many negative votes show
Try Doin this in your ass.
Rick48Racer 2 years ago
this guy definetly has skill>
jayhovasi 2 years ago 2
Awesome :D
HAMER9512 2 years ago
Try doing this on a job site
eworldtalk 2 years ago
shor he does idiot and thats so so so so madd man
dark12176 2 years ago
my grandma dos it blind folded
Mr515088 2 years ago
Wow he figured out he could balance omg.
Rick48Racer 2 years ago
I don't think 6mbtttr9 is being pompus. He's giving props for the rail tricks that are amazing. I've been in the equipment industry for many years and I know a lot of operators who can easily do this stuff. I can only do a little but I have to have materail or some kinda weight in my bucket. Its way cooler watching full size articulating front end loaders do this.
twisted4good 2 years ago
this guy must be real bored at work. awesome stuff
j00hz 2 years ago
hey doesnt that affect the engines oil level?
Rabidondi 2 years ago 3
go the stangs
killahhhh 2 years ago
He's running a small wheeled machine; much easier to do than on a large and/or track machine. I did this juvenile stuff on rent equip but when co I worked for bought a c190 new holland (like a t300 but not as nice) i had more respect for a $35000 machine, but i messed around a bit. Tracks make it harder, as do heavier engine and more ass weight. Flat land tricks not 2 hard; rail tricks pretty skilled! 2 steering sticks on Bobcat make this easier than on "Cat" control machines
6mbtttr9 2 years ago
engine oil level an issue?????
oakb52 2 years ago 4
thts not skill thts called working in your bobcat to much so you know it to well
themaster91156 2 years ago
GO BOBCAT!!!!
Nucleartreasure 2 years ago
I've had a bobcat up on 2 wheels, but it wasn't because of talent.....lol
Pac3steel 2 years ago 74
@Pac3steel lol everyday man lol
mcd5858 1 year ago
@Pac3steel Lol Yeah me too.
auzzies0angel 5 months ago
nothing stops a bobcat
manofthehour91 2 years ago 11
holy fuck thats skill
andrew0901280 2 years ago
dam, bobcats are durable as a mother fucker
bombercat123 2 years ago
The hell with the ARMY I want that guys job!!!!!!!!!
deha24 2 years ago 3
SKILL
3liasInnebandy 2 years ago
skill
noobs12349 2 years ago
Comment removed
bossman380 2 years ago
cool haha
Johnzx2 2 years ago
fukin cowboys
MrmeatyJY 2 years ago 2
jealous because you cant do it
nuttybar9 2 years ago
This has been flagged as spam show
stuiped i can do that
slaying4fun 2 years ago
I wonder if he's good really working with the bobcat or if he's just good doing tricks with it!!
cabreraluis2012 2 years ago
i'm sure if can do stunts like this, he can also work really good and fast, because he knows how to keep the balance and all that.
tolishel 2 years ago 24
NO, he cant'n work really fast, because he learn new tricks at work :-))
lugiodrummer 2 years ago
@tolishel rien a voir mais bon
fghlojhhgg 1 year ago
@tolishel What do you think he was doing all those times he should have been working? :D
ralekriver 8 months ago
id say a little of both in my opinion. he is freaking good though.
needzpower2 2 years ago
Well if you have ever driven a bobcat, you would know that anyone who can do something like this guy is doing, can pretty much get a job ANYWHERE. If he ever gets laid off, he could really use this video as a great reference. :)
erealmz 2 years ago 2
i wonder it too.
Terbasmaster 2 years ago
you might think your good but you stand no chance when im around..if i was there you wouldint have a job to go too...i am the bobcat master....
kayanasinlondon 2 years ago
you sound like a retard
tberger90 2 years ago
lol my friend can do this
Daclimaxis 2 years ago
U #$%^#@%^%^@%
slaying4fun 2 years ago
good skills that stuff not easi first time i done front wheelies fell throw front door nearly killed miself
SLICER0045 2 years ago 2
Wow, who thinks of this shit, bob cat stunting?
Anyways, nice
IPlayInBeastMode 2 years ago
Amazing driver!
See "Twins In Transit"' the new comedy! The Twins have an audition, they've got to get there any way they can...A Bobcat?
THETWINBROTHERS 2 years ago
around like at 3:20,
primorec 2 years ago
That guy isn't by chance a Brazilian named Asio? He used to own a rental shop next to me a long time ago, and he could do all sorts of stuff like that on a bobcat. Sometimes he'd spin around like at 3:20, but get to rocking the machine and end up on the side. He left the states about 10 yrs ago.
Good job whoever it is.
crisco27544 2 years ago
nah man, this is a swedish dude :)
Barillaa 2 years ago
must have dry sump
4mulas 2 years ago
@crisco27544 lots of people can do this....including myself.......i just happens when u start wasting time at work
MrSlendersauce 1 year ago
omg...very good!!!5 stars
MgWk 2 years ago
They would have obviously had to modify some parts of the machine to do these stunts. For the machine to be totally tipped vertical it would be starved of hyd. oil, fuel, and engine oil as it is designed to run horizontal with a maximum allowable angle of 30 degrees or so.
curtisk84 2 years ago
help me people.... is he or that so fucked up?
7164921823 3 years ago
Kool
do it with your money mother fucker
7164921823 3 years ago
great video
MASKIN08 3 years ago
now thats skills... good job bro
jsifo2 3 years ago 8
i am surprised the engine didnt blow with all the oil on one end without the pump pumping the oil up O_O
SpiritsoftheWolf 3 years ago 2
I like it to, I had worked on bobcat 2 years.. and can something like that... its nice job, but this vibration all day fucks your back... realy.. P.S. Nice Video.
Hadzunijus 3 years ago
Skillz man, SKILLZ!!!!
NorthWestJeeper 3 years ago 3
thats freaking crazy!
snsevenone 3 years ago 5
This comment has received too many negative votes show
i've been driving Bobcats for 7 years and i am only 16 and can do that...its freakin sweat.
evanthemm 3 years ago
This comment has received too many negative votes show
fucking why?
booger74 3 years ago
The only bad outcome would be engine wear due to lack of oil flow. The tilted engine will eventually starve the oil pump and the bearings lose oil, causing damage. I have already serviced two machines that seemed to have suffer from this kind of stunt. The Deutz engines in Bobcat 863's are the most susceptible it seems. I have done this myself with my own machine though.
chargermopar 3 years ago
somebody order this guy a new set of drive chains
dannytr84 3 years ago
dam awsome
rsgeak94 3 years ago
i used to throw my pack of smokes on the ground in from of my bobcat and bet the FnG's 10$ i could pick it up with my hands without taking my seatbelt off ... they always take bet just to see how the hell i do it ... yeah i win everytime
here2LQQk 3 years ago
thats awesome
ford005 3 years ago
idolo grande maestro buenisimo
sin palabras
bombero416 3 years ago
jedi bobcat
zythepsarian 3 years ago
the force is strong with this one
rh44pilot 3 years ago
&ééé
chkilit10 3 years ago
probably a dry sump system. I would assume it is from the factory. this guys got skill lol
thugathugacation 3 years ago
Break dancing with a bobcat, good stuff. Not good for the engine though!
Xx69roadrunnerxX 3 years ago
wow. i've managed to pop a wheelie in a John Deere 317 skidsteer befor but this is rediculious. though i think i see how he's doing it.
ChevRcr454 3 years ago
thast gotta be bad for the pore diesel...
smallengine13 3 years ago
the kind of boss that lets u do stuff liek that is surely an awesome boss haha
horsecobber 3 years ago
How is this possible??!!!
michidomi 3 years ago
skidloaders are quite balanced. with the attachment (bucket in this case) extended upwards, it creates a balance point, sorta like the long pole that a tightrope walker uses.
zhivotnoya 3 years ago
no way it has a balance point?!
vsantonioli 3 years ago
no need to be a smart ass. michidomi asked a question, I replied. Being a smart ass like yourself must get your ass kicked alot in school...
zhivotnoya 3 years ago
i was the one kicking ass :)
vsantonioli 3 years ago
I was the one kicking ass :)
vsantonioli 3 years ago
HAHAHA, yes I love it. I operate a skidsteer everyday at work and I don't know. Yeah to someone whose never been around one of these, or operated one it looks cool.
But it's really not that big of a deal. I just love how people view and comment as if the very laws of physics are being broken.
stehenallein 3 years ago
what kind of owner would let his employee do that lol
reallifeguitarhero 3 years ago
moron! that is an exibition can't you see.
35ams 3 years ago 3
es muy babron el operador
viva mexico, coytuca de catalan gro.
cesarcocho 3 years ago
preety damn cool
yamahabansheerider 3 years ago 2
i can ride on back wheel on my bobcat :D:D:D
krzychoxDDD 3 years ago 3
the best on you tube in his kind!
tectrencher 3 years ago
i wish he rams the car
booger0109 3 years ago
then his boss comes along...
wtf!! get back to your work lol
racerx007666 3 years ago
what the hells the point of that?
TinyMatt27 3 years ago
i love this machines
camg111 3 years ago
well some is hard some is not
atvrider99 3 years ago
dude not being mean but its not that hard
atvrider99 3 years ago
yeah i would like to see you do it.
book505 3 years ago
This comment has received too many negative votes show
Hes not that good
australianredneck 3 years ago
00:40 isnt that bad for ur engine?
stevo332 3 years ago
it can't reck the engine because there is a skid plate
book505 3 years ago 2
The engine is starved of oil while the bobcat is at extreme angles that it wasnt built to handle! It wouldnt damage the engine if it didnt have a skid plate either.
Xx69roadrunnerxX 3 years ago
you think he gives a shit?
81broncoman 3 years ago 3
This comment has received too many negative votes show
No because he's a fucking moron!
Xx69roadrunnerxX 3 years ago
do you have a seatbelt yeeeeeeeeeeeeeeeeeeeeeh
michaelcoutta 4 years ago
He is from sweden!
JCB436 4 years ago
wow. Thar car was close by to
inspiringKevorkian 4 years ago
that's about all their good for.
hulltwins 4 years ago
idiot
DonceDulskis 3 years ago
WOW I thought I was pretty good on one....i haven't tried that yet!!!! Mmmmm gonna have to practice that....awesome stuff!!!! Good Work Man!!!