i have just a quick question about rinsing ..after removing the water to make it with..do you use the mixer to rinse with ,or do you just add new water with out mixing it up.with the mixer..cause it takes days for it to settle after i used the mixer to rinse it and lost most of it..and stays cloudy with very little settling after 2 or 3 days? the first run on making it settles perfect clear water on top with in hours..first rinsing with the mixer cloudy as all hell? but what i get works great
I read that if the salt doesn't contain magnesium hydroxide that have to add a teaspoon of Epsom salt. The salt I have says it has magnesium chloride but no hydroxide. Maybe I should add the Epsom salt. But that site also says instead of bringing PH up 12 then down to 10.78, it says bring it down to 1-3.5 then up to 8.5-8.7.....totally different end process.....but I have 10 lbs of this salt.
Tried this. At then end where the m-state is soposed to drop..nothing but clear..(went down to 10.78 with distilled white viniger).. but I used Adovia dead sea salt....is this salt junk? I found this same recipe elsewhere.
You can get KOH at the supermarket or chemical supply (cleaning industry) you can also use lye NaOH (Potassium Hydroxide). I believe pot ash was used in ancient times. I wouldn't use an pH up as I'm not sure of its complete chemical make-up.
So when you have the finished product completed at the correct ph, how do you consume the ormus? Do u just stir it up and drink the water or do you take the powder out and eat that?
Help! I've just made my first batches of ormus following your video but after 20 hours there was still no sign of any participate settling at the bottom. So I added 3 more tea spoons of dead sea salt to two of the batches and mixed it up again and it's been 8 hours and still no sign of participate. I've just made up a small batch using some good quality rock salt I had in the cupboard to see if that works and shook it up instead of using the hand blender. I have the jars sitting in the garden
What ratio is the yield vs the amount of salt you use? And what would you say the effects have been you can discern, I think I would trust this preparation much more than some of the other strange fluids or powders you can buy online
I just learned of this stuff on Saturday and I want to try doing it. Tell me, can you use Himalayan rock salt instead of sea salt?
Also I've read you can use a solution of Lye instead of the sodium hydroxide (or maybe it the same thing) and that you can get food grade Lye. Would that be better to use?
I would make this just for feeding plants as I hear it makes them grow like crazy.
@fuelban I wouldn't be eating KOH or NaOH either. Also it's not my place to suggest that people should or shouldn't consume anything. The video is about how to make it not what to do with it...
@hohcells , cool, that's good enough for me, LOL, seen a couple where guys are seemingly consuming it, I found it quite scary to be honest, Interesting BUT SCARY ...LOL,I am interested in orumus & orgone as i have seen certain things occur when orgone is used in HHo, I plan to put some videos up after Easter about what i noticed, and want to test orumus out the same way and see if that reacts too. thanks guy.
could you do a video on the rinse portion? that is the part that i just don't quite understand....i found this video quite helpful, just need to see how the second portion is done!
Thanks for the information! But I wish you would make a complete video on this. I mean, it's all very nice and easy to follow, but would be excellent to have a video tutorial all the way through the process instead of just the mixing part..
the dead sea is a radiation cesspool. My friend has done land regeneration work there, and theres a local epidemic of cancer. something to do with the dead sea being 400meters below sea level. and the airborne radiation from the crap that goes on around there settles there.
@Damaruth Salt can be made from acid and alkali mixed in solution to get a neutral PH. I assume that when the sodium hydroxide is added it replaces whatever served as the alkali in the dead sea salt, so I assume that constitutes the ORMUS that drops out of solution. Dead Sea Salt is mostly magnesium salt which is good for you. Could someone please provide the actual chemistry we are grasping for :-)
I have made my own ORMUS in a spaghetti jar just like Hohcells... 'cept without the stick blender - I used a wooden spoon.
I've had great success with my first batch! I used:
French, Celtic salt which I found was itself quite inexpensive - it's weighty so, it's the delivery that costs the most!
Distilled water, digital ph meter, decanting every day for four days by pouring off the top alkaline water thrice, but using a hand pump to scree-off the final alkaline top- water... easy!
I just did me a pre batch i did not use lye, i believe you can use ph balanced water that already has the lye in it and the alkaline. But i used some of the ormus water i just bought online from a guy here in georgia and then added some distilled water and my sea salt couldn't find dead sea salt but i think sea salt can work. i'll wait 7 days and see.
ormus is suppose to superconduct, if someone can demo that to me with the stuff produced I would believe it. so far scientists have not come up with room temperature superconductors (except for in large bundles of carbon non-tubes and they are closer but not there yet in ceramics (still have to be cooled to superconduct)
I am inclined to believe that this is junk science since ormus is supposedly made from gold, silver, platinum and/or iridium etc. (+ other platinum group metals) yet dead sea salt and regular sea water salt does not cotain this elements (According to wikipedia) or if they do in very tiny quantities on in the table, although I am willing to try this experiment myself will let you know the results.
@keiichicom check out barry carter, cure for cancer part 9, it has a the only demo i have seen, still looking for more, but am interested enough to have ordered my first batch
@keiichicom "Supposedly" the elements are not in their usual form and will not bond to any other elements now they are in a 'high spin' state, this is why they were never noticed before.. the bonding is the only way to test for their presence, as far as I've been told from my attempts to understand this anyway XD
What if you were to use high alkaline Kangen water to dissolve the minerals? Would this work?
There is a 11.5 water for degreasing and a 2.5 acid water for disinfecting. Micro-clustered water. There is a 8.5, 9.0 and 9.5 for drinking. High electron water. Could you use this water for the production of ormus?
I accidentally removed a recent comment instead of replying. Although the feedback was not constructive the comments were valid. I mention in the video you can use just about any kind of container. In fact you can't, you should use a non lye reacting container like glass.
research white powder gold-its not ormus settling in the water,its mostly magnesium and calcium hydroxide pulling the so called ormus down with the precipitation.
in one word P-S-E-U-D-O-S-C-I-E-N-C-E
pilladisimo87 18 hours ago
@RavenPrecept the results should be magneseum hydroxide sodium hydroxide and a little bit of m-state (high-spin in other words) material :)
Halo3machenima 1 month ago
@paulksycki better with lye water (food grade) epsom salts could work. I will make a video soon about ormus. Check out my channel for it soon.
Halo3machenima 1 month ago
i have just a quick question about rinsing ..after removing the water to make it with..do you use the mixer to rinse with ,or do you just add new water with out mixing it up.with the mixer..cause it takes days for it to settle after i used the mixer to rinse it and lost most of it..and stays cloudy with very little settling after 2 or 3 days? the first run on making it settles perfect clear water on top with in hours..first rinsing with the mixer cloudy as all hell? but what i get works great
1wicked2008 1 month ago
Does anyone know where to find Etherium Gold? (ORMUS)
mvw80 2 months ago
do you dry it out or do u leave it in water? and if water how much ..if u dry it how?
1wicked2008 2 months ago
could please someone tell me what are the benefict you get taking this? how i should taking in? how often? I'm lost . . .
Marc3loBustos 3 months ago
Great stuff. Very useful for people. Do you introduce consciousness as an ingredient?
OrmusSuperfood 4 months ago
What about formic acid instead of vinegar?
paulksycki 5 months ago
I read that if the salt doesn't contain magnesium hydroxide that have to add a teaspoon of Epsom salt. The salt I have says it has magnesium chloride but no hydroxide. Maybe I should add the Epsom salt. But that site also says instead of bringing PH up 12 then down to 10.78, it says bring it down to 1-3.5 then up to 8.5-8.7.....totally different end process.....but I have 10 lbs of this salt.
paulksycki 5 months ago
Tried this. At then end where the m-state is soposed to drop..nothing but clear..(went down to 10.78 with distilled white viniger).. but I used Adovia dead sea salt....is this salt junk? I found this same recipe elsewhere.
paulksycki 5 months ago
@paulksycki haven't tried to do it this way (using vinegar) so can't really say.
doesn't sound like you used a hydroxide (sodium or potassium)?
I still have some dead sea salt left if you want to give it a try.
hohcells 5 months ago
You can get KOH at the supermarket or chemical supply (cleaning industry) you can also use lye NaOH (Potassium Hydroxide). I believe pot ash was used in ancient times. I wouldn't use an pH up as I'm not sure of its complete chemical make-up.
hohcells 5 months ago
How or where to get the sodium hydroxide? Can I use PH up like for hydroponics or an aquarium?
JBarth22 5 months ago
Can I ask why you don't use seawater?
sustainablehuman 5 months ago
You can! - different oceans, lakes, etc. will have different minerals and concentrations.
hohcells 5 months ago
So when you have the finished product completed at the correct ph, how do you consume the ormus? Do u just stir it up and drink the water or do you take the powder out and eat that?
futureseal01 6 months ago
Comment removed
1111GENESIS 7 months ago
thanx for making this video
Lycaeusification 7 months ago
the white powder you get from this experiment is aluminium hydroxide, and when you consum it you get verry annoying tinglings all over your body.
finwe1992 8 months ago
Ormus is not the same as the philosophers stone
bahiyyah19 10 months ago
Help! I've just made my first batches of ormus following your video but after 20 hours there was still no sign of any participate settling at the bottom. So I added 3 more tea spoons of dead sea salt to two of the batches and mixed it up again and it's been 8 hours and still no sign of participate. I've just made up a small batch using some good quality rock salt I had in the cupboard to see if that works and shook it up instead of using the hand blender. I have the jars sitting in the garden
11Rachee11 11 months ago
What ratio is the yield vs the amount of salt you use? And what would you say the effects have been you can discern, I think I would trust this preparation much more than some of the other strange fluids or powders you can buy online
Rrrrobbo 11 months ago
I just learned of this stuff on Saturday and I want to try doing it. Tell me, can you use Himalayan rock salt instead of sea salt?
Also I've read you can use a solution of Lye instead of the sodium hydroxide (or maybe it the same thing) and that you can get food grade Lye. Would that be better to use?
I would make this just for feeding plants as I hear it makes them grow like crazy.
germanicelt 1 year ago
is potassium hydroxide not rather Hazard to consume ? don't think id be in to that.I mean it pot hydrox comes with a hazard warning on the label ???
Thom
fuelban 1 year ago
@fuelban I wouldn't be eating KOH or NaOH either. Also it's not my place to suggest that people should or shouldn't consume anything. The video is about how to make it not what to do with it...
hohcells 1 year ago
@hohcells , cool, that's good enough for me, LOL, seen a couple where guys are seemingly consuming it, I found it quite scary to be honest, Interesting BUT SCARY ...LOL,I am interested in orumus & orgone as i have seen certain things occur when orgone is used in HHo, I plan to put some videos up after Easter about what i noticed, and want to test orumus out the same way and see if that reacts too. thanks guy.
Thom.
fuelban 1 year ago
Você também está muito ao movimento que ruma homens a liberdade.
Wiktor Schauberger e Walter Russel e Wilhelm Reich concluem a minha lista assim como Nikola Tesla.
Obrigado por assistir the nature was my teacher.
djdsfhakdfhlksdhklf 1 year ago
how do you rinse it?...
Squeake 1 year ago
@Squeake Rinsing the Ormus is a simple and straight forward process.
1. Once the ormus has settled on the bottom, syphon the clear solution from the top of your container.
2. Replace the removed volume of liquid with fresh clean water and mix through.
3. Wait for it to settle again, then repeat step 1 and 2.
4. Do this 3-4 time to ensure the ormus is clean and the pH is under 9.
Hope this helps
hohcells 1 year ago
could you do a video on the rinse portion? that is the part that i just don't quite understand....i found this video quite helpful, just need to see how the second portion is done!
darkforestpyxi 1 year ago
How much ormus should you cunsume daily? Won't wanna get an overdosis :-) Anyone who has eperienced any positive effects by making it this way?
Kamalood 1 year ago
Thanks for the information! But I wish you would make a complete video on this. I mean, it's all very nice and easy to follow, but would be excellent to have a video tutorial all the way through the process instead of just the mixing part..
blaafugl 1 year ago
the dead sea is a radiation cesspool. My friend has done land regeneration work there, and theres a local epidemic of cancer. something to do with the dead sea being 400meters below sea level. and the airborne radiation from the crap that goes on around there settles there.
i would source another salt supply
KanadianKain 1 year ago
can you please explain the chemical reaction that happens here?
Damaruth 1 year ago
@Damaruth Salt can be made from acid and alkali mixed in solution to get a neutral PH. I assume that when the sodium hydroxide is added it replaces whatever served as the alkali in the dead sea salt, so I assume that constitutes the ORMUS that drops out of solution. Dead Sea Salt is mostly magnesium salt which is good for you. Could someone please provide the actual chemistry we are grasping for :-)
RavenPrecept 1 year ago
Please tell me how you made the lye water-amounts and so forth
mormonwoman52 1 year ago
I have made my own ORMUS in a spaghetti jar just like Hohcells... 'cept without the stick blender - I used a wooden spoon.
I've had great success with my first batch! I used:
French, Celtic salt which I found was itself quite inexpensive - it's weighty so, it's the delivery that costs the most!
Distilled water, digital ph meter, decanting every day for four days by pouring off the top alkaline water thrice, but using a hand pump to scree-off the final alkaline top- water... easy!
rangumai 1 year ago
I just did me a pre batch i did not use lye, i believe you can use ph balanced water that already has the lye in it and the alkaline. But i used some of the ormus water i just bought online from a guy here in georgia and then added some distilled water and my sea salt couldn't find dead sea salt but i think sea salt can work. i'll wait 7 days and see.
anuthehigh 1 year ago
typo carbon nanotubes
keiichicom 2 years ago
ormus is suppose to superconduct, if someone can demo that to me with the stuff produced I would believe it. so far scientists have not come up with room temperature superconductors (except for in large bundles of carbon non-tubes and they are closer but not there yet in ceramics (still have to be cooled to superconduct)
keiichicom 2 years ago
@keiichicom if you watch the "David Hudson-ORMES" series, he has produced superconductors at room temp.
ldn4502 1 year ago
@ldn4502 ty, I will watch it.
keiichicom 1 year ago
I am inclined to believe that this is junk science since ormus is supposedly made from gold, silver, platinum and/or iridium etc. (+ other platinum group metals) yet dead sea salt and regular sea water salt does not cotain this elements (According to wikipedia) or if they do in very tiny quantities on in the table, although I am willing to try this experiment myself will let you know the results.
keiichicom 2 years ago
@keiichicom check out barry carter, cure for cancer part 9, it has a the only demo i have seen, still looking for more, but am interested enough to have ordered my first batch
pietlightworker 1 year ago
@keiichicom "Supposedly" the elements are not in their usual form and will not bond to any other elements now they are in a 'high spin' state, this is why they were never noticed before.. the bonding is the only way to test for their presence, as far as I've been told from my attempts to understand this anyway XD
Rrrrobbo 11 months ago
What if you were to use high alkaline Kangen water to dissolve the minerals? Would this work?
There is a 11.5 water for degreasing and a 2.5 acid water for disinfecting. Micro-clustered water. There is a 8.5, 9.0 and 9.5 for drinking. High electron water. Could you use this water for the production of ormus?
spiritprofessor 2 years ago
great suggestion!
AARTA2012 1 year ago
I accidentally removed a recent comment instead of replying. Although the feedback was not constructive the comments were valid. I mention in the video you can use just about any kind of container. In fact you can't, you should use a non lye reacting container like glass.
hohcells 2 years ago
thats rather a caustic finished solution-shouldnt it be neutralized?
m3sca1 2 years ago
The final mix is rinsed in fresh water 3 times to neutralize. The final pH of the Ormus is 9.9
hohcells 2 years ago
@hohcells could you explain how to rinse it please? im slightly confused. thank you so much for making this video!
rauchensietopf 1 year ago
wtf is "ormus" and what is it used for.
delvis11 2 years ago
research white powder gold-its not ormus settling in the water,its mostly magnesium and calcium hydroxide pulling the so called ormus down with the precipitation.
m3sca1 2 years ago