If this was my tractor I would frown on driving it like this. End rows first? Even with the middle streeks you didn't meet up with the end row all the way. There is such a thing as being in to big of a hurry. God forbit if there had been any big rocks out there, you would have ripped the shanks off.
this equipment must get traded every year or two because I have never seen anyone run equipment this fast and just keep on truckin threw the brush seems pretty stupid i run shit like that everyday and would never thing to run it that hard it even hard on an operator to sit in the seat!
bean ground, dont really need to use the disc in fall work. that would be more of a spring job. everything is going under nice it looks like. so it'll be easier for the chisel plow come spring
Tht field is either way to small fort hat tractor, or the tractor is way to big for that field. lol you could use a smaller tractor with smaller discs, like a case 1694 or something similar like that, or a ford 7810. lol
If ya knew what you were talkin about you would know its not a disc its a disc ripper not sure but looks like 8 or 9 shanks there aint a ford on earth that will pull that lol
i like the case ripper. it doesnt look like the front discs are barely even in the ground. thats probablt why it is pulling so easy and plus its just bean stuble
We don't put it all the way down in this small part of the field so we it can turn without having to raise it at every turn this is like 0.05% of the field and the soil composition is a rather loose and does not require that deep of tillage on this part.
you missed a spot
tommyclay 3 months ago
Good example of minimum tillage :D
Westernforce3 5 months ago
that little field is like a little garden for that beautiful giant :) 9530 john deere
fm4040 9 months ago
One word springs to mind... CHEESER!!!
yammyharrone 1 year ago
pig of a driver, why so rough for?
stvna8040 1 year ago
@stvna8040 hes an idiot .. he work the end of and made ruts to bounce across... dumb ass should have done them last..
chrsmcwtrs 3 months ago
If this was my tractor I would frown on driving it like this. End rows first? Even with the middle streeks you didn't meet up with the end row all the way. There is such a thing as being in to big of a hurry. God forbit if there had been any big rocks out there, you would have ripped the shanks off.
sp00ktube 1 year ago
i tihnk that machine would have done fine with 4 wheels and a nice kholer motor (:
xxbal1inxx 1 year ago
this equipment must get traded every year or two because I have never seen anyone run equipment this fast and just keep on truckin threw the brush seems pretty stupid i run shit like that everyday and would never thing to run it that hard it even hard on an operator to sit in the seat!
sledneck442 1 year ago
This has been flagged as spam show
a product of too much money, and don't know what to do whit them;)
Egglingen 1 year ago
Way too big a tractor for that little field... must be the chapter president for the "More Money Than Brains" club.
CragarShinoda 1 year ago
Comment removed
sp00ktube 1 year ago
Its a 475hp tractor
generationll 1 year ago
Too much equipment for such a small area.
okbuilder 2 years ago 13
No doubt.
ureonmyhitlist 1 year ago
bean ground, dont really need to use the disc in fall work. that would be more of a spring job. everything is going under nice it looks like. so it'll be easier for the chisel plow come spring
robert91chevy 2 years ago
They rotated the crop this year, they had a good crop of corn for 09 off this plot though.
GaaraHunter101 2 years ago
thats why there disc ripping not discing
nchayfarmer 2 years ago
hhn
GeisonAisenberg 2 years ago
He needs to set that thing right. The discs aren't even set down.
TheCitationXman 2 years ago
he is ripping it with a disc ripper thats why they arent down all he needsa to do is push the hydrolic lever and everything will go down
dirtbikerboy202 2 years ago
and left a big strip
manganbmx 2 years ago
why plow the outside first?
manganbmx 2 years ago
and whoever is driving, is driving like a tit! lol
jd8430t 2 years ago
Like a toy?
GaaraHunter101 2 years ago
i think he meant tit, boob, idiot,etc; usually you plow the headlands or outside strip, last. cool video tho!
salamander27001 2 years ago
Tht field is either way to small fort hat tractor, or the tractor is way to big for that field. lol you could use a smaller tractor with smaller discs, like a case 1694 or something similar like that, or a ford 7810. lol
jd8430t 2 years ago
If ya knew what you were talkin about you would know its not a disc its a disc ripper not sure but looks like 8 or 9 shanks there aint a ford on earth that will pull that lol
nchayfarmer 2 years ago 3
i sorta think that the 9000 series is stupidly huge. but also stupidly awesome
nevbot222 2 years ago
wow.. Fast.
HighSpeedRider 2 years ago
i reckon the reason y he has driven around the outside of the paddock is so he can map it 4 the gps
newson7248 2 years ago 2
you're probably right, but i only think you have to do it once in a lifetime, or until the coumputer crashes
eyeced209 2 years ago
Comment removed
ihatetractors1 2 years ago
can i have "borrow" it
greenarcticcat400 2 years ago
i have a ? why do you do you ends 1st bc you are just running back over it packing it again
clarkbarjr 2 years ago
There is a 9530 sitting on a John Deere dealer's lot in Williamsport,Indiana
generationll 2 years ago
what is that like 120-150k?
ribz78 2 years ago
About double that ribz
generationll 2 years ago
depeds if u get auto steer
jkauffman990 2 years ago
could be more, case's high end tractor all decked out is over 500k
ThankGodImCountryBoy 2 years ago
no it aint its around 300 and its bigger than a 9630
Dragotec 2 years ago
Depends on the year say a 2008 with low low only 240 hrs is going for 240k but yes maybe 160 k for like an older one
PrimitiveStrikeForce 2 years ago
that field just got pwned in like 5mins..
djad54 2 years ago 6
i thought u only put those down when u have big clods???
manganbmx 2 years ago
i like the case ripper. it doesnt look like the front discs are barely even in the ground. thats probablt why it is pulling so easy and plus its just bean stuble
kinser7220 3 years ago
How many hp got this John Deere?
priher18 3 years ago
If I am correct it is about 470 horse .
GaaraHunter101 3 years ago
i think u need a bigger cultivation machine than tht, 9530's just toying with tht machine.
johndeere8030 3 years ago
diesér jonny is einfach nur hammer!!!
checkerfan 3 years ago
??? English? jw
GaaraHunter101 3 years ago
He said this Johnny is just amazing.
americanstylefreak 2 years ago
Thanks, the bigger the better!
GaaraHunter101 2 years ago
That'S right...
This's my dream tractor...
americanstylefreak 2 years ago
ładnie zapierdala///
880331877 3 years ago
??? Eng please. :)
GaaraHunter101 3 years ago
popieram kolege nieżle wymiata sprzęt :) nice video 5/5 :) I live John Deere
kalus777 3 years ago
Cool! :) Thanks!
GaaraHunter101 3 years ago
He's missed a bit!
owaingibby 3 years ago
yea, well when you the the farm is close to 6,000 acres whats a 12 x 250 foot spot of untilled field. lol
GaaraHunter101 3 years ago
We don't put it all the way down in this small part of the field so we it can turn without having to raise it at every turn this is like 0.05% of the field and the soil composition is a rather loose and does not require that deep of tillage on this part.
GaaraHunter101 3 years ago
why doesn't he have the front disk gangs in the ground?
dleinart 3 years ago
wheres ur challanger?
DionysiosA76 3 years ago
It got traded in for this and I cant find the vid on the old computer was taken in to be frag, clean, or what the @#$% they did to it sorry. :(
GaaraHunter101 3 years ago