We have never had a problem with the center holes of the Quick-Lock weight plates wearing. The paint will get worn down with use, but mechanically there should be no issues. The locking screw threads are not signficantly harder than the cast iron plates. If anythng does go wrong after years of use, you are still covered by our Lifetime Warranty. Stay Strong!
I'd like to see Ironmasterpro comment on what one of the poster brought up - that is, with the regular weight changes the locking screws will grind at the inner holes and cause the plates to become loose, through creating gouges. I wonder just how much of an issue this is really going to be - I do have the full set of Quick-locks dumbbells (up to 120 lbs). Thanks.
When I say most, it suggest a normal bell curve and two standard deviations from the mean engulfing 95% of needs. Brings me back to the point of practicality and efficiency--things that ARE on the mind of a thoughtful consumer (helps make decisions).
@lazur1 you just like the sound of your voice? :) I'm not sure that this was in my address--it looks like you just wanted to share. In any case. There is a reason why gradations of LESS than 5lb are only offered in smaller dumbbells. For most purposes making smaller increments is ridiculous.
In order to make one dumbbell heavier than 75 lbs, you would need to have the longer locking screws. They come with the 120 lb Add on Kit or are available separately. If you got two long locking screws with your 75 lb set, you could do it.
I have a pair of ironmasters and can say it's not really a locking mechanism. It's more of a screw in system like a nut & bolt. I'm not sure if warranty covers it if it gets loose, but I've had the ironmasters for two years now and it hasn't gotten loose yet.
Good question. The Ironmaster Quick-Lock Dumbbells are better than Spinlocks because: 1) They don't have long handle ends sticking out. Much more compact and less awkward and you can set them on end like on your knees. 2) The patented locking mechanism prevents them from loosening during use making them safer. 3) Weight changes are not instant, but much quicker than spin locks. 4) Includes the dumbbell stand which helps a lot in terms of weight changes and storage.
And these weight plates are the same ones you can use with your Quick Lock Kettlebell system, right? (Just making sure they're interchangeable and identical.)
Absolutely. You can drop these dumbbells on the floor. They are iron and steel and very heavy duty. If you have any issues, the lifetime warranty will cover you. Thanks~Ironmaster.
titan adjustables are too expensive, and I wouldn't use dumbbells that have moving parts. I have a pair of powerblocks and ironmasters, and I think the two of them are about the same. Powerblocks takes me about 2 seconds to change weights. Ironmasters takes me about 8 seconds. The only problem with powerblocks is that it feels weird, you can't do wrist exercises with it, and it makes a lot of noise clanking around. Either one is a good buy though.
The problem with all the weight changes (which you'll perform regularly) is that the inner surface of the holes will wear out over time. Mine already has the paint chipped off and some gouges. The teeth grind at the holes. Just one thing to keep in mind.
The slowest of the "quick-change" DBs, but by far the best. They lock up as soiidly as the finest solid DBs. don;t be obsessed with speed: The plate changes are fast enough for any work-rest scheme,& if you're stripping weights with no breaks, even Powerblocks aren't quick enough.
@Dellaphobe Powerblocks are horrible for explosives moves. The rattling noise they make doesn't make you feel feel safe when a big loose-sounding weight is swinging over your head.
@lazur1 I have to disagree. I Have been using the new urithane powerblocks for a few months now and they make little to no rattle. I have had more noise come from the weights at professional gyms.
@D Haven't touched PBDBs in 10yrs. I'll take your word urethane dampens rattling. From photos, it seems the design is the same, so some shifting must occur, which'd bother me, even quieted. In any case, old PBs suck. Every gym i've attended had solid DBs exclusively. Can't imagine a noise they'd make, unless dropped. Not enough space for all the things that bug me about (the old) PBDBs, but if they work for everything you use them for, it doesn't matter.
Good question: It is true that having one extra 2.5 lb plate on one side is not perfectly symetrical, however, there is plenty of room in the handle grip to move your hand a little closer to the heavier end and it will be balanced in your hand. You can even do this with an extra 5 lb plate on one side.
@davidpenwell1987 that's a very odd question to ask. I have been working out for about 10 years and the ONLY situation that warrants 2.5lb increments is a shoulder workout.
With that said, you have two solutions. (1) Rent an apartment with an extra room for a home gym and buy a full dumbbell rack :)
(2) when you hit comfortable form at 10lb. Increase volume for a few weeks. Then lower volume and go to 15lb
bonus solution: work with a dumbbell that is not perfectly balanced (only for shoulders)
@emil3m1 how was that an odd question when i even got a correct answer from the dude about it? if you watch the video and read my question you will understand what i am speaking of. dont just read my question it wouldnt make sense. thats why the poster of the video was able to answer me and not you bc he knows what he said during the video. 2.5lb increases. he even answered my question lol
@emil3m1 Check out "Fractional Plates". Many trainees have times when better progress is made by slightly increasing loads with plates much less than 2.5. They're not felt as making the bell noticeably heavier, a way to get past plateaus. Usually the trainee begins by using a -lower- weight then previously. They accumulate, ounce by ounce, workout to workout, into an increase in strength that wasn't forthcoming with larger single jumps in weight.
@lazur1 you know that there is a million programs out there. The program you reference to is not a standard. You can ask me if having more gradation is better than having no gradation and I will say yes. Just like having a summer car and winter car is better than simply switching tires :)
We are talking about a home gym here. Not sure that making 1.25lb plates is efficient.
@e:I don't undertand:1/Does the # of available programs affect workability of this idea? 2/This isn't a program. It's a way to break plateaus. It can be used in any program. It does work. 3/You seem to agree w/me by your 3rd sentence. 4/They are already being made; have been for years. 5/The efficiency of making them isn't an issue for the end user. 5/Home gyms are exactly where you'd more likely put fractional plates, (or washers, for that matter),on your dumbbells.
@ePt2:(Pardon previous typos & mis-#-ing). 6(cont.) / A/ Home gym's more likely to have inaccurate weights. Fractional plates can correct this. B/ Home gym's where adjustable DBs are. Commercial gyms' DBs have always been solid, in my experience. C/ Home gyms allow tinkering, & leaving results in place. Even if possible, commercial facilities frown on adding your own plates , & in any case, you'd have to remove them from the premises when you finished.
This looks like a quality product. This seems much more practical than the other adjustable dumbbell systems I've researched. A bit expensive but worth the cost I would think. I would like to see a display in a store to try them out first but I'm practically sold.
From the review the weight is not stated as advertised. For example the 5 lb weight weight only at 4.5 lb, 75 pound set is off by 6 to 7 lbs. Some accuracy tolerrance is there.
This problem still occur ??. the ironmaster site stated Most dumbbells will be within 3-4% of the stated weight. Is there any progress in improving the weight tolerance. would like to know and also for ironmaster lover also would like to know?
I just purchased these weights a few weeks ago and was also curious with the weight accuracy. The weights are within 3-4 % . One weighed 72.2 lbs. and the other weighed 71.6 lbs. Right now, I have them at 35 pounds for curls, but they weigh 33.6 lbs each. Some plates will be closer to 5 pounds than others by less than half a pound or less. I haven't bought the extended weight for the 120 pound add on to see how accurate it is. My next purchase will be the bench.
There is a great video from Muscle and Fitness showing some heavy DB presses on the muscle and fitness web site. Search their videos for Raw! #23 Dumbbell Tips.
How safe are those dumbbells? Can they accidentally unscrew or loosen if someone had them sitting on their lap before doing a set and they were to twist them while on their lap? I know some people who do that with regular dumbbells to psyche themselves up before doing a heavy set. Can you show an example of someone doing that? The weights would be sitting vertical on their lap while someone is holding them in each hand while sitting down as to anticipate doing a set.
I just got the Powerblocks 9.0 Stage I, it was either them or the Bowflex. I wanted a more compact design. The ironmasters look pretty cool, but they're not that different from regular spin on type adjustables. Also when I'm doing a workout I don't have the time to stop and think about how much weight I need to take off, simple math can be annoying at times. Also taking off the plates seems like a bit of a hassle. But they are a good alternative.
The Ironmaster dumbbells are the best I've ever used, but they're not really that "quick changing." And if you buy them used, if something ever goes wrong, you're screwed. You might as well sell them on Craigslist. Nothing is covered if you're not the original registered owner.
These are nice dumbbells. Better than powerblock or selecttech. The only adjustable dumbbells that I have found that are better are the Titans. Doing P90X you have to switch fast and the Titans are the fastest, tightest switching adjustable dumbells on the market.
Okay, thanks man. I might go with the iron masters. Actually, you get 10 lbs. more with the powerblocks, because the ironmasters go up to 120 lbs. HOWEVER, I saw on ironmaster's website that they have a custom, made to order, add on kit that allows each dumbell to go up to 165 lbs!!! Now if that's not enough weight, then I don't know what is. The only problem that I hear about the ironmasters is that they take much longer to change weights than other adjustable dumbbells.
@jreily88 i was thinking the same thing, but after a month or 2 im thinking i might just order 2 more dumbell handles along with the extension kit... have 4 dumbbells ready to go
These can take more abuse than the powerblock and select techs, aswell as having more weight than the select tech, though price wise with the stand they probably are cheaper, but i'm not sure.
All the dumbbells they have out there(weilder, powerblock, bowflex etc.....) i would have to choose the ironmaster, but damn, there so fucking expensive lol!
These are easily the best dumbbells I have ever used. In fact, I prefer them to fixed DBs because they're much more compact, feel the same as fixed DBs, but have an incredibly tiny footprint when matched with the stand and Super Bench.
But what's this about kettlebells??? Where can I see the prototype?
Good question. There are many advantages but there are the top three. The Ironmaster QLDBs have patented quick release locking screws that allows much faster weight changes than with old school spin lock handles. There is no long handle sticking out the ends so you can rest them on your knees and have a very compact size. The design also prevents the plates from loosening up so they stay nice and tight.
Great question. We are getting close to having the Ironmaster Quick-Lock Kettbell handles ready. The target release date is July. We will announce it in our email newsletter so keep a look out.
Why did I get a SuperBench with a white frame when I ordered last year? The benches all look gray now. Plus, I ordered the pull-up bar, sit up attachment, and dip bar, all of which work great.
The Ironmaster equipment frame colors transitioned from white to dark grey a little over a year ago. Nothing but the color changed. Glad you like the gear!
The stand does not have wheels. It would not be 100% safe to roll around since the foot print is so small and there is a lot of weight up high. I heard of some users who added a wider roller frame underneath like used for wood shop tools though.
From the reviews I read on Amazon and other forums, these seem like the best on the market, but does the stand have wheels on the bottom for easy transport?
We have never had a problem with the center holes of the Quick-Lock weight plates wearing. The paint will get worn down with use, but mechanically there should be no issues. The locking screw threads are not signficantly harder than the cast iron plates. If anythng does go wrong after years of use, you are still covered by our Lifetime Warranty. Stay Strong!
IronmasterPro 1 month ago
I'd like to see Ironmasterpro comment on what one of the poster brought up - that is, with the regular weight changes the locking screws will grind at the inner holes and cause the plates to become loose, through creating gouges. I wonder just how much of an issue this is really going to be - I do have the full set of Quick-locks dumbbells (up to 120 lbs). Thanks.
chipdouglas35 1 month ago
When I say most, it suggest a normal bell curve and two standard deviations from the mean engulfing 95% of needs. Brings me back to the point of practicality and efficiency--things that ARE on the mind of a thoughtful consumer (helps make decisions).
emil3m1 3 months ago
@lazur1 you just like the sound of your voice? :) I'm not sure that this was in my address--it looks like you just wanted to share. In any case. There is a reason why gradations of LESS than 5lb are only offered in smaller dumbbells. For most purposes making smaller increments is ridiculous.
emil3m1 3 months ago
2 protocols need faster changes than IMs are capable of: Stripping Sets & Pyramid Sets, & NO DBs change fast enough to do those properly.
lazur1 3 months ago
In order to make one dumbbell heavier than 75 lbs, you would need to have the longer locking screws. They come with the 120 lb Add on Kit or are available separately. If you got two long locking screws with your 75 lb set, you could do it.
IronmasterPro 3 months ago
If you have the 75 pound kit, can you put like 100 pound worth of the plates to make one really heavy dumbell, like for heavy db rpws?
Swag4567 3 months ago
@Swag4567 If too many plates are added, the locking-screws won't go far enough into the handle to be secure. Get the optional longer locking screws.
lazur1 3 months ago
These look like the best adjustable dumbells, imo...
BarefootArizona 3 months ago
Yes, the lifetime warranty would cover an issue with the locking mechanism. It covers everything but the finish. Thanks!
IronmasterPro 3 months ago
If the locking mechanism becomes loose over time, will it be covered by the lifetime warranty?
emil3m1 3 months ago
@emil3m1
I have a pair of ironmasters and can say it's not really a locking mechanism. It's more of a screw in system like a nut & bolt. I'm not sure if warranty covers it if it gets loose, but I've had the ironmasters for two years now and it hasn't gotten loose yet.
Anonib 3 months ago
Good question. The Ironmaster Quick-Lock Dumbbells are better than Spinlocks because: 1) They don't have long handle ends sticking out. Much more compact and less awkward and you can set them on end like on your knees. 2) The patented locking mechanism prevents them from loosening during use making them safer. 3) Weight changes are not instant, but much quicker than spin locks. 4) Includes the dumbbell stand which helps a lot in terms of weight changes and storage.
IronmasterPro 5 months ago
What makes these better than spindle-lock dumbbells?
ThePaulWog 5 months ago
Comment removed
Anonib 3 months ago
Yes, the Quick-Lock plates fit the Dumbbells AND the Kettlebells we make. They both use the same plates and locking screws.
IronmasterPro 7 months ago
And these weight plates are the same ones you can use with your Quick Lock Kettlebell system, right? (Just making sure they're interchangeable and identical.)
pnutbutrncrackers 7 months ago
Absolutely. You can drop these dumbbells on the floor. They are iron and steel and very heavy duty. If you have any issues, the lifetime warranty will cover you. Thanks~Ironmaster.
IronmasterPro 8 months ago
Is the lifetime warranty still valid if i drop them? I have 3/4" rubber flooring.
sidhucer00789 8 months ago
power blocks or titan adjustables are 10000x better
ijustwant007007 8 months ago
@ijustwant007007
titan adjustables are too expensive, and I wouldn't use dumbbells that have moving parts. I have a pair of powerblocks and ironmasters, and I think the two of them are about the same. Powerblocks takes me about 2 seconds to change weights. Ironmasters takes me about 8 seconds. The only problem with powerblocks is that it feels weird, you can't do wrist exercises with it, and it makes a lot of noise clanking around. Either one is a good buy though.
Anonib 3 months ago
The problem with all the weight changes (which you'll perform regularly) is that the inner surface of the holes will wear out over time. Mine already has the paint chipped off and some gouges. The teeth grind at the holes. Just one thing to keep in mind.
iRonlMoNKleY 11 months ago 2
The slowest of the "quick-change" DBs, but by far the best. They lock up as soiidly as the finest solid DBs. don;t be obsessed with speed: The plate changes are fast enough for any work-rest scheme,& if you're stripping weights with no breaks, even Powerblocks aren't quick enough.
lazur1 11 months ago
Comment removed
soundofmetal 1 year ago
I say powerblocks are better
Dellaphobe 1 year ago
@Dellaphobe Powerblocks are horrible for explosives moves. The rattling noise they make doesn't make you feel feel safe when a big loose-sounding weight is swinging over your head.
lazur1 11 months ago
@lazur1 I have to disagree. I Have been using the new urithane powerblocks for a few months now and they make little to no rattle. I have had more noise come from the weights at professional gyms.
Dellaphobe 11 months ago
@D Haven't touched PBDBs in 10yrs. I'll take your word urethane dampens rattling. From photos, it seems the design is the same, so some shifting must occur, which'd bother me, even quieted. In any case, old PBs suck. Every gym i've attended had solid DBs exclusively. Can't imagine a noise they'd make, unless dropped. Not enough space for all the things that bug me about (the old) PBDBs, but if they work for everything you use them for, it doesn't matter.
lazur1 11 months ago
@lazur1 True, as long as the weight you or I uses works for us, then that is all that matters : )
Dellaphobe 11 months ago
This is good stuff people.
NejiKusa 1 year ago
Are the weight plates rubber coated on the sides
65impact 1 year ago
@65impact
no they are not. all iron.
soundofmetal 1 year ago
how can they be perfectly balanced if i only add 2.5 lbs to one side and not the other?
davidpenwell1987 1 year ago 6
Good question: It is true that having one extra 2.5 lb plate on one side is not perfectly symetrical, however, there is plenty of room in the handle grip to move your hand a little closer to the heavier end and it will be balanced in your hand. You can even do this with an extra 5 lb plate on one side.
IronmasterPro 1 year ago
what is the handle length of the dumbbells so i can test that on a set of another brand dumbbells i have?
davidpenwell1987 1 year ago
The QLDB handle is 6.5" wide inside the backing plates.
IronmasterPro 1 year ago
@davidpenwell1987 that's a very odd question to ask. I have been working out for about 10 years and the ONLY situation that warrants 2.5lb increments is a shoulder workout.
With that said, you have two solutions. (1) Rent an apartment with an extra room for a home gym and buy a full dumbbell rack :)
(2) when you hit comfortable form at 10lb. Increase volume for a few weeks. Then lower volume and go to 15lb
bonus solution: work with a dumbbell that is not perfectly balanced (only for shoulders)
emil3m1 3 months ago
@emil3m1 how was that an odd question when i even got a correct answer from the dude about it? if you watch the video and read my question you will understand what i am speaking of. dont just read my question it wouldnt make sense. thats why the poster of the video was able to answer me and not you bc he knows what he said during the video. 2.5lb increases. he even answered my question lol
davidpenwell1987 3 months ago
@emil3m1 Check out "Fractional Plates". Many trainees have times when better progress is made by slightly increasing loads with plates much less than 2.5. They're not felt as making the bell noticeably heavier, a way to get past plateaus. Usually the trainee begins by using a -lower- weight then previously. They accumulate, ounce by ounce, workout to workout, into an increase in strength that wasn't forthcoming with larger single jumps in weight.
lazur1 3 months ago
@lazur1 you know that there is a million programs out there. The program you reference to is not a standard. You can ask me if having more gradation is better than having no gradation and I will say yes. Just like having a summer car and winter car is better than simply switching tires :)
We are talking about a home gym here. Not sure that making 1.25lb plates is efficient.
Ironmaster, any thoughts?
emil3m1 3 months ago
@e:I don't undertand:1/Does the # of available programs affect workability of this idea? 2/This isn't a program. It's a way to break plateaus. It can be used in any program. It does work. 3/You seem to agree w/me by your 3rd sentence. 4/They are already being made; have been for years. 5/The efficiency of making them isn't an issue for the end user. 5/Home gyms are exactly where you'd more likely put fractional plates, (or washers, for that matter),on your dumbbells.
lazur1 3 months ago
@ePt2:(Pardon previous typos & mis-#-ing). 6(cont.) / A/ Home gym's more likely to have inaccurate weights. Fractional plates can correct this. B/ Home gym's where adjustable DBs are. Commercial gyms' DBs have always been solid, in my experience. C/ Home gyms allow tinkering, & leaving results in place. Even if possible, commercial facilities frown on adding your own plates , & in any case, you'd have to remove them from the premises when you finished.
lazur1 3 months ago
Ok I've done my research. I'm buying now.
hobbsbd822 1 year ago
This looks like a quality product. This seems much more practical than the other adjustable dumbbell systems I've researched. A bit expensive but worth the cost I would think. I would like to see a display in a store to try them out first but I'm practically sold.
hobbsbd822 1 year ago
man I got spring clamps for like 3 dollars each, work great.
mako7828 1 year ago
From the review the weight is not stated as advertised. For example the 5 lb weight weight only at 4.5 lb, 75 pound set is off by 6 to 7 lbs. Some accuracy tolerrance is there.
This problem still occur ??. the ironmaster site stated Most dumbbells will be within 3-4% of the stated weight. Is there any progress in improving the weight tolerance. would like to know and also for ironmaster lover also would like to know?
calvinho1111 1 year ago
@calvinho1111
I just purchased these weights a few weeks ago and was also curious with the weight accuracy. The weights are within 3-4 % . One weighed 72.2 lbs. and the other weighed 71.6 lbs. Right now, I have them at 35 pounds for curls, but they weigh 33.6 lbs each. Some plates will be closer to 5 pounds than others by less than half a pound or less. I haven't bought the extended weight for the 120 pound add on to see how accurate it is. My next purchase will be the bench.
soundofmetal 1 year ago
Comment removed
coollguy100 1 year ago
@soundofmetal
keep posting the upate pls.
coollguy100 1 year ago
Hmm this could be more up my alley than the powerblocks. They seem to be a bit creaky and unstable (the powerblocks).
HowAboutSomeTruth1 1 year ago
There is a great video from Muscle and Fitness showing some heavy DB presses on the muscle and fitness web site. Search their videos for Raw! #23 Dumbbell Tips.
IronmasterPro 1 year ago
How safe are those dumbbells? Can they accidentally unscrew or loosen if someone had them sitting on their lap before doing a set and they were to twist them while on their lap? I know some people who do that with regular dumbbells to psyche themselves up before doing a heavy set. Can you show an example of someone doing that? The weights would be sitting vertical on their lap while someone is holding them in each hand while sitting down as to anticipate doing a set.
soundofmetal 1 year ago
I just got the Powerblocks 9.0 Stage I, it was either them or the Bowflex. I wanted a more compact design. The ironmasters look pretty cool, but they're not that different from regular spin on type adjustables. Also when I'm doing a workout I don't have the time to stop and think about how much weight I need to take off, simple math can be annoying at times. Also taking off the plates seems like a bit of a hassle. But they are a good alternative.
mrjost55 2 years ago
The Ironmaster dumbbells are the best I've ever used, but they're not really that "quick changing." And if you buy them used, if something ever goes wrong, you're screwed. You might as well sell them on Craigslist. Nothing is covered if you're not the original registered owner.
bosszeroboss 2 years ago
they do look more sturdy than the other system but the time it takes to adjust the weight is not fast enough for drop sets.
ivantoxie 2 years ago
These are nice dumbbells. Better than powerblock or selecttech. The only adjustable dumbbells that I have found that are better are the Titans. Doing P90X you have to switch fast and the Titans are the fastest, tightest switching adjustable dumbells on the market.
bbernhar2000 2 years ago
Yeah, but the main benefit that the powerblocks have over any other is that they have the heaviest weight sets available.
jreily88 2 years ago
I just checked into that. Here's the comparison from both websites...
Powerblock Sport 9.0 Stage III(130lbs per hand), no stand: $897 + $99 S/H = 996
Ironmaster DB Set, stand included + Add ons(125lbs. per hand): $688 + $120 S/H = $808
If you got Powerblocks, you only get 5 more pounds, no stand, for $188 more. Doesn't seem worth it, wouldn't you say?
deek77 2 years ago
Okay, thanks man. I might go with the iron masters. Actually, you get 10 lbs. more with the powerblocks, because the ironmasters go up to 120 lbs. HOWEVER, I saw on ironmaster's website that they have a custom, made to order, add on kit that allows each dumbell to go up to 165 lbs!!! Now if that's not enough weight, then I don't know what is. The only problem that I hear about the ironmasters is that they take much longer to change weights than other adjustable dumbbells.
jreily88 2 years ago
@jreily88 i was thinking the same thing, but after a month or 2 im thinking i might just order 2 more dumbell handles along with the extension kit... have 4 dumbbells ready to go
Food4theEars 2 years ago
That's cool. I've already gotten a membership to my gym by the way.
jreily88 2 years ago
@deek77 Yea, but you need to pull the plates off, witch sucks!
4inches4u 1 year ago
These can take more abuse than the powerblock and select techs, aswell as having more weight than the select tech, though price wise with the stand they probably are cheaper, but i'm not sure.
UltimateHibz 2 years ago
This comment has received too many negative votes show
Just get dumbbells, quick and simple.
JoshCCFC09 2 years ago
and expensive
mrjost55 2 years ago
probs get the powerblock set, but these look pretty solid and convincing.
Dstrt80 2 years ago
All the dumbbells they have out there(weilder, powerblock, bowflex etc.....) i would have to choose the ironmaster, but damn, there so fucking expensive lol!
bordelon1111 2 years ago
During performance, are the dumbells snug, mediocre, or loose/shakey?
Any witnesses?
adidasNsparq 2 years ago
I dont know, but when did normal standard dumbells shake or break when dropping? These Ironmasters and powerblocks just dont seem worth the money.
JoshCCFC09 2 years ago
These are easily the best dumbbells I have ever used. In fact, I prefer them to fixed DBs because they're much more compact, feel the same as fixed DBs, but have an incredibly tiny footprint when matched with the stand and Super Bench.
But what's this about kettlebells??? Where can I see the prototype?
bosszeroboss 2 years ago
Good question. There are many advantages but there are the top three. The Ironmaster QLDBs have patented quick release locking screws that allows much faster weight changes than with old school spin lock handles. There is no long handle sticking out the ends so you can rest them on your knees and have a very compact size. The design also prevents the plates from loosening up so they stay nice and tight.
IronmasterPro 2 years ago
what is the difference between the iron master dumbells and tradtitional spin lock dumbells?
amirshazad 2 years ago
Any word on when the Ironmaster Kettlebell will be available?
69landshark 2 years ago
Great question. We are getting close to having the Ironmaster Quick-Lock Kettbell handles ready. The target release date is July. We will announce it in our email newsletter so keep a look out.
IronmasterPro 2 years ago
Why did I get a SuperBench with a white frame when I ordered last year? The benches all look gray now. Plus, I ordered the pull-up bar, sit up attachment, and dip bar, all of which work great.
bosszeroboss 2 years ago
The Ironmaster equipment frame colors transitioned from white to dark grey a little over a year ago. Nothing but the color changed. Glad you like the gear!
IronmasterPro 2 years ago
The stand does not have wheels. It would not be 100% safe to roll around since the foot print is so small and there is a lot of weight up high. I heard of some users who added a wider roller frame underneath like used for wood shop tools though.
IronmasterPro 3 years ago
From the reviews I read on Amazon and other forums, these seem like the best on the market, but does the stand have wheels on the bottom for easy transport?
truthspeaks84 3 years ago