And there are zero signs of forced entry! This will leave the safe owner scratching their head. Good demo to help safe owners look for flaws in their equipment.
I'm just saying, break into my house, and have your prayers already over with. How many criminals would break into houses knowing they are probably about to face a loaded gun and their life will soon be over? Not very many.
@AClarke2007 Nobody's life is worth a little junk. I still stand by the fact that there would be less crime if criminals knew they would face a loaded gun when breaking and entering. As far as protecting junk goes, I wouldn't be willing to take a life over it. But, if someone is breaking into your house, you wouldn't just be protecting your junk, you would be protecting yourself and maybe a family if you had one. Protecting that would be a no brainier.
people that break into houses look for houses that would have guns and stuff thats easy to sell on the street trust me i was a drug adict for years and at bad time was never thinking about living or dieing just did what i did to get money many people look for the hard working crazy american to rob they know who to go for and its not hard to get away if a thief wants something he will get it
most of the electronic safe wear you have an hiden key behind a label near the elektronics. you can shake the safe a bit and pul on the door. if you do it richt the door wil go open with an ease :p and i know. i quite often ferget to change bateries in a few safes and olway's loze my key :p so yeah its easy :p
depressing and pathetic that a safe manufacturer would make it that easy to break into one of its products...another safe to steer clear of methinks... thanks for posting
Unless this safe has an incredibly shitty design from the factory, the motor wiring has been moved to pass by or through the skeleton key override (that plate on the front). If you try this method with a Challenger safe, the only thing you're going to accomplish is hanging the paper clip in lock mechanism. The motor wiring is no where close by, and is zip-tied so there is almost no slack in it, ergo you couldn't pull it out through the skeleton keyhole.
ingenious. How'd you figure this out? diagram of the safe showed you wire near that (seemingly useless) hole? And Track, All you're doing is using the bent paperclip to grab the wire and pull it out so you can manipulate it.
why do you show it?
sniperRobert 4 months ago
you are a pro cracker
ongchorcool 9 months ago
Try to do that with the CHALLENGER SAFE!!!
You can't!! Because the battery wires are behind the lock mechanism and not in front!!
GUALLACOL 10 months ago
i know your password, but I don't tell it :P
molltophil 11 months ago
And there are zero signs of forced entry! This will leave the safe owner scratching their head. Good demo to help safe owners look for flaws in their equipment.
14goldmedals 1 year ago
cant you just take the safe and run?
gasdorf 1 year ago
hrrrm
MockEmpire 1 year ago
for any of these safes their is an easyer way, it requires no tools aswell
/watch?v=eOdmMb90YEE
alewisgb 1 year ago 2
Thats cool heres my way:
watch?v=Fd_edk_nB70
doyadirt 1 year ago
lol wow fail safe!
PersonguydudeWB 1 year ago
What a useless piece of crap for a safe.
paininthe10 1 year ago
I myself really hope that the law enforcement posted this to catch SORRY-ASS THEIFS !!!!!!
gillespies68 1 year ago
lol what a load of bullshit
trinder1986 2 years ago
get in that with a screwdriver!lol
jasongamage 1 year ago
Glad i Dont own one these punk ass safes otherwisze i might be mad you shown croos and criminals how to opens and steal shit
Jcrazyninja 2 years ago
good luck doing that with a couple of .45acp's in your back when you break into my house...
mosinnagant76 2 years ago 2
douche
eseneaux 2 years ago
fuck it. i don't give a shit. Break into my house and be prepared to suck lead.
mosinnagant76 2 years ago 4
@mosinnagant76 You're so fucking hardcore
myweineriswonderful 2 years ago
@myweineriswonderful. O yea, so hardcore!! I can sense a little sarcasm here...
I'm just saying, break into my house, and have your prayers already over with. How many criminals would break into houses knowing they are probably about to face a loaded gun and their life will soon be over? Not very many.
mosinnagant76 2 years ago 5
@mosinnagant76 Who`s life is worth a little junk?
AClarke2007 1 year ago
@AClarke2007 Nobody's life is worth a little junk. I still stand by the fact that there would be less crime if criminals knew they would face a loaded gun when breaking and entering. As far as protecting junk goes, I wouldn't be willing to take a life over it. But, if someone is breaking into your house, you wouldn't just be protecting your junk, you would be protecting yourself and maybe a family if you had one. Protecting that would be a no brainier.
mosinnagant76 1 year ago
@mosinnagant76 Excuse me sir, but I am watching Macbeth ATM...
AClarke2007 1 year ago
people that break into houses look for houses that would have guns and stuff thats easy to sell on the street trust me i was a drug adict for years and at bad time was never thinking about living or dieing just did what i did to get money many people look for the hard working crazy american to rob they know who to go for and its not hard to get away if a thief wants something he will get it
wifebeater756 7 months ago
a gun only works if you are there to shoot it, if you are not home then they will steal your .45 also.
alliamisdustin 1 year ago 8
you are so amazing dude!! I suggest to tell us how to pick a Sentry safe home/safe. There a bit tricky.
JUD4856 2 years ago
couldnt you just pick the safe lock?
Darakon 2 years ago
OMG they could use at least a impulse motor to make it a lil harder lol
stalkersas 2 years ago
most of the electronic safe wear you have an hiden key behind a label near the elektronics. you can shake the safe a bit and pul on the door. if you do it richt the door wil go open with an ease :p and i know. i quite often ferget to change bateries in a few safes and olway's loze my key :p so yeah its easy :p
AnobisBloodwing 2 years ago
haha priceless
kalzx 2 years ago
Thats hilarious, if your gonna get any sort of mid range safe, you always want it to be analog.
MisterKewlz 2 years ago
This comment has received too many negative votes show
if it works it only works on electric safes... sad cuz ma dads isnt electric :'(
guhuff22 3 years ago
depressing and pathetic that a safe manufacturer would make it that easy to break into one of its products...another safe to steer clear of methinks... thanks for posting
lndac02 3 years ago
This comment has received too many negative votes show
now i can break into my grampas hunting safe (5 rifles, 2 aeg's, and 3 pistols)
Guitarherogod33 3 years ago
no one cares
kconic94 3 years ago
cool. you can shoot yourself now.
aaaah909 2 years ago
hahahaha
JonnyHausberg 2 years ago
is it possible to locate the the motor wiring on a non crappy safe, then drill to it and do this?
anarchy0productions 3 years ago
It all depends on the quality of the safe. The most secure electric safes have failsafes built in that prevent bypassing the lock.
admiralnomad 3 years ago
fake
kadu1986 3 years ago
Why the hell would he even bother posting it if it was fake? Believe in something, would you!
MisterKewlz 2 years ago
Thanx, now i can break into my dad's LOL
sexymisexy 3 years ago
Its a safe to keep honest crooks out. Not a crook with a brain.
DobermansRock 3 years ago
one bag of popcorn.....beep...beep-beep.....and wall-laa.....
fstwrtr 3 years ago
idiots who put the negaties that joke was funny
mingash90 3 years ago
you could also pick the lock if u don't have a battery.
P.S. sounds like a microwave
hendrixmyidol 3 years ago
Unless this safe has an incredibly shitty design from the factory, the motor wiring has been moved to pass by or through the skeleton key override (that plate on the front). If you try this method with a Challenger safe, the only thing you're going to accomplish is hanging the paper clip in lock mechanism. The motor wiring is no where close by, and is zip-tied so there is almost no slack in it, ergo you couldn't pull it out through the skeleton keyhole.
redant51 4 years ago
awesome idea *****
hendrixmyidol 4 years ago
Lol, It's a good thing I own a Fort Knox Titan, instead of one of these pieces of crap.
xzavierwebster 4 years ago
i dont think u can find a safe with a fu**ing nail comes out in the front
bullshi*
this vdio is tooooooooo OLD!
badr1407 4 years ago
Awesome video
wrt55 4 years ago
This was also performed on Italian Job (2003). INGENIOUS I'll take it your a professional safe cracker?
xtremedude100 4 years ago
pwned
soker333 4 years ago
slick
mysticpig 5 years ago
ingenious. How'd you figure this out? diagram of the safe showed you wire near that (seemingly useless) hole? And Track, All you're doing is using the bent paperclip to grab the wire and pull it out so you can manipulate it.
ilovebitchcakes 5 years ago
I dont get what i have to do with the paper clip..
Track607 5 years ago
you just use it to pull out a cable for the motor
watchoutyoursafe 5 years ago
How am i supposed to do that?
Track607 5 years ago