Tokyo Marui VSR-10 disassembly

[MasterOfCeremonyAliB]

What happens if you do loose both those white things

[exolt1357]

the back of my cylinder came of along with the thing that the bolt hooks onto how do i get it back on!!!!!!!!!!!!!!!!!!!!!!!! help me please

[FlameOdyssey]

My VSR-10 bolt will not lock back, such as i cannot fire it. i have a weird spring that i do not know where it goes. Please help me!

[hansfausto]

sir, do tm vsr10 has metal sear?

thanks!

[13joethepro]

does the piston that comes with the gun plastic?

[SuperSonicDonk3y]

thanksie :)

[LucasSchaaf]

Hey sir, i hope you can help me, i just got my hands on a second-hand VSR10 G-spec, do you know if i can simply install a M150 spring in it, without ruining the rifle? Its stock right now. Thank you!

[EddyKicksAss]

It's a cylinder, not a piston!

[airsofterjoe]

What is the clone of this gun and how can u tell the difference

[killeralex1]

@burinairsoft You seers might be worn down and it's not catching the piston when you pull the bolt back.

[abeepak1]

How do you remove the bolt from the cylinder? Thanks

[KickinNotZees]

where did you find the scope?

[suthe243]

@KickinNotZees walmart....

[blindMAN219]

@BurninAirsoft pull the bolt back all the way...

[BurinAirsoft]

Hello , I have the airsoft VSR 10 OD Its a clone of the VSR Down to the parts. And my bolt once I go to pull it black Retracts back into the gun without loading a bullet in the barrel or setting the spring to fire. Can anyone tell me what the problem is or point me in the right direction to fix it ?.

[xSpaceMuffinx]

Is the AGM VSR-10 a exsact clone as the Tokyo Marui VSR-10 ?

[swiftyturtle]

Thanks for the guide! I'm planning some upgrades for my vsr-10, and this really gave me some insight into how I should proceed. And thank goodness it was the scope that was $40. I would've been very angry if I had overpaid by $160. :D

[Suomipanzerdiv13]

I do have a problem with my swiss arms SA1 (looks practically identical to the VSR 10). The bolt gets stuck when is pulled back and if you try to push it forward (with care) it will slam back into the reciver without cockin the gun.

The questions are:

Could the dissasebly of my gun be identical to the VSR 10?

Could it be the spring guide thats causing the problem?

[fortgarylionsrule]

bro me and you got the exact same gun if you green then they the same that gun is da tits srry i just watched i luv you man 

[laservader1]

how retarded you have to drill into your rilfe to change the piston!

[harryrockin]

would it be possible to make a wood body for this rifle?

[Wxn30]

Wow, looking at this thing, you'd probably be better off to get the JG BAR-10 if you want to upgrade the internals, other than the internals, the JG BAR-10 is the exact same thing, you wouldn't have to spend even half as much on it either, leaving more room for upgrades.

[Ta1on1]

Do you know the difference of this version and the G-Spec?

[NotedAngellover]

@Ta1on1

The difference is a silencer, where the outer barrel has been shortend, too have same length as the original version, just with the silencer.

That, and that they've put on the bridge for the scope, which doesn't follow the VSR-10 :)

[ingeniereandrea]

The trigger box it's in metal or plastic?

[THECONNMAN2]

whats the difference between this one and the jg one?

[KaosKaptainKenta]

Quality.

[KSILamborghini]

@THECONNMAN2 this one is the original not the clone the jg bar 10 is only good when upgraded

[JDO658]

Can you buy a metal trigger guard, or a new one? cause mines broken.

[WaSSupYo8o8]

im sure you can find a replacement one but im not sure about a metal one

[narutoboyalex]

@JDO658 search zero one airsoft they have a few

[fatdudefoshizzle]

what did he mean by "drill out the piston head"?

[lluuttzz]

unscrewing it

[MadVideos23]

Could some one tell me if the JG BAR 10 scope rails will work with any weavered scope?? Thanks..

[BAMxMARG3RA]

Hey, I Think My Sniper Is Broken because whenever I go to cock the gun, the bolt always blasts forward...Can Anyone HELP!!!!!!

[wittersmusic]

you need to replace the trigger and piston sear

i had same problem, i bought the deepfire sear set and it works like new now :) also their reinforced so if you want to upgrade later you can :)

[BAMxMARG3RA]

I Just Took The Gun Apart and noticed it was the spring guide so im gonna try and get one of those...Thanks!

[DevilMousey]

Dear Video Poster!!

I was told by redwolf to buy a Separate piece of hardware to Install a Bipod!, is this true??

[darknessfalls714]

just but one from airsplat, mine already came put together wit every thing

[DevilMousey]

thanks dude!

[WaSSupYo8o8]

what type of drill bit do you need in order to drill out the cylinder pin so i can uprade?

[taggerung24]

what scope is he using?

[snapywrist]

lying online is baddddd, i ask for one by the irforce and i never get one.

[mnznm]

thanx for the video. you helped me alot to repare my vsr 10 :D

[SuperSniper26]

thanks to your review or the vsr 10 marui clone i could fix mine without having to spend any money. :) thank you.

[theairsoftguy95]

omg dude i need your help so much. if i was to get a 550 fps spring what are all the internal upgrades that i need to get . could you please send me a list. i know i need a zero trigger.

[cheesewheele1014]

dude to do that u would need to spend at least another $400 and after all those upgrades the gun tends to wear down eassily and is very unreliable

[WaSSupYo8o8]

uh no your wrong...if you want to upgrade your gun to shoot at high fps's you will need a piston, spring guide, the spring itself, trigger sear, piston sear, and if you want a new hop up set, and inner barrel, and no you do not need a zero trigger to me it is a waste of money becasue the zero trigger is around 180-200 dollars and all of the parts i told you excluding barrel and hop up set it will come out to around 160-170 dollars...and it will perform FINE

[JDO658]

I'd get the zero trigger as is comes with all the parts, and also, it's a better trigger system, and also has a much lighter weight piston so it will boost the FPS.

[NotedAngellover]

About the zero trigger, that depends on how strong spring you want for the gun. For the strongest, you'll need the zero-trgger.

[Racr4Lyfe]

Best thing to do is upgrade EVERTHING else after that, most at least if you want maximum durability and life.

[ninjalover21]

does anyone know if this also apply's to the agm vsr10?

[an8kyoe]

the agm l96s triggermech can work with the jg bar 10. I am actually using it

[TeppeiTV]

where can you get a stock trigger mech thats not a zero trigger

[FRVSniperNI]

how do you get the thin end cap off the end...(The one you would take out to fit a silencer adaptor)i need to push my barrel out as it is stuck (beacause of the barrel spacers)any help pls!!!! its to thin for the pliars to grip it.

[MagicMoxley]

hi,

can you or someone help me out LODES!

can you measure the cyilander width, lenght and aprox how far the piston sear is up the cyliander or from the spring guide stop to the end of the cyilander,

thanks alot!

[SuperSniper26]

Post a video how to assemble it.

[bemasher]

It's the exact same process in reverse.

[golfingrobert]

wow

[JJKAKEESH]

@SuperSniper26 doeswnt it coem with instructions on how to?

[omega5454]

i have about the same set up. o and my spring guide got loose so i super glued it :)

[4OdySSeus4]

I guess my question is - is there a huge range and accuracy difference between the vsr pdi 6.01 303mm and the vsr pdi 6.01 554mm tightbore. I'm sure the shorter barrel will give me better mobility in field, but if i get the bore up with longer barrel will a have a large increase in range? Or will it be to small of a change to spend extra money?

[4OdySSeus4]

Here are my two set-ups I can't decide between

first set up (g-spec, pdi v trigger, pdi vc cylinder kit, pdi 250 spring, pdi 6.01 tightbore, barrel apacers, firefly hard type bucking, damper kit)

or do the same thing but make everything bore up, through in an L flute barrel/base, and make the tight bore a 554mm 6.01 instead.

obviously the second sounds better, but if i get the same performance and range of a 6.01 554mm tightbore with the 6.01 303mm(regular g-spec length)then I'll save money

[maggot450020289]

wait... do u have to put the piston in a certain way... or just put it in??

[KillingDuke]

Bless you... ^^; good vid!

[sniper1174]

what is diffrent from a muruai and a regular??

[airsoft2000]

how much fps does it shoot?

[ch1m3ch0]

about 300

[ODanddied]

im thinking of getting this.. would you recomend it?

[Quinnstaz]

i have the gun and i say yes get it asap

[ch1m3ch0]

hell ya best

[TripleX223]

(Could you please send me a message with this answer) At which walmart did you find this sniper for 40 dollars. My understandings tell me that Tokio Mauri's go for hundreds of dollarss. (Thanks)

[bemasher]

Sorry to disappoint, the scope by itself was ~$40 at walmart. The gun however is much more.

[FrogoTM]

Handy for helping gun to fit into backbag...

[Perofessor]

They are both the same. Accuracy pn g-spec is a little worse, but it is quieter. Not much of a difference in G-spec accuracy wise though. I like the look of G-spec. You could get the JGBar-10 which is the exact clone of the TM VSR. ITs only like 140 dollars.

[poohead1421]

hi guys, im on precisionairsoft website right now and they have a gun called "TM VSR-10 G SPEC MG315" it is 280 dollars and it comes with a silencer. Does anyone know if that is a good gun, also wat is the difference between that and another one called "TM VSR-10 Pro-Sniper MG310"

The second gun has no silencer and is 230 dollars. Can somebody tell me the difference and if one is better?

Thank you.

[bananabrian121]

hey do you have to assembel when first bought

[vowlesy77]

NO, only the very first step he does, you have to place the two large bits together and screw them in a with a allen wrench

[chairman967]

question: (not related)do you put in the bb's into the speedloader then carry it around and load up the magazine for your gun? Cause i dont have a speedloader and want to know about them.

[kamikazefighta]

u should make another video of you puting everything back in. i hear a lot of guys having problems with not properly installing the trigger assembly. it would also be great if you showed how to swap out the inner barrel and hop-up bucking.

[bemasher]

Getting a response on here will be sluggish at best. I did not perform the dissassembly, i only recorded the video.

I tell my brother about all the comments made on here and when he gets to it he gives me a response to post.

[Coop772]

Great video man, that explained like everything I wanted to know...

[Cgolfsoccerguy]

plz can u guys give me some help my polt pulls back ok but shoots forward and fires, can someone plz give me an explanation? is it a jam?

[kx85isweet]

ur gun is destroyed inside its umm striped so it will slam fire forever

[Cgolfsoccerguy]

lol I found out the problem its the sear not striped from the inside?

[SilentSinX7]

no 1st u have to push the bolt back and push it down.The only reason ur bolt goes forword is because it's connected to the spring

[sportsman61149]

how fast does it shoot?

[haistakaapaskaa]

i think 90m per sec

[zezimaisbest1234]

How do i add the scope please send me post im pretty new at airsoft.

[sportsman61149]

hey i will try to make a video for you ok?

[beanns2]

Its not to difficult just make sure you use a drill press and some way of holding the cylinder down. Also, when drilling... PECK the drill do not try to drill it all at one time.

[Graehme2258]

it was the spring guide i have to replace but i cant get to it

[Graehme2258]

how hard was it to drill out the small pin cuz i need to replace the thing that holds back the spring cuz it has worn out

[Graehme2258]

how hard was it to drill out the

[Perogie1515]

Ok please ignore that last comment. I just need to know what spring to get. Also, is that a good scope? thanks

[bemasher]

Good scope or not it's not really all that necessary. I think my brother bought it at Target for like $30 and as long as it provides some accuracy to where the BB's go it doesn't matter too much the quality. The spring strength is entirely up to you.

[Perogie1515]

If I am getting a VSR-10 G Spec by Marui, and I want to upgrade the spring, should i also get the zero trigger? or does it matter, im trying to just get it to 450+ fps, and not any special barrels or anything. So is the zero trigger worth it?

[cecildawg]

ok i know u said to discars this commetn but im just going to tell u if u want to upgrade to 450 fps u will need a lot more than just the spring. i have the gspec and i bought it from a friend who had redwolf do a 350 fps upgrade. the piston wore off because they left it stock like idiots. im going to upgrade mine to 450fps right now also (i just ordered all of the parts for it) laylax parts are good so im getting all laylax cuz i know they work well together.

[maggot450020289]

if your gonna upgrade ur vsr (if you havent already old comment) your gonna need the zero point trigger system and id say upgrade your spring guide to laylax... and the zero point comes with the piston so you dont need to buy another piston

[hirotaka1234]

great vid, very detailed. im gonna get a vsr near future and this vid will be useful when i do.

[Perogie1515]

Is that the Marui VSR-10 G Spec? Nice video btw

[bemasher]

Nah it's not the G-spec.

[lilyankee217]

awesome video, i just ordered that gun!!!! it looks great. i hope you make more vids!!