92 honda accord racing at the track all motor

[jayrq2o1]

wow... just a cam. i seriously wanna do that now that i got my f22 out. i might just replace my h22 with the original engine! what grind/company?

[Feenyxxx95]

wow, if that's seriously an f22a1 in that car, consider me shocked.

[future62]

Good stuff man

[f22a4boy]

f22a1 all the way!!!!!!!!!!!!!

[iwanaGoFast2010]

its a racetrack, not a ricetrack

[hondahp18]

wtf!i need to know what you had/have in that car!!!lmao im lookin for these times myself

[iTaNkProductions]

where did u find a cam for a f22a1?

[rkewer1]

lots of places make cams bisimoto, webcamshafts, gude, f22parts.com

[iTaNkProductions]

thanks

[ersnewpimp]

@rkewer1 Don't forget Delta, 272 Regrind from them I paid $93.50...and man can I tell a huge difference over stock!

[cb7pwn]

@rkewer1 i know this vid is pretty old, but what did you have done with her? you have an h22 tranny? im lookin to keep my f22a1 and get these times at the 1/4 mile

[rkewer1]

@cb7pwn h22 tranny big cam h23 intake manifold and weight reduction

[rkewer1]

stock cb7 run between 17.0 and 17.5 in the 1/4 mile stock.

[blackghostlikerice92]

any one no what a stock 1992 accord ex 5speed with f22a6. 0-60 time and 1/4mi et time is. cause my cb7 original engine was swaped with a what i was told a 90 accord si f22a6 and installed a uknown cam. and i dont feel like breaking it opean to find out. i think its quicker than a stock one. idk i did smoke a 99 eclipse with intake and catback installed on it and got it up to 125mph on a 1.2mi straight .

[blackghostlikerice92]

what does the h22 trans do make it faster/ better gear ratio?how much of a difference does it make if u have it

[rkewer1]

@blackghostlikerice92 h22 tranny has lower final drive 4.26 compared to 4.06 for h22 and gear 2nd through 5th are shorter the lower and tighter together the gears the more tq and tighter rpm range you can run.

[blackghostlikerice92]

so it makes it faster off the line. i was just woundering if changeing the trans would make it better than the original trans.(faster/stronger trans)

[dglassmyer1]

@blackghostlikerice92

Ring and pinion ratio, aka final drive, either way the differential gearset, is THE key factor concerning acceleration.

[blackghostlikerice92]

what do u think a cb7 with same mods but has a f22a6 motor. would do on the strip? would it be quicker?

[rkewer1]

@blackghostlikerice92 the difference between the f22a1 and f22a6 are the intake manifolds and the exhuast manifold with very mild alteration in computer I have changed all of those perameters so there would be no difference except the over all condition of the mechanics of the motor like bearings and piston rings.

[blackghostlikerice92]

so same engine when moding. but when both are stock its got alittle more kick than your f22a1.interesting thanks for telling this. im a chevy guy but got into these little honda toys that get good mpg. and are fun. thinking of hotroding it up for more fun.

[420Nitsua]

Mad props bro nice CB im in the works of doing almost the same thing.

[HighpsiaddicT]

nice n/a man where did you get the slicks im trying to find where to get some

[rkewer1]

@HighpsiaddicT just go to mickey thompson web site and find a dealer

[rkewer1]

cam, dual plane intak manifold, kamakazi header, ram air intake, light pullies, light flywheel, h22 tranny, ecu chipped to remove govener and rev limmited (for an h23)

[cb7rools]

what all is done to that F series?

[rkewer1]

I launch at 6000rpm when I have my slicks on 3000rpm with street tires

[kongfu90]

hey i was just wondering what rpm do you launch at?

[elnenedelamaravilla]

nice!

[joshua2442]

nice ride and time

[windsurf7772]

this dude wrote to me a while ago he said the best thing ya can do is replace alot of the electricals in the cb7 s cause there old school now. like replace with performance leads coil ect ..

[jszuba]

I bet if I ran a bare engine with some wheels on it, it'd be a lot quicker... :P

[chillin943]

what did i run in the 8th?

[windsurf7772]

hi buddy, i have a 1990 exi 2.2 non v-tec with a cold air intake and need some more horses. can you tell me what is the best mod for thease engines. what mod got your car going like that?

[assclone15]

h23 intake manifold give you more air

[kmnako]

hey im wondering the same question if you have time plz tel me what he have said plz and ty =)

[windsurf7772]

i know the webb cam shaft would of made alot of difference. as well as the fidenza fly wheel. and i think he has just removed alot of wait from the car. but still to get hat time the car rocks, man

[linkdarkshadow]

How much weigh reduction exactly did you need to make to make it run like that?

[rkewer1]

900lbs

[linkdarkshadow]

...God! Thats almost half the cars weigh(since the car weights around 2 tons).

Good show mate!

[ttrbykir]

u mean almost a quarter

[linkdarkshadow]

Well... I kind of needed to be reminded of the weigh units at that time.. so... yeah I know, kind of stupid.

[derkutu]

Long live F22A

[aiuele]

how do u get it to run 13.9? is a a1 with wat p12 ecu h23 intake mani a4 header 2.5 inch cat back ? and 3inch intake? where u have done to her msg me back i am really wanan c wat my f22a1 can do with some cash

[rkewer1]

13.4 is my best time wilth h22 intake manifold, kamakazi header with 2.5" collector, made the intake my self, webb camshaft, fidenza flywheel, h22 tranny, slicks, and alot of weight reduction

[StockDC2]

Dude, that is a KILLER time. I can only imagine what a CRX would run with your motor...

[sharpbdaniel]

what are the specs on that cam? and what supporting mods do you have?  Im about to throw a cam in f22b; 455 lift and 225 duration, should be pretty nice.

[rkewer1]

regrind cam with original f22A1

[fatboy1185]

what cam did you use, regrind??? also, are you running the h22 tranny?