Learn to fly a 4-CH Co-Axial RC Helicopter from the real expert!

[brian82776]

Thats a 3 channel....

[akashmuthuraja]

wat r the a,b,c drag buttons on the top of my remote

[narcovice]

miness you need the rudder spinning to adjust the screw in order for not to continue when its not turning

[TheBros24]

Can this heli be flown outdoors?

[xhelicopter]

@TheBros24 Can only be flown outdoors :)!

[xXhorrschdXx]

@xhelicopter

you can fly outdoors and indoors.



[Timi116]

@TheBros24 I had this one, I tell you, it's not that great to fly it out in the wind, if there is minimal wind speed (like 2-6 km/h) there suld be no problem, but once it blows more than that helicopter will follow wind direction...

[2000xlt]

why is nightflyers video here on xhelis channel

[renahs1]

As a novice I just picked up the same model Exceed Blazing Star. It came with a 2.4GHz WK-2402 Transmitter with auto code pairing. After turning the transmitter on and allowing it to cycle I then plug in the LiPO battery. The red LED lite flashes rapidly but never turns to solid red LED. Neither the servos not the rotors respond. Help??

[keepbangingbabay1]

(music pause) wow (music continied) nicce!!

[TheABSoLooT1]

Nice Heli my friend.

[Me102288]

seems pretty touchy, is there a sensitivity ajustment? I'm trying to find a 4 channel capable of moving like a real helicopter. I'm a beginner helicopter pilot, but I do fly fixed wing aircraft.. my 3 channel mini heli got old in about 2 flights because of the missing link. er channel in my case. anybody else get anoyed when the have turn 90 degrees, move forward then turn again. I just wanna go sideways lol

[solleil1231]

i think you got space for it :) an nice heli

[alwasmy450r]

I flyed co axail 4 Channel and 3.5Ch .. they are very very very very Easy to fly .. you can fly them from the first time without any shy ... but they are not good outdoor .. very light against littel windy roooor .

6 or 7 CH 3D is the ruooool .. not easy at all ..

[Shiroblack]

Shiny!!!

MY EYEEEES!

[pjerry72]

ugly

[juroxzg3]

Looks Stabile :D How Much Does it Cost??

[stupidkid658]

@juroxzg3 on xheli its $125

[kc7wwy]

the tail rotor blades weren't turning , is that normal on this model of helicoptor ?

[pieman12345678987654]

@kc7wwy yup. its coaxial, so the upper and lower blades spin opposite directions counteracting torque spin.

[etmax1]

@kc7wwy That's because it's a coaxial (2 sets of counter rotating main blades) helicopter so the tail rotor is just for show.

[akashmuthuraja]

@etmax1 i am no expert than u in helis but my coaxial f418 does not follow directions perfectly if is not fixed

[akashmuthuraja]

@akashmuthuraja i mean is the tail wing is not fixed

[lancezhuable]

how high it can fly?

[chinjihoe]

i have a lama v4 but wheni try to hang in the air , the heli will go spin... all the time

i broke my plastic window cause of it

[TheCrazy135]

@chinjihoe use the trims

[Dillonfromforks]

@xhelicopter

has anyone ever thought of installing little solar panels on top of the chopper so when flying in the sun it is also charging at the same time? I did that to mine and have a patent pending. Im gunna make millions!

[RCheliL0vr]

YOU STOLE STUFF FROM NIGHTFLYYER!!!!!

[GGames2009]

Hey man, my heli keeps spinning while in the air even though I only touch the left analog... It is 3 channelled so I am only commanding it to go up... And it keeps spinning and going somewhere on its own...

[xhelicopter]

@GGames2009 Hey GGames2009, make sure the throttle trim and throttle stick is down and be sure to adjust the knob. Our technician would recommend you to upgrade to a 4ch because it has more control and is more precise, whereas the 3ch is great but it is more of a toy. Hope the information helps and for further assistance, feel free to check out our forum at rcdiscuss . com

[GGames2009]

@xhelicopter Thanks, getting closer :).

[xhelicopter]

@GGames2009 Awesome =) You'll be a pro in no time, GGames2009!

[GGames2009]

@xhelicopter I will try leveling the swash plate thing-maybe it is causing the spinning?

[xhelicopter]

@GGames2009 yup, make sure the servos are leveled before the heli is turned on as well

[MrCrossbiker]

Nice to see you here ,nightflyer.Since two months I am also flying coax-heli ! Great fun !

[muscledude101]

im 11 and i can fly this easy!

[xhelicopter]

@muscledude101 Hey Muscledude101, glad you enjoyed the product!! You are going to become a pro at this hobby in no time.

[rumblecloud]

One minor point, in this entire "learn to fly from the expert" there wasn't a whole lot of teaching. Most of it was you flying the heli around a gym. The only instructional part was when you talked about the tx.

[xhelicopter]

@rumblecloud Hi Rumblecloud, thank you for your comment. We take our viewer's concerns into deep consideration, always. Please be sure to check out our tutorial videos located in our xhelicopter youtube channel. Hope the information helps in regards to your inquiry about tutorials!

[museumet]

are they hard to fly? for a beginner

[xhelicopter]

They are great for beginners, just make sure you start indoors as wind can be an obsticle

[roesnight]

@xhelicopter oh well i guess im really good cause this is the first heli i ever had and i had to start outside cause there are small rooms in my house :D

[xhelicopter]

@roesnight Hi Rosenight! We bet you're a pro at this hobby already! Glad you're enjoying the heli =)

[jimmytomica]

dude you should blur out your lisence plaste

[RCburner]

i have a rc heli from xheli like this one but the skidders can break very easily witch is really dumb

[rbmdl]

is he the nightflyer?

[endlent]

yes

[dvdman18]

how high?

[powskier]

Why isn't the tail rotor spinning? Why are there two main rotors? It's looks dorky with two and would look a lot beeter with just one like many other rc helis have.

[fcdrc]

How long is charging time on his helicopter battery? By the way, excellent video.

[NettmediaHD]

10-15 min

[ryanrox20]

i would like a heli like this but i cannot find a good indoor place to fly it

[NettmediaHD]

You can fly them outside too!

[REDie2009]

Jeff was like all " LEAVE ME ALONE! I'M FLYING!"

[cooldragon224]

is it made by metal?

[xhelicopter]

Most of the body is aluminum

[rockerdock]

is it the same as a lama e-sky v3

[crossmotto]

Why do you have two youtube accounts NightFlyyer

[thechoosendude]

It's not his account.

NightFlyyer gets "freebies" from Xheli & NitroPlanes (same company) to make these videos. They promote the sale of their products while Dave gets handouts in exchange.

[janner76]

Hi live in michigan and i am looking into buying the first real helicopter and i am looking at the Walkera CH-47 Chinook would that be a good stable heli

[xhelicopter]

It's a big heli if you ask me. It is stable depending on wind conditions. If you are just starting off I strongly recommend the Blazing Star first.

[tlsmts]

Hi Dave,

I have a HBK2 heli. Your tips video for the HBK2 was very helpful...thanks.

I just started a couple weeks ago with R/C helis and can hover indefinitely in calm wind, but all bets are off when its windy. I would love to find an indoor area like the gym you used, but assumed permission would be impossible.

Any hints to getting access to indoor flying areas would be appreciated. Thanks.

[thesquisheee]

heya, i've recently got a 4ch heli, i love flying it around and have found control much easier than i thought (have gone straight from 2 channel to one the same as that) but the only thing i have trouble with is finding a point in the throttle where it will hover. the throttle is on a ratchet, one click makes it go up slowly, if i reduce it one click it starts to drop. i;ve tried adjusting the trim by minute amounts but i;m still not getting anywhere. any suggestions or can a 4ch just not hover?

[xhelicopter]

Try our support forum at RCDISCUSS . com we got technicians and people who will help you out

[doug0126]

Hi there, I'm getting ready to purchase a new helicopter and I have been all over xheli . com. I have been flying 3 channel helicopters and have learned to fly them fairly well. I want something in the 125-150.00 price range. I want a 4 channel, and want the most I can get for the price. I like the blazing star really well, is that a good choice or can you recommend something better?

[xhelicopter]

The Blazing Star would be great if your getting into 4ch flying. It is one of the most stable helicopters available in its class. You will not be disappointed. The control of the blazing star is solid.

[JVCTHUNDER]

hi dave,

My name is Joe I live in Australia and i am new to rc helicopters. I am wandering what helicopter i should purchase. Because of the australian dollar at the moment it is quite hard to atain the $180 i need to purchase the Blazing star. Do you have any other good helicopter for beginners around 80-120 USD?

Thanks.

P.S Love your videos

[xhelicopter]

Hey Dave, yeah the conversion rate sux rite now, but there quite a few good helis in your price range. What you need is a 4ch co-axial to start off with. You can get a apache, comanche, or even a coco lama. Go check out our site at xheli . com and find one to your liking

[xhelicopter]

Also look into the Falcon 40

[shotgun301]

have 2 of them 1 for night and other for day... great heli for beginners like me.

[sparton1994]

How much did it cost?

[JezUK456]

I got a twister bell one... They are very good for newbies!!

[Winston51249]

Well built and fun flying machine! I like it a lot!

[Flap999]

Nice review, thanks!

[azh01e]

Ahhh, so glad he got the hookup. Congrats NightFlyyer, I knew you'd be a perfect.

[nibbler125]

dosent seem to have much speed in ff

[crzygutrsnobrdr]

thats because it's a coaxial there more for beginners...but the cx2 has some really nice ff