Framing house construction for the building of a house

[bomzie1]

who put on a rim box before joist u suck and y not put the brace on the wall on the ground before u stand it with a pivot nail and y put a 2by4 on the bot of a headder total waste

[redfeettube]

Whew you gotta be real handy with that nailer. Nice vid.

[Sodnal]

Is particle board typical for exterior walls? What about plywood?

[taggytagz]

@Sodnal Generally plywood is more expensive so its common to see OSB or aspenite used for sheeting walls and the roof.

[telorinodelhoyoo]

02:25 the guy with the nail gun is very fast

[travelingcarpenter]

I get pissed when I see my frame nailer used like this in other peoples hands. 3:35

[weetoy69]

OSHA NIGHTMARE , NO SAFETY GLASSES AND NAIL GUNS , NO HARD HATS , GUY ON PLYWOOD CUTTING BAND WHILE ON PETTIBONE . YOU CAN'T WALK TOP PLATES .AND NOW THE TECHNIQUE . LEAVING PLY OFF THE WALL AND LEAVING THE TYVEK OFF THE WALLS BEFORE STANDING ? PLUS , SLOW TECHNIQUES . I'LL SMOKE THIS CREW ! I DONT SET STAIRS LIKE THAT . OVERALL AMATEUR FAIR IN COMPARISON TO OTHER BUILDERS .

[spinceara]

very interesting

[44godson]

Hell I think it was done well.

[xGenuineGenie]

so all I need is a nailgun, plywood, some douglas fur, and a hammer and some nails? ROFL

[green66vw]

yeah track homes.so what

[67tr876]

And this kids is why my house will not be shit wood at all. FUCK WOOD HOUSES

[howtofinishabasement]

Pretty fast :)

[300Spartans1]

anyone else notice the blood on the hands guy on 1:18

[vlineguy]

@300Spartans1 its a camera thing lol I was building an apartment when I was younger and a tv crew came out so i stopped and waved, my coworker was laughing at me and hit his hand with the hammer, lol some people get nervous in when they say action

[travelingcarpenter]

@300Spartans1 red saw handle

[ugrastroyinfo]

Very nice video "Building an art" YouTube channel at UGRASTROYINFO

[southsko]

hacks

[alkimst13]

If you'd come out to a jobsite you shit talkers, i'm sure some would empty a rack of 16's in your asses.

[ouwetwarrior]

Why is there porno music? its not like these guys are doing a good job I been in carpentry since i was 12

[johnnyfarout]

production light frame carpentry... everyday is like an Olympic event.

[Taxminia0311]

Thats what you call crapy subdivision housing...that not even good enough for the ghetto people to live in, then again they wouldn't mind lolo.

[IchiDeux]

Holy shit, that's some poor carpentry

[09bluesfan]

@ bottomfeeder Some safety regulations are just ludicrous and even make it harder to work or can actually cause you to have an accident. I loved just holding a trigger and shooting nails with the nail gun now its individual trigger per nail. My thumbs have blisters on their blisters!

[bottomfeeder73]

Ahh, the days when all the safety bullshit wasn't in place. I have a framing business and I tell you, it's crazy what safety regulations these office jockeys come up with! They must be retarded.

[gaoxinglangblog]

hi everybody. I'm an apprentice carpenter who is interested in talking about construction with people online. If you are interested, you are welcome to add me to skype. thomas46073 is my username. I have graduated from uni but dont enjoy the white collar life.! im a motivated person who wants to make the most of my oppertunitys in the construction industry.

[Rangerbelt]

Davidthesensi-i want you to build my house. that nasty mouth of yours will weld the wood together and make the house nice and strong.

[coalyard2007]

are they using 2 by 4's on the outside walls?

[mcbridecreek]

These kids are pretty good framers. I have framed for 25 years and you have to have a balance between speed and accuracy. You pull out your hammer only when you have to. The Hitachi guns are great. I framed just like these young guys for years but when I saw others hurt I started wearing safety glasses and ear protection. Harnesses suck. I wore a linemans hard hat when working with trusses or cranes. It only takes 10% more effort to do things right. At the same time you can be fast. Nice Vid!

[OzzyKush]

no steel cap boots, no overalls, no protection, no ear protection

gay cunt dickheads cock sucking pair of poofters

[bimbim123456789]

im in canada i do that in -15 weather :)

[wolfhammer2010]

I would love to have seen OSHA out there with them.

[PirateDrft]

@wolfhammer2010, yea.. I didn't see very many steal toe boots or hardhats on the job. I was thinking the same thing.

[trtl7]

i am only 12 and my dad taught me how fram. This is a good video. My dad likes senco nail guns

[eljovenarroyo]

best nail guns I've ever used

[eljovenarroyo]

best nail guns I've ever used

[davidthesensei]

@digitalbumpin whats wrong with Pre-fab Floor Joists, they are engineered to be stronger than your typical 2X and have a higher load bearing rating,,not to mention they have engineered pop-outs to maintain the beams integrity as pipes and wires are passed through,,, they framed those walls using loose studs, prefab walls are built in a factory and delivered to the site,,, if you dont know wtf your talking about its best to not speak at all

[kcbasementfinishing]

This is an old school video. The guys building the house are American.

[woodnsteel19]

This is Framing.Way its done-any other approach to the job is a waste of time and material.Nail guns and skilsaws buddy-you wouldnt bring a knife to a gunfight would you?

[pilotdude1123]

im only 15, and me and my dad could frame better than these guys

[Sodnal]

Nail guns have taken home building out of the hands of the professionals and allowed amateurs to dive in-with good and BAD results.

[boatstrips]

@Sodnal

Haha. No they've just sped up the job. For professionals and for hacks :)

[trtl7]

they are using hitachi

[testbooster]

what kind of Framing guns are they using? they don't look like DeWalt

[miciahk]

I love building...... I can't build anymore due to my body...... These guys make me wish I still was able to do it all and enjoy it just one more time......

[44godson]

Work was fine probably a new company. But yeah music needed some work, but this aint the club. LOL Good job fellas keep it going.

[pmaldinis]

Nice, but no one is wearing a safety Harness. that's not a safe way to work

[zyler24]

i liked the video...thumbs up ! music needs work though

[Digitalbumpin]

Horribly made house. Everything was either pre-fab or very poorly done.

[assassin7actual]

worst nailing pattern i have ever seen

[tkx7]

suppose you are start framing from a slab- do you still need to use that subfloor or do you just start right off the concrete?

[robertking21]

are you serious

[robertking21]

are you for real 

[MrCrenshawmike74]

how did he get the nail gun to half shoot the nail at 1:30 to pull the header up?

[BlackSoulent]

@MrCrenshawmike74 it looks like a hammered nail, not a nail with the gun

[281mason]

@MrCrenshawmike74 just pull up on the safety and hold the gun about 2 -3 inches from the wood and fire.

[robertking21]

pull back on the front of the gun and hold it lo=ike 2 inches from the board and shoot

[red666A]

I think step are bit more tricky to build. I did some framing work before and it hard work

[ansonwilson]

This music is hold music... Where have I heard it before?

[bluejarw06]

it is Sundance Homes

[nickt916]

can you guy come do this for me!!! ho wmuch does it cost what was done in the video?

[FireFrantic]

OMG LOL! I want one 2

[TheFrank87]

I start tommorrow doing this job lol, hopes it gonna go well

[twotwentyswift]

Good carpenters make it look so easy. Nice job guys and great vid. Thanks.

[overtenemy69]

look at these hindoos trying to be carpenters

[joshua1auhsoj]

damn i wish i could be building houses..too bad the economy sucks fucking dick

[Smokalata]

i feel bad for the people that own this house must be hard to find some real framers there and what are these guys stupid wheres the safty

[DavideFellini]

@Smokalata i feel bad for u to lol

[titleistpvx]

looks too big for the master bedroom not to have an en-suite!!

[mackofka]

не хотел бы я потратить свои деньги на таких строителей

[davidthesensei]

@ beeroosterm..HACKS WITH F@#$ING NAIL GUNS? Im a builder with over a decade of framing under my belt and I can tell you from experience, that many carpenters can accurately fire nails on the stud rapidly and they pride themselves on accuracy and speed. Do you suggest they hand-bang your entire house? Good luck finding a contractor willing to do that. And the foreman may have just been in a hurry to go home, or it could have been a grunt being a smartass on the job, happens all the time;)

[hawker800FO]

@davidthesensei i did a highschool co-op we barely ever used hammers lol great fun haha you are 100% right

[vlineguy]

@davidthesensei Framed for 28 year's my right arm's about gone cause of nail gun's but it probably would have been gone sooner if I had to hand drive all those year's , Beer rooster would be tired in a day I would think lol hand driving, but hey the economy suck's I would build him one like that but he better come up of some dough because it will cost him,

[Heyemeyohsts]

nice video, thanks for posting!

[hansom0thomas]

Excellent Video thanx for posting hope to see more like on here.

[lolzzzproductions]

yes built much diffrently in aussie. that guy at 2:23 is a bullet

[aussiebloke87]

in australia houses are built much differently

[fickeriki]

in germany, too ;-)

[vlineguy]

great Video good job on the house, in kansas we dont frame much with the silent floor we use floor trusses mostly, but have in few instances used that same material, we hide the plumbing and heating and air in the trusses , nice video

[andybarnes20]

screw and glue  floor board stop sweeks but nail faster. is stick build cut and pitch ?

[d1incharge]

glue is the ONLY fastner that matters, the nails/screws are ONLY there to hold it tight until the glue dries you canadian moron. Probably still using plywood too? There are the occassional screwers here in the states, but they will squeek the same if you dont glue it right, just wasting money and time with screws. That isnt your standard floor joist, those are perfectly straight, and have greater surface for glue. Also osb flooring doesnt really warp canadian moron.

[doosriradha]

@d1incharge im reading what you wrote, its interesting, im building a house in two months, can you give me any tips

[d1incharge]

build it somewhere warm? j/k If you dont hire a professional, know one...if you dont build more than one every two to three weeks you are not a professional....so find a guy that builds ALOT of homes...... pick his brain. Floor plans=most important. #1.Try to avoid Trusses! 2. People out there are selling anything and everything as the "new wheel", like spray foam BS,  housewrap, radiant barriers in the north, engineered lumber........be prepared. 3.You will spend @least 30% more than you plan..

[lolzzzproductions]

@d1incharge why would you say avoid trusses. when they are built properly by a good legit company there great but when there built by a hopeless company dont go there. if you want trusses ask a supervisor or friend who knows of the company and ask what they say. in australia i muchly prefer trusses then a stick roof.

[d1incharge]

Trusses can be built crappy, but that is not what I am talking about. Well built trusses are easier to install, but all trusses are flawed due to the design. Ask any good drywaller and they will tell you most of their call backs will be truss related. Anywhere there are temperature or humidity changes, the trusses will raise and lower every season in the center of their spans. It is also the only place on a home here you will find #3 lumber

[DC180]

these guys could build the sickest grow room.

[grubesick]

Wow, crazy mullets EVERYWHERE!!! Ahahaha... GL.