Swiftech H20-220 Ultima and Feser 120 XChanger finale installation liquid cooled pc

[stjo555555]

some leaks with the swiftech?

[SCARSAC]

my girlfriend loves you voice she said you sound like someone off PBS

[ownTer]

You shoud lift the rad of the bottom of your case a bit to allow for just a tad of airflow. Youll get better temps for sure.

[kwebber1234]

wow you actually had space to put the radiatior INSIDE the case. wow. so wat did you do with the stock raditior?

[thegcpu]

@kwebber1234 What stock rad,the case did not come with a rad.



[kwebber1234]

@thegcpu the rad the came with the watercooling kit.

[unokilo321]

lol, I have my pump just sitting on the bottom of the case, it's not mounted anyway. i'm thinking about getting this case. I like that you can have two 220mm rads in it, question though, are the 2 x 120mm fans sandwiched between the rad and the top of the case? I couldn't see the fans on the top mounted swiftech Rad.

[Purepromedia]

Cable Management looks like shit.

[thegcpu]

The coldest water hits the CPU first.Res>Pump>Rad 1>Rad 2> THEN CPU>>

[MorrowMedia]

Is the direction of flow like this: Reservoir > CPU > Rad 1 > Rad 2 > Pump > Reservoir ? or is it reverse? I am going to have the same exact setup next week, and was not sure what the direction of flow should be. One way to coolest water hits the pump first, then reservoir then CPU, the other way the out on the CPU block would go to the reservoir first then the pump, and then to the rads...I'm new to this so please excuse my ignorance. Thanks.

[zataraswe]

would a feser 120 rad fit at the rear 120 mm exhaust fan space, with a 240 rad already at the top?

[thegcpu]

@zataraswe If it is out side the case it will fit.

[thegcpu]

Yes.

[UberPanzer666]

wait so you paid like $70 just to drop 8c ?

[Neomis01]

@UberPanzer666 hell yeah, i'd pay more then that for an 8c drop, it's all about every last drop :) I have the corsair h50, I just bought the H70 to get a 11c drop, cost $120.

Now I'm at 4.3ghz.

[gnuojoung]

can a thick radiator like the Feser fit up there, and have the fans mounted on the other side of the case, under the top cover?

[thegcpu]

@gnuojoung I was going to upgrade to a dual Feser on top but it will not fit. Even with the Swiftech there is only 1/2 in. of free space. I wanted to do a dual push pull fan setup and you cant even place a fan on the radiator in the case, so I has to place just one set of fans in the top section.

[dembowns]

you may find if you're still looking at putting a feser rad up the top, that there might be clearance issues between the rad and the IO shield, i found that with my XSPC RX240, which is roughly the same size as the feser, i had about 1" if not less, clerance between the back of the rad and the io shield, which would have prevented me putting the motherboard in correctly, that is why i mounted the rx240 on the bottom of the case.

nice job, looks great

[xlaurenpxx]

that is indeed a top of the line liquid cooler, i would like to install it into my cpu 9238...i will stay posted to watch more videos on this unique cooler thanks g-unit

[thegcpu]

Thats no Gaming GPU its a CAD GPU. Believe it or not that is a stock heat sink on a NVIDIA Quadro 4500.

[edge160]

that gpu cooler looks sick. what cooler is that?