REVIEW OF THE BULLI A2-T MEGATANK FOR ELECTRONIC CIGARETTES

[inyourlock]

hi scott. i watched all your vids before i started buying anything..

then i got a provari,lavatube,puff tanks i am waiting for clockworks and odysseous.

just got the bulli A2 TM. i have been told on a forum u have to oxidise the mesh but no vids say this or show this... please advise.

many thanks for saving me lots of cash testing low standard equipment.

BATHY ( uk vapers)

[igetcha69]

@inyourlock

hi mate,

no, you don't need to oxidise the wick on the Bulli ;)

if you set it up correctly with the piece of wick inside the mesh then its the wick that contacts the coil and not the mesh......therefore the mesh does not contact the coil and no short circuit is produced :D

see my Bulli A2-T review / tutorial to see how to set it up correctly

cheers

scott

[aaaaaaaawesome]

Hope Cetin is well. A2-T were supposed to be on sale on the 30th of Oct.

[X5H2o]

the flavor is only your wick 0,15 nice flavor good vape - mid. flash / kick. 0,20 is hardcore flash nice flavor awesome vape. 0,13 best flavor - nice vape - low. flash.

[gunswink]

Hi Scott Got my A2T on the 12th of Oct. that and the Provari are the best money I have spent on vaping.The A2T is art work and its built very well, as you said it was.........I have spent alot on mods no need to anymore.Thank you Sir.

[igetcha69]

@gunswink

cool, glad you are enjoying your Bulli! :D

cheers

scott

[TheJohnEAngel]

Hi Scott. For the upgrade kit on the website, there are instructions for drilling a 1mm airhole. is this in addition to the hole that is already in the atty and if so, will you no longer be able to use the standard tanks afterward? Thanks

[igetcha69]

@TheJohnEAngel

hi mate,

if you have the original Bulli A2-T then the upgrade only consists of a new cone......no drilling involved

i think you are looking at the upgrade kit for people wanting to turn their original Bulli into a tank Bulli (the original Bulli used wool filled carts)

cheers

scott

[cyblood666]

Hi Scott, great review! Today I have received 2 Mega Tank atomisers from Bulli, and I'm very satisfied, though I have a problem maybe you could help me out a bit.

It leaks a bit between the bottom part and the middle part, just where the threads meet. Is there something I can do to stop the leaking. This is not pocket friendly this way!

[igetcha69]

@cyblood666

hi mate,

I've not experienced that problem so I'm not sure what to suggest :(

only thing i can think off is to make the mesh that goes down the spike a little longer so that when you roll it up it will be a touch thicker........or keep it the same size but add 3 bits of the wick material rather than 2

cheers

scott

[cyblood666]

@igetcha69 I have added another strand of wick material in the mesh, but what I'v achieved is that the atty isn't going through juice that fast..something which was bothering me. It didn't stop the leaking though. Steve Montuno suggested I put some vaseline on the threads and see how it goes. Will try that. Thanks

[cyblood666]

@igetcha69

Hey Steve, I added 3 bits of wick material and I solved the issue that It was going through juice like heck. Vapour is a bit less not but I'm happy. I will still experiment more. I solved the leaking through the threads by applying Steve Montuno's suggestion..I put some Vaseline on the threads.

Thanks a million Scott! :)

[igetcha69]

@cyblood666

nice one mate! :D

[sister4strings]

@Queenweezy1 don't you have any shame? Why are you so rude. Just because your on YouTube it gives you the right to say mean things to people. Screw you dude.

[gunswink]

Thank's Scott and @caseyip1, I am sold on it for sure now.

[georgerajdixon]

Hi Scott, I'm looking to upgrade from my Riva- looking fo a better throat hit really. What should I go for? I heard the Ego is better but it looks practically identical. Hw about the Screwdriver? Preferably I'd like another 510 device. Cheers!

[igetcha69]

@georgerajdixon

hi mate,

Riva / Ego.......same thing really, so you wont notice any improvement in throat hit.

how about getting yourself some low resistance atomisers or low resistance 510 cartomisers and also increase the nicotine strength of your e-liquid......higher the nicotine content, the stronger / harsher the throat hit ;)

but if you did want to get a new 510 device then id recommend the Provari as that is one of my faves :)

cheers

scott

[georgerajdixon]

@igetcha69 Cheers Scott, I already use 36mg liquid (!) and LR atties... The provari is about £200 apparently. is there anything cheaper that allows 6v vaping? I've never tried 6v... a bit concerned about thebatteries though, they look a bit dodgy. Thanks again for your reply... much appreciated as always George

[igetcha69]

@georgerajdixon

hi mate,

you are vaping 36mg liquid whilst using a LR atomiser but still not getting any throat hit!!?? im really not too sure what to suggest in order to rectify that! lol

for a cheap 6v device, check out my review of "The Bombshell"

cheers

scott

[georgerajdixon]

@igetcha69 Cheers mate. I do get a throat hit, just feel like it could be better. Thanks anyway

[caseyjp1]

The flavor increase is also noticeable on the ego-t LR "b" tank vs. the LR "a" tank...which other than the rebuild-able ability of the bulli, are generally the same 'mechanics'. My bet for flavor increase (which I have noticed on my ego gear as well) is almost certainly due to the b tank's air vents. Not a huge difference, but may be enough to make a difference. Of course I'm speculating, but other than the side vents on the b vs. a, you're right, there is no other reason for it. :-)

[igetcha69]

@caseyjp1

hi mate,

yep, i think you are correct :)

cheers

scott

[gunswink]

Great review as alway's.The bulli A2T atomizer look's great. Want one, but you can't get them till October.I have never used an ego tank how will it compare to dripping? Thanks

[igetcha69]

@gunswink

hi mate,

well if i had a choice of dripping or using a Bulli............the Bulli would win every time :)

cheers

scott

[caseyjp1]

@gunswink I'm with Scott on this one as well. The ONLY reason I drip AT ALL is to test juice. If its crap, I don't have to empty and clean a tank. If its awesome, well, then, fill that tank! :-D

[MountainMonsters]

Scott I just want to know your "current" preferred Vapor setup! =-D

As always Superb review!

[igetcha69]

@MountainMonsters

hi mate,

Provari at 4.4v + 2.3ohm Bulli atomiser + Eskimo Menthol E-Liquid :D

cheers

scott

[MountainMonsters]

@igetcha69 Awesome! I should have know =-)

thank you for taking the time to reply!

-Andrew

[TheGusK]

Scott, how well does that gold plating work on aluminum?

[MountainMonsters]

@TheGusK He explains in another one of his videos that it is quite complicated.

[igetcha69]

@TheGusK

hi mate,

plating aluminium is a far more complex process that requires a lot of experience to get right..........im gonna start practising on aluminium soon, but i dont expect the results to be very nice! lol

cheers

scott

[sunhouse76]

Nice one Scott lad. cant say i like tank vapeing, i much rather direct dripping with the tips. but good to see another rev bro. have you got a new cam? pic looks clear.

also hairs getting long boyoo lol. i can talk though lol.

hope all is well my friend :O)

cheers!!

[igetcha69]

@sunhouse76

lol, no its the same camera i have been using for quite a while now ;)

and yeah, i need a haircut! :D