phoenix arms HP22 suppressed, Compensated Berreta, Armscorp 45cal and competion armscorp 40cal

[jldwolfe]

Please let us have some more info on how you attached a silencer to this pistol.

[helmet600]

pimpong ping pong

[crowvalley21]

meron paa! hahaha... napatawa ako dun ah, apir sir!

[Z32Pimpin]

Dude........you are such an assassin.......just admit it

[tukne1875]

I love you!!!

[Gobyador]

@tukne1875 i love you more heart

[pre9120]

I have a HP-22 that I bought the first year that they came out. The sear broke and I sent it to Phoenix Arms and the completely refurbished the pistol and sent it back to me free of charge. It looked like a brand new pistol when I got it back. I would love to know how you attached the suppressor to the pistol. Any chance for a close up picture for the end of the barrel. The three inch barrel that I have just doesn't seem to have enough sticking out to thread.

[supertruckertom]

I wouldn't trust my life to this contraption. The silencer keeps the .22 from cycling properly. He might have been using subsonic ammo as well. Hp22A needs standard ammo.

[Gobyador]

@supertruckertom the contraption cannot be blamed for the malfunction, nor did i use any subsonic rounds, i was it was a armscor .22lr standard rounds (rock island armory) that was already 2 yrs old the pistol, thats why there is stil a sonic crack on the video, was so dirty after firing 200 rounds, since all who have shot a .22 know that a .22 rimfire rounds are dirty rounds, they always foul up any pistol, i do have subsonic rounds for my pistol, but i always change to a lighter recoil spring

[supertruckertom]

@Gobyador We had the first mis-feed on ours tonight about 150 rounds into a box of 500

My stepson was shooting it for the first time and was not holding it firmly enough I think.

I'll be sure to keep it clean. He fired two shots and then click. I put the pin safety on and checked the chamber. No round in the chamber. What do you think? Dirt in the magazine or a limp grip? After I cycled it and showed him how to keep a better grip for it to cycle properly , no more misfires this evening.

[Gobyador]

@supertruckertom there can never be a limp grip on a 22, theres hardly any recoil, its like breeze of air pushing on a wall, limp wrist only happens on .9mm, .40 S&W and 45 and it would be failure to extract or a double feed if there was no round on the chamber but round on the clip just tap-rack, dont over engineer it, dont MIT it, dont go for rouge scholar on a pistol, just tap and rack, and keep the magazine clean

[djbneozen]

@Gobyador So...putting a lighter recoil spring in ...a suppressor...and subsonic bullets and the HP22 still cycles properly? I'm sending you a private message.

[dozzy000]

how is that suppressor made?

[trevticks]

What state can you legally make a suppressor in?

[dozzy000]

hi man! any news on that video o pictures you were preparing of the suppressor you made? we all would like to know how you made it or how you manage to attached it to the short barrel.thanks.

[MrBallistics]

How does it attach? I have a hp22a, its not a barrel you can thread...

[dozzy000]

@MrBallistics i wanna know the same thing, man,,,,,,we all wanna know how this buddy made that incredible suppresor, its works quite well and he made it wrok with the standard barrel not even the 5" one. cool.

[awhitler55]

what is the name of your suppressor

[Gobyador]

@awhitler55 doesn't have a name, just made it myself

[awhitler55]

@Gobyador You should make a video on how you did that its beautiful

[Gobyador]

@awhitler55 i did made one but somebody flagged the video, said that it was inappropriate

[awhitler55]

@Gobyador you should definitely make another

[Gobyador]

@awhitler55 been planing to make another, this time it would be for my berreta 92f, just need some time, a few days off from my work and in a week a may be able to construct a new one, will post it here soon

[dozzy000]

@Gobyador hey man! thank you for the video, but again you should post one of how you made that silencer for your hp22 i have one as well and i would love to know, hell, we all would like to know how you made it and what materials you used, please please post it when you can, thanks again mas. GO MANILA POLICE!

[dozzy000]

@Gobyador were you using sub-sonic ammo on that phoenix or it was standard velocity ammo ? thanks for the video. we are all waiting on the other video on how you made your silencer.

[Gobyador]

@dozzy000 its a bit difficult to make a new video due to my hectic schedule, been designing a new suppressor a bit more smaller and lighter, i was using standard velocity ammo on my phoenix when i made this video

[dozzy000]

@Gobyador wow,standard velicity,that was a very good suppressor its was really quite even though you were suing standard velocity ammo. well, someday you will find the time to show us either pictures or a video of that silencer. thanks man.

[dozzy000]

@dozzy000 hi man! merry christmas! and happy new year! any news on the video? pictures would just be fine man, if you could post pictures and text on how you made it would be great. i bought one and i would love to see hoy to make one specialy considering you were using the standard barrel and not the target barrel its amazing how you could attached the suppressor.

thanks.

[12GaugeLosAngeles]

The barrel don't tilt, so a good little project for a $150 gun.

[DogFashionDisco90]

hey man i intend to make one of these silencers myself. could you give me pointers or possible mishaps or point me in the direction of a helpful vid. i'm beyond capable just not yet knowledgable. id appreciate the help dude.

[GunsmithMMG]

@DogFashionDisco90 Man i'm not trying to impose but I wouldn't do it. The penalty for having one unlicensed without a NFA stamp is 10 years minimum in prison and 10,000 dollars in fines. I work in a class 7 licensed gunsmithing shop, and ATF is really brutal about these things. Just thought I would fill you in.

[Gobyador]

@GunsmithMMG cool comment, and good advise, it is much appreciated, and well noted, one of the reason why i experimented on my hp by adding a silencer was that it was all too worn out, and part of the lower receiver broke, the part where a bar like metal locks down the barrel was gone, the guns smith here said they cant rebuild it, coz its made of zinc, and its just too thin, the only way i can shoot my hp is with a silencer, since your a gun smith, hope i can get some advice from you, thank you

[GunsmithMMG]

@Gobyador Sure no problem. your welcome.

[dozzy000]

how did u screw on that suppressor?

[Gobyador]

@dozzy000 i had to remove the barrel shroud 1st and cut the shroud, slide and lower receiver till the barrel is exposed and had it lathed with an english tipe thread

[Gobyador]

@dozzy000 i had to remove the barrel shroud 1st and cut the shroud, slide and lower receiver till the barrel is exposed and had it lathed with an english type thread

[Gobyador]

@dozzy000 i had to remove the barrel shroud 1st and cut the shroud, slide and lower receiver till the barrel is exposed and had it lathed with an english type thread

[dozzy000]

where can i get tat suppressor?

[Gobyador]

@dozzy000 i made it myself, manged to copy a suppressor from gunvidder's channel he has videos with several types of suppressors that are disassembled

[dozzy000]

@Gobyador oh i see, it would be great if you could show how u made your silencer specially what you put inside your silencer, if u could show your threaded barrel would be great too so we can see how to machine it.

thanks man!

[Tramsootru]

I'd love to get a lil' suppressor on my Hp22A.. Nice work!

[illchico20]

@Tramsootru yo do u know where can i get a supresor for my Hp22a on the web ????? and once againg thanx

[dozzy000]

@illchico20 me too! i want one of those suppressors, maybe he made it himself, if u find out where to get it pls let me kknow ill do the same, but i dont know if the barrel has the thing to set the suppressor on.......

[Gobyador]

@illchico20 unfortunately there is none, the only way to put a thread on a phoenix barrel is to expose the barrel by removing the barrel shroud and cutting some part of the front portion of the slide, and the lower receiver, once i get the time, i will post a video here, on how i managed to thread it

[dozzy000]

@Gobyador yeah! we would love to see that, thanks man, please let us know when u post that video. thanks. oh by the way, how much did u pay for your phoenix hp22?

[Tramsootru]

@Gobyador Any chance of seeing some pictures? ;)

[Gobyador]

@Tramsootru i made it myself, manged to copy a suppressor from gunvidder's channel he has videos with several types of suppressors that are disassembled

[nutz305]

Neat suppressor for the Phoenix pistol. Looks like you were using cheap bullets and that's why they didn't eject. I've put thousands of rounds through one and cheap bullets tend to do that.

[Gobyador]

yup your right the phoenix does cycle much better with winchester orr cci .22, the cheap armscor .22 tend to foul the chamber and breach almost like mud, plus it was over a year old

[dozzy000]

@nutz305 as far as i know none of the 2 types of barrels phoenix offers have a threaded barrel, the only way to screw on a suppressor is to thread it yourself i think