Free build plans for the small engine GEET(similar to the small engine in the video) are available at GEET International and GEET Friends home page's. I'm in the middle of building my first small engine GEET Fuel Processor, and then I'll build GEET for my automobile as well. Thank you guys for making this video :-)
G'day., It's a nice clip, and a good Party trick, too. But, what are you driving on the road, NOW ? My 4WD 1.8 litre Subaru Touring Wagon has a Streamlined 30 Watt PV added, to retrofit it's Electrical System from "Piston-Driven" to "Solar-Electric/Piston Hybrid"Status. Saves 5.3 Litres per week (35% of Premod. Fuelburn)! Search 'SunFoil Science' for the Raw Data, & 'S. Short-Talk' to measure y'r vehicle for a PV. The Construction Clips are up, too !
People all over the world are running this same system in cars, tractors, trucks. The plans for a small engine are free. Plans for automobiles cost $250 us dollars. Search GEET Reactor(Global Environmental Energy Technology) there's a home page- with the plans. Paul Pantone is the inventor. He's Brilliant :-)
i just read an article on these engines. Seems theyve been around for a long time but the big oil companies dont want you to know about it. Ive always known weve had the know-how to make a 80mpg+ vehicle but big oil wont let it happen.
That's just a bubbler design, as the motor runs and sucks ambient air into the jar it will condensate and contaminate the fuel with water droplets. A true vapor design would use a sealed gas canister using a 12V fuel injector to spray fuel over a heated plate, the fuel pressure vapor alone would be enough to force the fuel vapor into an engine. the bottom of the vapor box would return the fuel to the tank via a pump. Your design is good for small engine but wont work on a car.
@rancheroman1961 i ran my brothers 2litre vw golf on this system today and it worked very well we drove a mile and a half got up to 85 mph then the inlet pipe broke needs some finer tuning but we are getting there i will upload a vid soon
try this experiment to test gas only vs gas+water: ... fill tank half full with gas only and mark the level on the side... run for a set amount of time, say 30min to hour maybe. (time it exactly) and mark it again to show how much was used.... empty the tank and fill with 70% water-30%gas again to the same fill mark at the beginning, and without ever touching the controls. run it again for the exact same amount of time!!! and post results! even if it burns at the same speed its still a 70% gain
@charliechopchopman this is incredible, can it produce enough vapors if you open the throttle; does it keep up. You think putting an hho inline would be too dangerous? Appreciate your thoughts
Please! Someone send this to Obama and tell him this is that Silver Bullet!
Come on Dems, you want to change the world and make it better, here is the thing that will!
Sixdouble5321 6 days ago
Free build plans for the small engine GEET(similar to the small engine in the video) are available at GEET International and GEET Friends home page's. I'm in the middle of building my first small engine GEET Fuel Processor, and then I'll build GEET for my automobile as well. Thank you guys for making this video :-)
150MilesPerGallon 1 month ago
Is that a 2 stroke or a 4 stroke engine ???
furulevi 3 months ago
@furulevi 4 stroke Briggs and Stratton.
goodmechanic 3 months ago
G'day., It's a nice clip, and a good Party trick, too. But, what are you driving on the road, NOW ? My 4WD 1.8 litre Subaru Touring Wagon has a Streamlined 30 Watt PV added, to retrofit it's Electrical System from "Piston-Driven" to "Solar-Electric/Piston Hybrid"Status. Saves 5.3 Litres per week (35% of Premod. Fuelburn)! Search 'SunFoil Science' for the Raw Data, & 'S. Short-Talk' to measure y'r vehicle for a PV. The Construction Clips are up, too !
WarblesOnALot 3 months ago
People all over the world are running this same system in cars, tractors, trucks. The plans for a small engine are free. Plans for automobiles cost $250 us dollars. Search GEET Reactor(Global Environmental Energy Technology) there's a home page- with the plans. Paul Pantone is the inventor. He's Brilliant :-)
mindthoughts1974 4 months ago
i just read an article on these engines. Seems theyve been around for a long time but the big oil companies dont want you to know about it. Ive always known weve had the know-how to make a 80mpg+ vehicle but big oil wont let it happen.
zestydude87 5 months ago
The vapor engine why better than the original?
gjannito90 5 months ago
Isnt it dangerous to put it in a glass ? can it not be possible to blow up do to higher temeratures?
cubanboy740 5 months ago
how much fuel ? (in liters) ?
salmasalamahmed 5 months ago
nice! now put one in the car!
Video85Man 7 months ago
It would be interesting to place this on a dyno in a car to to measure HP & Torque output I wonder if that would not negatively reflect the mixture.
Begbucks 8 months ago
Does this system cause a performence increase with the more combustable fumes?
HDLan09 11 months ago
That sounds great!...I can't wait to see this system on a car...make sure you film how all your fuel lines are disconnected, no hocus pocus stuff.
rancheroman1961 11 months ago
That's just a bubbler design, as the motor runs and sucks ambient air into the jar it will condensate and contaminate the fuel with water droplets. A true vapor design would use a sealed gas canister using a 12V fuel injector to spray fuel over a heated plate, the fuel pressure vapor alone would be enough to force the fuel vapor into an engine. the bottom of the vapor box would return the fuel to the tank via a pump. Your design is good for small engine but wont work on a car.
rancheroman1961 1 year ago
@rancheroman1961 i ran my brothers 2litre vw golf on this system today and it worked very well we drove a mile and a half got up to 85 mph then the inlet pipe broke needs some finer tuning but we are getting there i will upload a vid soon
1moeser 11 months ago
try this experiment to test gas only vs gas+water: ... fill tank half full with gas only and mark the level on the side... run for a set amount of time, say 30min to hour maybe. (time it exactly) and mark it again to show how much was used.... empty the tank and fill with 70% water-30%gas again to the same fill mark at the beginning, and without ever touching the controls. run it again for the exact same amount of time!!! and post results! even if it burns at the same speed its still a 70% gain
calholli 1 year ago
rev it pus
TheBlackirish7 1 year ago
yes ran it for one hr, it used a thimble full of liquid gasoline, no hydrogen carbons at all.
charliechopchopman 2 years ago
@charliechopchopman this is incredible, can it produce enough vapors if you open the throttle; does it keep up. You think putting an hho inline would be too dangerous? Appreciate your thoughts
iwashere512 1 year ago
did the gas last longer?
ingesumadre 2 years ago