You can take the turbo out of a Speed 3 and it's stil a fun little car to drive. You take the turbo out of a Neon and it's still a FUCKING NEON! ha ha
@AgileMJOLNIR I believe that the neon was the highest selling "car" in dodges lineup. Dodge just wanted to go in a new direction. Given it was a problematic car, the SRT4 had a good run. And in my oppinion is much better than the Caliber(I think we can all agree about that) lol.
@ojd1990 Then you should knows that the driver missed a gear. They have about the same amount of power and the srt is lighter. If you think that the speed with these mods can actually put a bus length then you should watch more vids. It doesnt make sense. Im not saying the speed isnt faster, but you have to agree that something went wrong.
All this about murdering the SRT4 sounds like BS, if u take a look at the first race, he obviously kept up until the end of 4th and even then he was still on ur bumper or even a lil further away when u cut off and the second run looked like he could get third in for a sec, other then that....that not murder, that a win but only by a car and even that, a slow pull so not something to be bragging about bro
im sure there are 400whp ms3's out there. i only know of one guy who is doing that build as we speak. but its a total engine build to get 400whp. i would say 20psi, rods , pistons, gt3071r/or76r turbo, headgasket, turboback, tuned, intake and A GOOD MM LOL. one guy on forums just built a custom external wastegate on a PG manifold for his ms3!! droooooll
nope. the most we haev seen so far is 386 crank hp. we need better tunes. our ECU are still holding us back even with cobb AP's, standbacks and piasini tunes
hey amurillo, i have injen cold air intake too and was wondering if the intake would be in the way of the piping of the front mount intercooler. in the photos it looks like it would
it doesnt get in the way. it also depends on what kind of fmic u get. i went with the exhaust depot fmic because of how the pipping was, i didn't wanna buy a SRI.
that was a typo, its actually 301WHP. my mods include Injen CAI, Corksport Downpipe, Exhaust Depot FMIC, 18 PSI w/ BCD, Custom 3" DP back. my numbers are 301WHP and 318WTQ
when we raced I only had the intake/bov/and a custom rp. Now with the fmic/dp/3" exhaust/and 18 PSI, I murdered him. The only thing that's left for me is a turbo manifold and a tune.
obviously you have a fuel pump i hope, but how about intercooler pipes,tb , intake manifold , o2 housing, fuel return line, and you are gonna need bigger injectors if you wanna run high boots safe,
i ran a 27 psi spike and you gonna need a real good tunner and a emanage, aem or direct port.hope you dont use a afc.
Dont have a fuel pump, im waiting on PTP to come out with their kit for the Mazdaspeed 3. I have intercooler pipes, they came with the fmic and I haven't heard of anyone making an intake mani for the speed 3. As for tuning I'm going with Cobb AP once I get my Cobb sri and the fuel pump.
im sorry to tell u guys but i got a srt-4 with close to 300 whp now and i have taken ever speed 3 i have encountered.. but i still want a speed. anyone in davie wanna run let me know.. sheridan and 27 sat nights.. blk srt with yellow fogs.
with my new bolt ons my speed has 321WHP. i would be glad to run you. but i have no idea where the F*** u live at so....but i think i would be a good run though.
what the ms3 have? im trying to trade in my srt-4 for a ms3.. i wanna know all the ms3 with 300 + down here i wanna know what it takes to get a ms3 to 300 hp
Actually i never lost to a mazdaspeed3 and i only have exhaust, intake, wastegate. So you let me know where these 300whp mazdaspeeds are because i would LOVE to run one.
lol. Im on my girlfriends s/n. Im too lazy to make a profile. But i would love to run you. Or any other ms3 in the florida location. I really need someone to prove to me that this car is faster then what i have witness myself.
oh dude, you are in the wrong area to try and beat MS3, there are so many MS3 down in florida that are well over 300whp. Most of the ms3 owners that I know are down in the florida area.
You can take the turbo out of a Speed 3 and it's stil a fun little car to drive. You take the turbo out of a Neon and it's still a FUCKING NEON! ha ha
AgileMJOLNIR 1 month ago
@AgileMJOLNIR Speed3 is still a mazda 3. No need to jump for joy.
seiferx8 6 days ago
@seiferx8 Dodge stopped making them for a reason. Nobody wanted to buy them.
Most people these days would take just about any car over a Neon or even a Dodge.
I use to race a 1998 Neon ACR
AgileMJOLNIR 6 days ago
@AgileMJOLNIR I believe that the neon was the highest selling "car" in dodges lineup. Dodge just wanted to go in a new direction. Given it was a problematic car, the SRT4 had a good run. And in my oppinion is much better than the Caliber(I think we can all agree about that) lol.
seiferx8 5 hours ago
@seiferx8 Ha Ha totally agree bro.
AgileMJOLNIR 5 hours ago
@SeanAxela
because racecar?
ojd1990 3 months ago
ms3 rules.!!!
ZiSk07PR 7 months ago
dude in the srt doesnt know how to sift at all sorry.
TurboSwagSRT 1 year ago
@TurboSwagSRT yup..
just13lazed 5 months ago
zoom zoom sucks !
Robgn995 1 year ago
man plz come race my srt-4 it would be a good one!!!1
CtJohnson22 1 year ago
raped..... i ahve to save up 5000 to get my dads mazda put under my name!!!
poopchunk3 1 year ago
@poopchunk3 actualy do it man!
MatthewGoul 10 months ago
@poopchunk3 How can you say raped... they went through 3 gear to somewhat get a car on him...
seiferx8 3 months ago
@seiferx8
because if you watch the second race it was more like 2 bus lengths which to most = rape
ojd1990 1 week ago
@ojd1990 Then you should knows that the driver missed a gear. They have about the same amount of power and the srt is lighter. If you think that the speed with these mods can actually put a bus length then you should watch more vids. It doesnt make sense. Im not saying the speed isnt faster, but you have to agree that something went wrong.
seiferx8 6 days ago
srt has boost leak.
gotboost1992 1 year ago
zoom zoom
ganso6969 1 year ago
All this about murdering the SRT4 sounds like BS, if u take a look at the first race, he obviously kept up until the end of 4th and even then he was still on ur bumper or even a lil further away when u cut off and the second run looked like he could get third in for a sec, other then that....that not murder, that a win but only by a car and even that, a slow pull so not something to be bragging about bro
Jbox720 2 years ago
im sure there are 400whp ms3's out there. i only know of one guy who is doing that build as we speak. but its a total engine build to get 400whp. i would say 20psi, rods , pistons, gt3071r/or76r turbo, headgasket, turboback, tuned, intake and A GOOD MM LOL. one guy on forums just built a custom external wastegate on a PG manifold for his ms3!! droooooll
courtsm3 3 years ago 2
nope. the most we haev seen so far is 386 crank hp. we need better tunes. our ECU are still holding us back even with cobb AP's, standbacks and piasini tunes
sycomantz 2 years ago
oh ok that sounds better.
Gti377 3 years ago
hey amurillo, i have injen cold air intake too and was wondering if the intake would be in the way of the piping of the front mount intercooler. in the photos it looks like it would
st0ri0ftheyear 3 years ago
it doesnt get in the way. it also depends on what kind of fmic u get. i went with the exhaust depot fmic because of how the pipping was, i didn't wanna buy a SRI.
amurillo24 3 years ago
what bolt-ons do you have to make 321whp?
Gti377 3 years ago
that was a typo, its actually 301WHP. my mods include Injen CAI, Corksport Downpipe, Exhaust Depot FMIC, 18 PSI w/ BCD, Custom 3" DP back. my numbers are 301WHP and 318WTQ
amurillo24 3 years ago
damn you made 301whp with those mods your srt must be gifted or you miss a lot on the list lol.
1bad04srt4 2 years ago
I'm the Mazdaspeed 3, the SRT belongs to my friend.
amurillo24 2 years ago
oh ok i have a speed 3 as well i traded my srt 4 it , i top out @ 317 whp and 400 tq
and a had a shit load of mods more than he does that why i said he must be really gifted
1bad04srt4 2 years ago
when we raced I only had the intake/bov/and a custom rp. Now with the fmic/dp/3" exhaust/and 18 PSI, I murdered him. The only thing that's left for me is a turbo manifold and a tune.
amurillo24 2 years ago
obviously you have a fuel pump i hope, but how about intercooler pipes,tb , intake manifold , o2 housing, fuel return line, and you are gonna need bigger injectors if you wanna run high boots safe,
i ran a 27 psi spike and you gonna need a real good tunner and a emanage, aem or direct port.hope you dont use a afc.
1bad04srt4 2 years ago
Dont have a fuel pump, im waiting on PTP to come out with their kit for the Mazdaspeed 3. I have intercooler pipes, they came with the fmic and I haven't heard of anyone making an intake mani for the speed 3. As for tuning I'm going with Cobb AP once I get my Cobb sri and the fuel pump.
amurillo24 2 years ago
uh!!!i think we are confused i was referring to the srt 4 lol.
1bad04srt4 2 years ago
Oh ok, to tell you the truth I've never looked at my buddies engine, he just told me what his car had and we raced.
amurillo24 2 years ago
right around where these fake races took place.(lol) and i do want a speed so i would love to see what you got and talk about mods.. hit me up
bigjd0420 3 years ago
im sorry to tell u guys but i got a srt-4 with close to 300 whp now and i have taken ever speed 3 i have encountered.. but i still want a speed. anyone in davie wanna run let me know.. sheridan and 27 sat nights.. blk srt with yellow fogs.
bigjd0420 3 years ago
with my new bolt ons my speed has 321WHP. i would be glad to run you. but i have no idea where the F*** u live at so....but i think i would be a good run though.
amurillo24 3 years ago
lilmama dude theres non ms3s in florida that are well over 400hp, but yes they are boosted. and have taken evos and stis.
fusek258 3 years ago
300whp?? wont take much. intake, intercooler and catback. go with a turboback, aftermarket bpv, manifold and a tune, 350whp could be possible.
courtsm3 3 years ago
what the ms3 have? im trying to trade in my srt-4 for a ms3.. i wanna know all the ms3 with 300 + down here i wanna know what it takes to get a ms3 to 300 hp
bigjd0420 3 years ago
down here! where do you live?
amurillo24 3 years ago
i live in davie.. right next to bcc.. i wanna know 300 hp ms3's unversity as you know is right by the crib..
bigjd0420 3 years ago
Actually i never lost to a mazdaspeed3 and i only have exhaust, intake, wastegate. So you let me know where these 300whp mazdaspeeds are because i would LOVE to run one.
lilmama9978 3 years ago
NEON SRTSLOW FTL
karmahunden 3 years ago
lol. Im on my girlfriends s/n. Im too lazy to make a profile. But i would love to run you. Or any other ms3 in the florida location. I really need someone to prove to me that this car is faster then what i have witness myself.
lilmama9978 3 years ago
oh dude, you are in the wrong area to try and beat MS3, there are so many MS3 down in florida that are well over 300whp. Most of the ms3 owners that I know are down in the florida area.
Alexsered 3 years ago
i run u (lilmama)w/my ms3 lol.
mjtoral 3 years ago
You should run my srt! I bet it will be a different story.
lilmama9978 3 years ago
i would be glad to run your srt.
amurillo24 3 years ago
That's wassup MS3 FTW!
throwbackkid411 3 years ago
Mazdaspeed 3 for the win all night long!!
smadamaf 3 years ago