Automatic Sprinkler Systems Explained In a Nutshell

[musicismylifebaby]

Thanks so much for sharing this, I have learned a great deal. I wanted to have one installed when we built but could see our budget affording $3500. Now I drag hoses around:-(

for now, I am trying to figure out: #1, what is the cost if I do it myself. #2, can I actually do it without royally making a mess and also, the upkeep of the so called blowing out the system.

Do you have a video on how to estimate cost, measurements and such?

Thanks again, great demonstration.

[sprinklerdaddy]

Every system requires different components depending on the size and shape of the yard, and what features you want to include. That's why we only quote on an individual basis, there really isn't a good way to do a blanket estimate based on size.

We've helped a lot of people install their own sprinkler systems, so that shouldn't be a problem. And the blowouts in the fall isn't much to worry about either.

[NAPALMJUNKY]

That was an excellent video mate, cheers!

[bhz]

Thanks, you've given me courage to finally tackle my own project.

[brizzx32]

What about a drain should that be used, you know tied into the manifold, or is it mainly used for colder climates only?

[sprinklerdaddy]

A drain is definitely an option, but you'll probably want to blow out your lines with an air compressor in the fall anyway, so it's not a neccessity.

[brizzx32]

Is a drain necessary in the box connected to the manifold, or is that mainly used for colder climate only?

[tctoy82]

Not to be rude, but you guys are ages behind places like the Cal., Ariz, TX where most people have sprinklers. Methods described here would not only be illegal but would not even work in most parts of the US. I've been installing as a Lic. Irrigator for about 8 years. 3 main points: tie-in w/ double-check, not at house. single valves (not manifolded), single strand wire, smart controllers w/ rain/freeze sensors. Only way to go to prevent major headaches down the road!

[sprinklerdaddy]

We're now currently in the process of getting in some double check systems and vacuum breakers for use in our sprinkler systems. What's the better way to go? What's required in the most places?

[tctoy82]

In North Texas, the most common backflow prevention is a double-check valve. Usually installed below ground in large 12" box w/ gravel below. Looks the best & least maintenance. A PVB vac. breaker will need to be installed above ground in shrubs or hidden if possible. Also must be higher than the highest sprinkler head on the system. Go DCV route for sure. I am a Lic. Irrigator in Tx., not sure about your local codes.

[sprinklerdaddy]

Honestly, I've never had that problem come up. If you're worried about it though, there are vacuum breakers, back flow preventers, and sealed sprinkler heads that help to safeguard against backflow.

[MYLOW121363]

what happen to the vacumebraker before the valve manifolds.

[sprinklerdaddy]

It's not a requirement here, so we don't sell many. Currently we have to special order any vacuum breakers or back flow preventers.

[MYLOW121363]

how do you keep potable water from the drinking water or any contamenants from intering the drinking water.

[Dumpski9]

thanks

[kickerboy123]

nice man