CYMA CM050A Blowback AIM AEG

[jayheuk]

How do you like the stock? Is it uncomfortable compared to a regular AK stock?

[booligan1985]

@jayheuk I actually prefer the wire stock in most cases.

[jayheuk]

@booligan1985 Thanks

[Tangibl3Fish]

Do you run the risk of stripping your piston with this gun?

[booligan1985]

@Tangibl3Fish Well, any AEG has a risk of stripping the piston. The blowback unit is piston driven, so the risk is higher than a normal AEG, but the piston stayed intact while I had the gun.

[Tangibl3Fish]

@booligan1985 Okay. Thanks.

[killhousefilms]

could you make a video of the dissassembly of the romanian aims ak47? like if you want him to see this. or not.

[booligan1985]

@killhousefilms I don't have the gun anymore, so I can't do any more videos of it.

[Marjeezus]

Does the battery go all the way inside the gas tube like other cyma AKs ?

[booligan1985]

@Marjeezus Yes

[Marjeezus]

@booligan1985 Thank you. I needed to know this because I ordered a EACustom handguard & toprail set at eHobby Asia for 20 $. It resembles the one on the CYMA, the problem though that the gas tube is too small to accomodate a stick battery (and probably a 7.4 nunchuk lipo). The lower handguard also is made to TM bodies' spec, and needs to be modded to fit a VFC type lower receiver.

[c2thedub14]

what battery are you using? the stock 8.4V? if not, any idea what the ROF is with a 9.6V? mainly concerned with trigger response.

[Coolmans24]

Is the stock removable? And what kind of battery would you recommend for it?

[booligan1985]

@Coolmans24 Yes, you can remove the stock if you wanted to. The battery would depend on the experience of the user, but overall, I'd recommend a small 11.1v stick lipo.

[oldschoolcommy]

also do you recommend this gun?

[booligan1985]

@oldschoolcommy I loved it when I had it. It's a great AEG.

[oldschoolcommy]

@booligan1985 thanks for the recommendation, once I get the one I really want to get this ak.

[oldschoolcommy]

can you take the top rail off of the gun?

[booligan1985]

@oldschoolcommy You would need to replace the whole gas tube assembly if you do, as the rail is built in to the gas tube.

[oldschoolcommy]

@booligan1985 i feared that it was. Thanks for the info man.

[cosseybomb]

@booligan1985 sorry for this stupid question but im new to airsoft does this gun need co2 or gas

[booligan1985]

@cosseybomb No, it is entirely electric.

[SportMontage]

Yo can u please do a video of you shooting something

[futurerev21]

does the bolt go all the way back

[futurerev21]

how much is this

[Madman33434]

@futurerev21 This gun can be anywhere between $200-$250 depending on if it has real wood or just metal.

[doomgarr]

Can you take the flash hider of and if you can is it counter clockwise or clockwise

[booligan1985]

@doomgarr Yes, it's threaded 14mm-

[meluvmuskpunk]

Damage*

[RiseOfThePanda]

i just got this gun and the blowback came broken

[mescalinedreams17]

@RiseOfThePanda @RiseOfThePanda mine doesn't work good, altho not quite broken... doesn't move foward all the way, never seen any1 else have this problem... did u get it from shortys?

[XXGOLDENXXDRAGONXX]

How much FPS?

[Axekura]

does this gun take ak74 mags??

[mylilgymsock1]

@Axekura no.

[Thoraxtheassasin]

@Axekura It takes any tm compatible ak mags

[Axekura]

will the blowback system break the gun pretty fast like other elec blowback guns?

[SCAR416]

What size of battery are you using in the video?

[booligan1985]

@SCAR416 I'm using the stock 8.4v 1100 mAh stick pack in it for this video.

[SCAR416]

@booligan1985

thanks much man, see around ASR ; ).....

[CommanderMick]

Read your review,

very good and thorough review, thanks.

I was wondering if you figured out the mag compatibility issue and what mags will fit?

[Axekura]

@CommanderMick i bought this gun and i guess, that umm for me,i had another ak b4 so i had other mags,i tried on the JG mag(the one that came with my other JG AK) and a TM mag,they both kinda fit the gun but it just takes some time to get used to putting them in coz the mag is a lil smaller or something so if u dont put them in well,they'll like come back out from the front while the back is still locked in.

[tkbomber]

Have this gun, it's my first stamped steel ak. I want to replace the stock, but I am having trouple comprehending the exploded diagram; it seems geometrically different than anverage TM AK. Any chance you'd post a disassembly video?

[booligan1985]

It's not a TM style stock mount, it's VFC style. I'd search around for a VFC teardown, which should point you in the right direction. I actually haven't pulled my stock off, as I haven't needed to, but I can look at it and see what I can figure out.

[MuktownSniper]

How far do you have to take it down to get to the point where blow back can be disabled?

[booligan1985]

Not too far, just enough to remove the linkage bar. Check out my review on Airsoft Retreat for detailed pics.

[Thoraxtheassasin]

@booligan1985 Umm, I went to the site and just seeing the disasembled blowback isnt enought to know how to take it out.

[meluvmuskpunk]

@booligan1985 Doesn't the blow back gradually damages the gun? from all its shaking.

[BorkaBonum]

@meluvmuskpunk

As it is a metal body I doubt the gun itself will take physical damage.

The only thing is the dust-cover wearing slightly on the piston - but usually these dust-covers are intentionally extra light. I highly doubt the blowback feature itself will wear your gun down faster than any other. 

[AlienProduce]

Nice vid and gun... .

5/5!

[dxfan212]

looked good until you said it was piston driven

[snake786123]

hi i am getting this gun and it says it is comming with a standard 8.v battery.

if i upgrade to a 9.6v battery what noticable changes will i see. and what is the names of some top airsoft chargers?

thanks

[booligan1985]

With a 9.6v, your rate of fire will go up, but that's about it. As for good chargers, I use a Kong Power KP50W smart one, mainly because it charges my LiPo batteries and NiMH/NiCD ones as well, and does a damn good job at doing it too.

[Xboxfreaky1994]

what happens if i hold the bolt while i am firing?

[booligan1985]

Don't do it. You'll likely strip the teeth on your piston.

[snake786123]

ok ill leave the battery at 8.4v

it is coming with a m100 spring in can these bee upgraded and what is the max?

thanks

[booligan1985]

It comes with an M120-M130 equivalent spring, shooting in the 400+ FPS range. It does use a basically standard V3 gearbox, so it can be upgraded however you want.

[booligan1985]

It comes with an M120-M130 equivalent spring, shooting in the 400+ FPS range. It does use a basically standard V3 gearbox, so it can be upgraded however you want.

[snake786123]

hi ill leave it at 8.4 v bt what is the mah on the battery

[paintballshooter93]

Is the gun any good?

[booligan1985]

Yes. Read my review on airsoft retreat for more info.

[booligan1985]

It's the stock 8.4v stick pack, fresh off of the charger.

[whysogrim]

Was that a 9.6v or a 8.4v, because that was pretty fast?