How to Build a Skate Box

[cocokart60]

It's called how the white tube thank you

[nukedropper77]

you should have used angle iron its like 5-10 dollars at lowes or home depot

[BLUEMONKEY546]

culdnt make it any longer culd u

[dcbreedy]

finnaly someone with pvc pipe. i have pvc pipe for coping on my miniramp, and everyones like oh thats shit, its not metal, but it slides really well,it doesn't hurt as much when you fall and its easier to put on. PVC PIPE!!!!!!!

[ComposedWriter0]

@dcbreedy i use pvc pipes for skateboarding

[12TreaL11]

cool skate box dude... :) long live bladers! bwahahah... and also, haters just hate...

[MrOwenful]

did you film this with a potato?

[Roefless]

Funny how everyone thinks it's for skateboarding.

[jonyboy169]

cool



[IwRGamingOfficial]

whys is there 2 suns? 1:51

[sportsguy831]

nice!! does the pvc hold up well with a skateboard?

[thebaldblader1983]

i say any box i've ever made is AT LEAST 16ft long that way you can actually do some switch ups or just hold a nice solid grind. good work though man. it looks heavier than my box and mines way bigger than that too haha.

[TurdLeaver]

WARNING!!!!! HE ROLLERBLADES, NOT FOR SKATEBOARDING!

[Russty318]

oh im sorry i thought you skateboarded... i know nothing about blades so my bad

[Russty318]

worst fucking box ever.. and by the way your pvc IS on top

[warnerkickass123]

@Russty318 its for blading! durr

[VictorLarsenTV]

Subscribed..

[PlanBskata69]

does pvc work good 4 grinding???

[LVskater4life]

@PlanBskata69 No!

[RightFootForward11]

when it says "how i built my box" at the beginning, was anyone else thinking forrest gump?

[4eversaintz]

1:18 sitting on the wooden thing lmao

[wakjob94]

nicw but its not rlly a box, its a grind box if ya get what i mean..

[lolagepurex]

what the fuck dude? You cannot grind ahh PVC dumb shit...

[Crazygmanful]

@ Juan si

[juanchororo]

Es un tubo de pvc ?

[nigahiga144]

that film suck

[edgar2cool]

people people this is meant for inline skateing duh skate boarders cant skate pvc

[NorthZSide]

this is a great example of how to make one!!! 2 thumbs up

[NorthZSide]

this is the SHIT,go for a record!!!!!....longest grind rail

[eminemgy22]

I just stole mine from a church. Is basically 3 2x6s 10 feet long. With angle iron. And is 6.5 inches high, and it has plywood so is smooth, and spraypainted so it slides better

[wonpichit]

why not just metal edges on the sides

[emohackerz]

attention fuck tards this isnt for skateboarding!

[lockejansen4812]

that is the gayest box soz man

i think its just too long and the copeing should be metel ?

[THiiZLAMiK]

Angle iron

[sk8kevin93]

hope u guys kno this isnt for a skateboard its for aggressive inline skating and thats why he used pvc which works great for skates

[theiverson14]

Someone told me the heavier the box is, the less it will slide away

[heyroot1234]

oo



[TheMrRodriques]

Why don't ur rails or boxes don't slide away?

Mine is sliding evertime!! Please help me and give me some ideas.!

[justsk8productions]

Hey man you should have used angle iron way better I use the bottoms of beds and they slid soooo fast to and they rust when you don't skate them but if your like me I skate all the time and ya they don't have time to rust lol GOOD BOX tho and sends you put PVC down it looks wired because they are sticking out a lot haha but o well got to give credit or you could put the top higher and I did that once to my stuff but thought I'd tell you. CHECK OUT MY VIDS MAN

[PeterGratrex]

Dirty binliners spamming up youtube with their silly inventions!

[triestoskate]

dude, i have no place to critisize, its 100 times better than i could do so im with you all the way its sick. (subscribing now)

[bxsk8tingbeast]

actually pvc is da best thing u can use asswipe it doesn't rust it wont break n da slidage iz awesome without ever havin 2 use wax unless ur a fukin woodpusher

[originalsymbol]

Yo you should throw up an annotation at the beginning that this is for inline skaters.  Some reason these dipshit skate boarders can't figure that out and think they are smart when they point out PVC doesn't work.

[neck8217]

you guys are fucking stupid if u think thats for skateboarding

[bleiiders1n]

wtf! NICEE GRIND! I WHANA MAKE 1 FOR ROLLEER AGGRESIIVVEE SAY ME HOW PLZ !

[ProudSK8Chick]

is that ur skateboard????? 3:11

[Zoowaah]

@ProudSK8Chick

haha no

[thesbto]

@ProudSK8Chick lmfao i lolled so hard when i saw it

[chavezglassworks]

@bullshitskater101012 hes a roller blader thats why he has pvc

[Zoowaah]

@bullshitskater101012

i would actually prefer longer lol

[deliverer777]

@Zoowaah That's what she said.

[truemeister09]

@Zoowaah of course you would prefer long ma man

[5ColorRice]

@Zoowaah thats what she said xD

[timandchrisfite01]

@Zoowaah prefer longer in the ass hahahahhaha

[radioactivesex]

pvc. idiot

[yourmom1993]

poser

[yourmom1993]

@yourmom1993 oh ur a blader nvm faggot then

[ch3wk0k]

that box sucks u cant grind

[Zoowaah]

@ch3wk0k

are you serious?

look at ANY of my box edits

[skaterBmxerNiocK]

@Zoowaah how could you not grind on it lol this dude built this thing good

[Blindout6]

how to you grind pvc



[150133]

This cat is more toy than a see n' say.

[Tomskatetom]

You made this harder than it needed to be.

[sk8boi2000]

Skate it

[Xonphillious]

ahaha. sick coping.

[snowboardr323]

pvc on a skate box.. bahahahahaha

[YZProductionz]

dont use pvc, use angle iron or watever tht 1.5" metal tube shit is

[IcyNit]

wait, is this for easy skating or hard skating?

[DRUMWIZ101]

wow pvc? hahahahaha

[Drummer1416]

lol u said its really heavy well maby if u didnt add soooooo much support... u dont need brakets glue screws and 2x4's to have a sturdy box lmao all u really need is like 2x4s and screws

[jorgera66]

lmao he moaned 2:01

[eXkillswitch11]

skate u fag

[ViiiBezz]

SUBSCRIBE SPAM WTF

[Austinchan077]

nice dude nice.

[RunescapeHelperss]

does this work's the same when i ride on it but with a bmx? plz answer so fast as u can

[samboskate]

don't you think it's a bit too long for a skate box?

[clk1841]

I cant find a pvc piece bigger than 10 feet long and if i put 2 8ft pieces together I cant get them to line up so if i grind across i clip the edges and go flying off. so how did u connect the 2 8ft sections of pipe?

[Zoowaah]

@clk1841

i just lined them up and had people hold them in perfectly as i screwed them in

[HeyItsCoop]

@clk1841

use a pvc coupling.

[tomburrows1995]

@HeyItsCoop dont listen to this guy , he doesnt know what its even called. (coping.)

[madmedia370]

thats a piece of crap.

[totduerot]

terribleee..

[toxicdog4123]

dude u dont use pvc pipe for copeing 

[Phazeey]

how high of the ground is that?

[GabrielsPlaceFilms]

does pvc coping work that well?

[zapper4457]

16 feet? wtf

[lifprasir]

LOLLLL 16 FEET?

[metzdorf]

the PVC look about 50mm (2 inch) diameter,

maybe 65mm max

[DudeLetMeSeeToo]

Rollerbladin FTW :D

[jmbc153108]

u look like matt cain :O

[hggik11]

can you breath

[TMerle]

He rollerblades.. thats why its 16 ft... and thats why he used pvc

[DvD0013]

Dude massive! Why 16??? I cant even grind 4 !

[BKSLrich]

Awesome...and angle iron is so skateboarders can roll when they do 50-50 "grinds"

[byellzynn]

how much it cost to make and what materials you used?

[matticus12345]

how do you skate that? its basicly a flat rail.

[guitarboi14]

thats very helpful thxns :DDDDD

[ZackyT5]

it needs to be wider

[FilmerStatus]

why did u use pvc... u spent to much on this it coulda been done simpler

[thebaufy]

omg

[PangCakeMember1]

umm plastic coping?

[PangCakeMember1]

@PangCakeMember1 sorry know i know it isnt plastic

[SteezySkateboardTeam]

get angle iron

[nateywatey1333]

ok ur advise from 1:25- 1:50 is right but u forgot that u can cut the pvc so its only a 3/4 of a circle its mor coplicated but if u make a wider box the that that is what u would want to do but i lovveee the vid and that box is fucking HUGE!!!!

[carlitox1394]

that box sucks better see mine

[gage674]

alluminum plates would work better than plastic pipes

[DrAllKnowing]

im making a box that is 10ft long 3ft wide and a foot and a half tall with metal coping on one side and a metal pvc pipe on the other ... you have a nice box as well but i think what im making is the ideal box

[DrAllKnowing]

im making a box about 3ft wide and then 10ft long with weather proof wood(which is green) then one side will have coping and one side will have a nice metal pvc so you can have a round and square rail as well as a nice manual pad and it will be a foot and a half tall so i think this is the ideal box not you have but anyway you have a nice box

[cadesboardskater]

SICK BOX..but dude the pvc sucks..get a angle iron..SOO much better

[tokebuds4201]

pvc is poop for skating and set the cooping a little deeper soo it will be like snug in between the 2 boards

[Zoowaah]

its fine how it is if i put it deeper i would roll on topsides sometimes

[justbladin93]

@Zoowaah The best pvc size is 1 1/2 inches

[Chrishaffeyboy]

@tokebuds4201 ur so stupid

[emohackerz]

@tokebuds4201 this is for fruitbooting! pvc is best for fruit booting

[TheStudman284]

@tokebuds4201 ur right

[TheStudman284]

@tokebuds4201 ur right (studman284)

[bam61074]

i would of put pvc pipe covering the top and used it for snowboarding

[SkateorDie123426]

yo i made one and it was really easy and grinds nice 5 stars

[RyanBeehler]

Stupid rollerblader

[SPITFIRE177]

dude its called using angle iron! pvc sucks

[TMerle]

@SPITFIRE177 its for rollerblading not woodpushing

[xPh4ZeAU]

@SPITFIRE177 your a skateboarder ofcourse its gonna suck

[SPITFIRE177]

@xPh4ZeAU damn i commented on this shit over a year ago. holy crap and i still remeber posting it. lol by the way... IT STILL SUCKS EITHER WAY!!!!

[xPh4ZeAU]

@SPITFIRE177 no it doesnt on blades its super smooth your a skateboarder you wouldnt know

[SPITFIRE177]

@xPh4ZeAU beezy my little brother is a blader and i blade with him sometimes. K2 skates and yes pvc sucks! metal piping works hella better!

[xPh4ZeAU]

@SPITFIRE177 maybe its better but PVC is cheaper

[SPITFIRE177]

@xPh4ZeAU ight ill give you that much.

[xPh4ZeAU]

@SPITFIRE177 maybe its better but PVC is cheaper and lighter

[21ricky666]

is that lvl on the sides?

[Zoowaah]

uhh what do you mean?

[21ricky666]

laminate wood? like a bunch of plies of hardwood glued together, itd say LVL on the side haha

but how much was that to build?

[Zoowaah]

i think it was around 200

[skateshortys8]

pvc is shit

[hondanumber8]

does pvc just break in??

[boarding5401]

i used sheet metal instead of pvc pipes it was cheaper

[Zoowaah]

im pretty sure that sheet metal is used for square coping and i prefer round so thats why i chose pvc, the pvc i used is also pretty strong

[crailtaprider628]

that stuff actually grinds real slick

[akillj01]

thats cool for you mabye but pvs sucks really back jsut get a real copping

[Zoowaah]

its more expensive and i like pvc better it slides with less wax and only thing better about metal is that you can hit it really hard and it wont break but why would i do that other than that a metal box is a pain to build

[hightstownhyphy]

this looks just like the amall one. im building this.

[brettyboybpr77]

how long did it take

[Zoowaah]

maybe 6 hours including shopping but only cause i had no idea what i was doing you could probably do it 3-4 if you watched this vid

[L3thalShad0ws7]

what if we dont use a pvc what if we just use wood to grind on? and im a beginner too

[sheeplikesganja]

you wouldn't slide very well....even with way

[habbab]

oo ok thanks!!

[habbab]

when im grinding it

[Zoowaah]

just find the thickest pvc you can find but it really won't break unless your stomping on it when you try to lock your grind (usually beginners do that when they're learning) or just trying to break it

[Zoowaah]

don't put anything on it besides wax so it slides, if you try to fill the inside with something it will probably expand in crack ummm and don't leave it out in the rain if you don't have to

[habbab]

omg!! 1 question so im about to make a prail. so im scared my PVC rail is gonna break is there anything you put on so it dosent break??

[Zoowaah]

what like when your grinding it? or when your putting it into the wood?

[ArgentinaXsocceR]

zoowaah is my favorite person i subscribed to

[BradBlader]

thanks for that!

[Zoowaah]

no problem

[valo2bmx]

nicee i gonna test to build a box like that :D