I must admit i dont like fords, but its really hard to find cons with nizpro, who else does such good drive in drive out engine upgrade packages in australia? very few if any!
i will be doing somthing similar to this but not as much power, i got BF XR6T and modding and tuning it up to 340RWKW which is 442 flywheel KW, hoping to run low 12's or high 11's in 1/4 mile, i also hav a mate thats got a F6 with 410RWKW and runs a 10.6@130mph
not jus more boost buddy d typhoon has tougher engine internals and can handle more power with ease d xr6turbo needs 2 get its engine rebuilt if u want alot of horsepower
Just a quick question: i'm a huge ford fan (still only 19 so got alot 2 learn) but does anyone know the difference between the f6 typhoon and the xr6 turbo in terms of the engines?
hey buddy i'm 19 too and here is the difference between an F6 and a XR6T
a modified FPV airbox (with Duel Ram Air intakes), higher strength conrods, larger air to air intercooler, high flow exhaust system, higher capacity fuel pump, and a Garrett GT3540 turbocharger with an external gate (up from the GT3040 on the XR6T) running 0.64 bar of boost (dont get this mixed up with psi).
Yes this for the difference between the F6 & the BA XR6T,the BF XR6T copped the full treatment as the F6 when the BF's came out,the only thing that is different between the two is the F6 runs 8psi boost,the XR6T running 6psi with a cooler half the size,and yes the secondary intake is also not on the XR6T,that is all trust me,done LOTS of research on these and own 1
The FG XR6T has smaller front wheel on the turbo which makes it spool quicker than the BF and it has 17nm less torque,unless you want brembo's get the FG you'll thank ya self.
I had the option also and bought a BF F6 TYPHOON, Larger turbo and it also comes with Brembo's, 516rwhp or 386rwkw with out touching the motor. FG XR6T just dosen't have the aggresive look like the BF F6
In the end the XR6T is still a Falcon the Typhoon is an FPV which will hold it's value more...and as u said, looks more aggressive (actually i think the BF looks more aggressive than the FG F6)
And Wholy crap dude 386rwkw ?? That's insane !! I'll be leaving it stock , will have more than enough grunt as is ! LOL
FAIL much? These are made in Australia so obviously you can. Just rock up and ask for them to make the NizPro engine for you. You won't be able to buy the cars though, as they're specifically made for the UK.
This comment has received too many negative votesshow
Shame I seen one of them on the dyno and had 2 runs. First run was somewhat 325rwkw, second run was somewhat 350rwkw, detonation and all. 400rwkw hey lmfao.
I've seen one getting around Hoppers Crossing. Looks fairly stock, except a big dirty badge on the back that says "F6 R Spec" or something a long thoes lines. Awsome looking car.
Hopefuly there will be a few more of the R specs on the road soon ? lol
Nah man those F6 RSpecs are just a line of f6 made by ford all they are are a standard bf f6 with much much beta suspensions mods and some tweaks here and there they only made 300 of them...
This comment has received too many negative votesshow
I need some more power, I have 484kW at the flywheel, and would love some more as I think that I have learned to drive it now. Would not show from my vids though, too old. Can't for a while as with a newborn I am too cheap to go out and by new tyres(pot so2's or the like) just to burn
i only know this as we have the 1st ford falcon gt-p to be exported - to jersey which are not in the EU, veiw my posts 4 proofe!. weve been 2 the nuburgring x4 and spa francorchamps once and the same for le mans bugatti circuit. (we did have black stripes on it but now blue, even more unique.) finally - very fast 155mph in 5th - more revs and then 6th! easy 180mph
What ever happened to these? Never heard about this again since this vid
MaxiTheTaxi 7 months ago
@MaxiTheTaxi Never got shipped. The only one I know got completed resides here in Perth. The owner has had nothing but problems with it though.
lolreallylongusernam 3 months ago
Comment removed
HopeIsForHeroes 3 months ago
I want it!!! How much to do this to my f6???
bdblasting 7 months ago
Comment removed
benatwill 9 months ago
Comment removed
benatwill 9 months ago
Comment removed
arronm2 1 year ago
Ford should wake up and just get guys like this to do their development work and stop being such pussies.
markdlowe 1 year ago
Going to see these boys tomorrow! yay!
WangTeSung 1 year ago
nice stainless exhaust system! got this on dvd :)
Andymuwukka 1 year ago
I must admit i dont like fords, but its really hard to find cons with nizpro, who else does such good drive in drive out engine upgrade packages in australia? very few if any!
Sefveron 1 year ago
@Sefveron Try Process West or Plazmaman.... Process West has approx 90% of the fastest xr6t's/f6's using their gear in Australia!!
benatwill 9 months ago
AUSSIE POWER!!! YYEEEWWWW
Sasse321 1 year ago
i will be doing somthing similar to this but not as much power, i got BF XR6T and modding and tuning it up to 340RWKW which is 442 flywheel KW, hoping to run low 12's or high 11's in 1/4 mile, i also hav a mate thats got a F6 with 410RWKW and runs a 10.6@130mph
jared9691 2 years ago
i want 1
fuck yea
smiffkid351 2 years ago
it is bloody nice bro add me any1 that reads this
TheF6typhoon 2 years ago
as much as i hate these cars (big, heavy family cars) i must say that these Nizpro built motors are absolutely INSANE!!
marek0086 2 years ago
Did this ever happen ? I also thought nizpro said this car would be tested on UK TOPGEAR ?
Does anyone know ?
fordbaxr8 2 years ago
he really knows wtf he's talking about
zaim69 2 years ago
of course he does!... its Mr. Nizpro himself!
marek0086 2 years ago
so what would be betta getting? a bf xr6t and modifying it. or just buying a typhoon? in the end which one would u save money on??
GYMJUNKIE187 2 years ago
typhoon would be the way to go it costs less to mod it
eg valve springs
heavy duty ones are already installed
Magnus016 2 years ago
yeah would suck for a major engine prob to go wrong while in the UK..having to get parts imported then having someone who knows the engine fix it
GreendragonDMX1 2 years ago
not jus more boost buddy d typhoon has tougher engine internals and can handle more power with ease d xr6turbo needs 2 get its engine rebuilt if u want alot of horsepower
emrea121 2 years ago
Sorry mate, the BF's got the same bottom end as the typhoon. F6 just has a larger intercooler and runs more boost.
bloggs24 2 years ago
can they be exported to the USA yes or no
210gumby210 3 years ago
Just a quick question: i'm a huge ford fan (still only 19 so got alot 2 learn) but does anyone know the difference between the f6 typhoon and the xr6 turbo in terms of the engines?
BJR1st 3 years ago
As from 06/06 the XR6Turbo has the exact same engine as the typhoon. Just running less boost.
ricecustard 3 years ago
Oh cool. Thanks 4 that
BJR1st 3 years ago
ohh sweet as mine has a simlar f6 engine mines a 07 xr6t :)
falcon96kickass 3 years ago
hey buddy i'm 19 too and here is the difference between an F6 and a XR6T
a modified FPV airbox (with Duel Ram Air intakes), higher strength conrods, larger air to air intercooler, high flow exhaust system, higher capacity fuel pump, and a Garrett GT3540 turbocharger with an external gate (up from the GT3040 on the XR6T) running 0.64 bar of boost (dont get this mixed up with psi).
2251quickmx6 3 years ago
Sweet. Thanks for that mate :)
BJR1st 3 years ago
Yes this for the difference between the F6 & the BA XR6T,the BF XR6T copped the full treatment as the F6 when the BF's came out,the only thing that is different between the two is the F6 runs 8psi boost,the XR6T running 6psi with a cooler half the size,and yes the secondary intake is also not on the XR6T,that is all trust me,done LOTS of research on these and own 1
BAwithBALLS 2 years ago
Ok , got a question for ya BAwithBALLS,
I'm going to buy either a BF Typhoon or an FG XR6T Auto.
They both have the same Kw (the Typhoon has a tad more torque).
They are both in the lower to mid $30,K's...
The Typhoon looks way tougher but
I will get new car warranty on the XR6T.
What is the major difference between the two ?
Thanks :)
billybodybuilder 2 years ago
The FG XR6T has smaller front wheel on the turbo which makes it spool quicker than the BF and it has 17nm less torque,unless you want brembo's get the FG you'll thank ya self.
BAwithBALLS 2 years ago
I reckon the FG should have descent enough brakes anyway . propably won't notice a meazly 17nm less torque.lol..
.i don't circuit / street race etc...The fuel economy looks great for a large family car with power when you need it for a safe overtake etc..
Just waiting to sell the XT...
Will post vids when i get her.
Thanks for the info :)
billybodybuilder 2 years ago
no worries matey,good luck with the purchase and make sure you keep on top of maintaining her regularly,thats the key to a long life out of the car.
BAwithBALLS 2 years ago
I had the option also and bought a BF F6 TYPHOON, Larger turbo and it also comes with Brembo's, 516rwhp or 386rwkw with out touching the motor. FG XR6T just dosen't have the aggresive look like the BF F6
Just my 5cents worth :)
fordbaxr8 1 year ago
Good 5 cents worth tho mate ...
In the end the XR6T is still a Falcon the Typhoon is an FPV which will hold it's value more...and as u said, looks more aggressive (actually i think the BF looks more aggressive than the FG F6)
And Wholy crap dude 386rwkw ?? That's insane !! I'll be leaving it stock , will have more than enough grunt as is ! LOL
billybodybuilder 1 year ago
I would love to clarkson or hamond take one of these out for a spin. I think it would blow them away.
fordfalcon01 3 years ago
can you get them in aus? i assume you can.
andy65656 3 years ago
where do you think there made dickhead
MattYbOi177 3 years ago
FAIL much? These are made in Australia so obviously you can. Just rock up and ask for them to make the NizPro engine for you. You won't be able to buy the cars though, as they're specifically made for the UK.
Legothunder 2 years ago
thats what i was getting at cause i want the interior as well
andy65656 2 years ago
at least now the uk will have something good for a change ,not the hatchback homo-mobiles
fairlaneguy82 3 years ago 9
Ive seen a few commodore SS's in Dublin but havent seen any xr turbos yet.....hopefully i will!
ausdublin 3 years ago
This comment has received too many negative votes show
Shame I seen one of them on the dyno and had 2 runs. First run was somewhat 325rwkw, second run was somewhat 350rwkw, detonation and all. 400rwkw hey lmfao.
ybuzz4 3 years ago
nizpro should keep modifying fords because there good at it i wonder if there going to modify the fg
mounirraad01 3 years ago
who knows where the 200sx's that nizpro built..350rwkw and street legal..if anyone has one put something up;)............
fabglein 3 years ago
I've got one, great thing :)
faste000 3 years ago
yeah right....put something up then!!
fabglein 3 years ago
yeah put something up i wanna see one
andy65656 3 years ago
What can i say..... WOW!!!! Must have one!!!!!
dragonpnut76 3 years ago
I want one! The Aussies really beat the US at their own game when it comes to building a muscle car!
Thoooooms 3 years ago 8
look at my comment on the other page, they wont beable 2 make it happen...
joemcevoy2 3 years ago
I see one of these getting around Melbourne.
DUMPTBA 3 years ago
mad wish i could afford one
DUMPTBA 3 years ago
sweet how much are one of these for aussy market
MadazRx8 4 years ago
retrimmed interior?? looks pretty stock to me.
kingcrumpet 4 years ago
as the video said, its re trimmed with connelly leather
elghia 4 years ago
i have heard this project fell through, can anyone confirm whether this whole project has been cancelled or not?
FireArc 4 years ago
I own one of these and they are a weapon 407rwkw.Thanks Simon and the Nizpro crew what a car
F6mifoon 4 years ago
I've seen one getting around Hoppers Crossing. Looks fairly stock, except a big dirty badge on the back that says "F6 R Spec" or something a long thoes lines. Awsome looking car.
Hopefuly there will be a few more of the R specs on the road soon ? lol
Playtechy 3 years ago
Nah man those F6 RSpecs are just a line of f6 made by ford all they are are a standard bf f6 with much much beta suspensions mods and some tweaks here and there they only made 300 of them...
devilsusher 3 years ago
anyone know the company in the uk thats selling them? not dreamscience tho?
xrfil 4 years ago
spins the wheels in 5th gear at 220km an hour, holy shit
castle001 4 years ago
Can you imagine how feaky that would be??? I would wet myself if that happened!
thewitabike 4 years ago
This comment has received too many negative votes show
I need some more power, I have 484kW at the flywheel, and would love some more as I think that I have learned to drive it now. Would not show from my vids though, too old. Can't for a while as with a newborn I am too cheap to go out and by new tyres(pot so2's or the like) just to burn
mrmarvelus 4 years ago
fuk yea! show them poms wat FPVs are made of!!
Moqawame 4 years ago 3
im sorry, this is wrong,
EU regulations mean that the ALL lights need to be removed and replaced with E numbers on them. a rear foglight is also needed.
joemcevoy2 4 years ago
i only know this as we have the 1st ford falcon gt-p to be exported - to jersey which are not in the EU, veiw my posts 4 proofe!. weve been 2 the nuburgring x4 and spa francorchamps once and the same for le mans bugatti circuit. (we did have black stripes on it but now blue, even more unique.) finally - very fast 155mph in 5th - more revs and then 6th! easy 180mph
joe
(dad owns the falcon)
joemcevoy2 4 years ago
I've seen some pics of an FPV at Nurburgring ... now I know
loopism 4 years ago