Airsoft GI - G4A1 Stress Test

[airsoftalex100]

keep pressing 3 lmfaooo gay laugh

[TheOnlyRiktor]

I cringed each time he dropped it.

[PaxtonRamsey]

i like how he says for the 9 foot drop, "what happened there something fell"...... hmm i wonder haha

[magstrike105]

@PaxtonRamsey that was the buttplate... fail

[mansour86421]

i love how he sounded surprised when it ddnt break!

[shane4121928]

why would you ever purposly drop something with the eagle globe an anchor on it? this makes me a sad future Marine lol

[pwbaseball260]

@shane4121928 lol future devil dog here too. im gonna go officer

[SuperFinnish]

@airsoftcqbmaster55 This is based on the G&G sportline/combat machine series which have sub-par internals compared to many other guns in its price range.

[MrUSMCsniper1]

I think this is how the sales department gets back at the manager for lowering their salaries 

[AT4ROCKET]

what I want to know is, did the barrel bend. the gearbox and reciever I am not worried about nearly as much. but did the barrel bend.

[FunVanDriver]

@AT4ROCKET I'm pretty sure the barrel didn't bend.

[AT4ROCKET]

@FunVanDriver I've seen it happen where the barrel just SLIGHTLY bends. JUST SLIGHTLY ruining the inner and outer barrel, it happened to my classic army M4, and that had a G&P steel barrel on it, sure it still shot, but when i went to clean the barrel, I couldnt take the inner barrel out without vice grips.

[AxillaryGrenade]

what kind of knife is that in tim's pocket?

[0726Phoenix]

The internals suck... Mine broke after 2 skirmishes using their ammo

[mrpandamonium242]

drop it off a roof please

[1991jarhead]

this gun truly deserves to have the eagle globe and anchor on it

[evilbunnyreviews]

What knife is that in your pocket tim?

[airsoftenforsers]

got i could never get the stupid crane stock but pads off finally a solution

[gatrsrul213]

are the internals metal someone please reply and like is the gear bow metal is the piston metal motor all that

[AwesomeSauce64]

Would this work with any of your plastic line g4's?

[bkshizzle1]

@AwesomeSauce64 all the G4s are plastic

[Crazyairsoft1000]

I would cry if my custom gun fell from that hieght!

[eddyfreddy675]

So at least I know how to get the fucking butt plate off.

[Snapshot290]

@eddyfreddy675 if you wiggle it it comes off, that stuff where you push the clamps in makes it 50x harder to do.

[eddyfreddy675]

@Snapshot290 So If you just wiggle it around it will come off? Do not push the tabs? I am talking about the tough G&G crane stock on G4's

[Snapshot290]

@eddyfreddy675 yes, its still not easy but its a bitch any other way. I think there are a few reviews where people do it.

[0mgwtfbbq21]

i died a little when he dropped the gun

[DevastatedX]

you guys should throw it at the ground see if it breaks then

[ATairsoft034]

such a beautiful gun

[suckmycakmofo]

nice tool shirt!

[trainfreak7745]

where is ur store

[socalairsoftr]

o it didnt break yet we will just drop it from higher its only a 200$ gun

[socalairsoftr]

o it didnt break yet we will just drop it from higher its only i 200$ gun

[Chiliplease]

nice tits

[AdamtheNinja1]

Finally! A solution to getting the stubborn battery cap off!

[LMAO433]

there's no cracks or anything....drop it again:D

[LMAO433]

there's no cracks or anything.....drop it again.

lol

[LMAO433]

there's no cracks or anything.....drop it again.

lol

[gamemaster1199]

@Snapshot290 i dont think you understand the difference between a shitty quality gun from megastore vs ASGI, airsoft gi is a PRO shop, not a beginner like megastore. and the accessories are to show how customizable the gun is. no gun comes with a load of attachments that are high quality

[FunVanDriver]

@Snapshot290

Are you on crack? I've saved more money on Airsoft GI than anywhere else, maybe because I use the coupon codes that can be found... I don't know... all over the internet? Also in the product descriptions it clearly says; so and so IS NOT included with the product. They do that to show you what you can make the gun look like.

[pwbaseball260]

@Snapshot290 their shipping takes FOREVER and their warranties are very limited. also, everything is out of stock. i'm waiting on a g&g combat machine now. it took all 4 days to process which is rediculous and then it didnt leave the store for another 3 (no it wasnt even a weekend)

[WeAreTier1Airsoft]

@Snapshot290 The JG m4 is full metal with a metal body you can get one with a plastic body for about 150...

[mipyman2]

@Snapshot290 that would be ok if there prices were really that high....

[PerryOpsAirsoft]

@Snapshot290 The one 250$ JG M4 is a Full Metal Version.... Thats why its 250$

[LEGENDARYGAMEZZ]

@Snapshot290 hahahah dumbass! There cheaper then any other site! and if you knew how to read you would see that they were selling the FULL METAL version for 250 not the plastic crap version. And if you don't have enough money for a 250$ airsoft gun get a G&G not a JG.

[rhinogek]

play 0:42 over and over again

[Carplon]

What's the rate of fire on this with a 9.6v 1600mah nun chuck?

[AirsoftGunsAndBbGuns]

@Carplon like 18rps or 1050 rpm.

[kclantier360]

at 0.34 he has a knife in his pocket

[wattapassa]

hahah i was listening to tool while watching it

[SmallTimeShred]

Hey! I have that tool shirt too! but it fits me...

[collieoVTEC]

@SmallTimeShred you should of put, i have that shirt to, looks awful on me too.

[chrisizazn]

instead of dropping it from 8 feet you should mail it to me :D

[chrisizazn]

instead of dropping it from 8 feet you shoud mail it to me :D

[0726Phoenix]

My upper receiver cracked on my Mod 0 after a fall of about 3 feet, which just kind of made me mad. It still fires on full auto but not semi and has a large crack that wobbles on the receiver.

[hillbillybob93]

gun abuse haha

[deathslayer101]

I like tim's shirt.

[footballmike56]

tht broke my hart now i cant look at u jk dat was sick

[MUSwmwLEE]

hey guys what are the differents between these two ?

M4A1 2GX - G4-A5

and which one is better ?

[Raveson279]

I agree with whoever said, " We should have took off the Magpul sights."

[Airsoft109z]

Does the G4-A2 Flaming Hog perform the same in durability? (being dropped.... stress tests...)

[Airsoft109z]

NO CRACKS. DROP IT AGAIN!!!

[primusantipop1000]

that guy is wearing a TOOL shirt i have that shirt lol

[CommunityTroll]

im not buying from airsoft gi EVER º-º

[1H1TSN1P3R]

lol dont try this at home

[farty555]

a lot of asians

[bbii125]

@nbomb000 haha that was funny

[nbomb000]

try throwing it at some one to see if it hurts

[bbii125]

You spelled hick not heck

[irel3ntless]

how old do u have to be to get a job there and where the hick is airsoft gi located

[PSNjcc03]

I would have taken It!

[Snizzlewiz]

Nice Tool shirt! I have the same exact one.

[MrToxicJesus]

Nice Tool shirt Tim!  I have the same shirt =D

[dragonknife3000]

awesome

[blizzard249]

that is 1 nice fucking job u got there

[Jdlayton1]

i know what im getting

[bulldog1010123]

i have that same Tool shirt...

[Legionnaire8888]

wait, is this g4 full metal or plastic? really tough gun either way.

[reviathon360]

That could've been my gun :(

[ihazafunny]

@seniorkickyourass

It is an electric powered gun. Can u remember what water does to electricity?

[seniorkickurass]

@ihazafunny its powered by a battery dip shit, water only affects direct electricity from like a wall outlet, not batterys, go on youtube and look up airsoft gun in water, and think b4 u make stupid ass comments

[ihazafunny]

@seniorkickurass I was talking about the point where the battery is connected to the motor and where it is plugged into the gun. Water conducts with the metal and then shorts out the gun. AEG's only work in water if they have a tight water seal around the connection point. Don't be a troll and calling me a dipshit

[FakeProps]

at least it wasn't halo 3 :)

CURSE YOU BLEND TECH!!! (will it blend)

[therockguitarist96]

u make good vids but for this one i can only ask: why?

[seniorkickurass]

hey tim i got a suggestion, why don't you do other tests like maybe weather tests, like submerge it in water then take it out and fire it, and put mud and sand on it and see what happens, just a suggestion but i think it would be cool if u tape it and put it up on youtube

[CaptainFysh]

Well, we want to see the limit to it.

[shoua7]

I don't care HOW they dropped it or on WHAT. They did 2 tests from a pretty good height, and it stayed intact. That's good enough for me. You guys really are intent on Tim breaking that gun, aren't you?

[KatonicProductions]

Hundred Bucks says they sold it

[HolyH4ndGrenade]

Try dropping it with the mag in it and actually on a weak spot, rather than on its side... *rolls eyes*

[TheMrairsoftpro]

does the g4-A3 have like the same rof plz comment before i buy it tomarrow

[namegoeshere1000]

How do you get this kind of job where you work around airsoft guns all the time cuz i love airsoft and id like to have a job related to it. Please help! :)

[kbckiwi]

now drop the gun in the water with the battery and some BB's atke it out and check if the gun keeps shooting...

[swatlover16]

lol.......... Dont try this at home.................. because your not getting a new one. these things are to reliable to worry about that in truth though. YOU RULE AIRSOFT GI.

[kpgpwi64]

yeah tool

[BLOPINTOSH]

should i get the Flaming Hog or the Blazing Hog PLEASE TELL ME WUICK

[GangsterFrog65]

I would get the flaming hog because the blazing hog is out of stock. even if it was in stock i would get the flaming hog

[thriller981]

1:01 - 1:01 "full auto that shit' lmao

[airsoftdelta1]

drop it on the barrel or the stock, that is more likely how you will drop it and do it on a hard floor not carpet

[XDemonRoxasX]

D; i think my heart just stoped 0:13

[dongochu]

never mind lol he said it was plastic

[dongochu]

is this g4 a1 the plastic body one?

[CantonAirsoft]

it stayed intact

[QualityAirsoft]

wat about feeding?

[onslaught147]

next test... off the roof ;)

[iAirs0ft]

how do you take off the crane stock!!!

[kpw528]

@iAirs0ft You dont have to take off the crane stock. I'm assuming you're talking about taking the battery out, right? Just pop the rubber buttplate off, then pop the cap off the rear of the stock, then unplug the battery. Hope this helps.

[ysakoko]

that hurt just watching it

at least I have confirmation that the gun would be ok after using it as a club

[y2jshit]

how about dropping it on cement on 8 feet see how it does ????

[Atwood696]

dude another amazing tool shirt =D

[airsoftowns233]

im getin this amazing gun hah

[foroke1]

You should try dropping this at different angles, the way someone is most likely to drop it.

[bugs9410]

what the fuck does it matter what knife he has this is about the durability of the gun u dumbass

[nigahiga001010]

is that knife in your pocket a strider?

[fakeham]

that thing's pretty resiliant, wish my gun was that durable.

BTW, nice shirt

[iAirs0ft]

can u take off the flashider, NOT the barrel?

[Asianator94]

they should have done this with an ak

[darkendless3]

yep they sold it

[Vinagain94]

I bet they sold that gun...

[AIRSOFTGIdotcom]

It's actually on display in the showroom.

[fickdazualle]

@AIRSOFTGIdotcom just told him off

[HDairsoftTV]

@AIRSOFTGIdotcom Is that the one that is currently missing the charging handle? Because I held that one in the shop today

[franklin9500]

@AIRSOFTGIdotcom lies

[collieoVTEC]

@AIRSOFTGIdotcom sure.....

[darkerik411]

@AIRSOFTGIdotcom I NEED TO GET THE DISPLAY VERSION

[XxMathu242xX]

@AIRSOFTGIdotcom ^LOLZ

[HapDoSoolCool]

@AIRSOFTGIdotcom haha thats funny

[CKEvideos]

@Vinagain94 fuck you

[gcmsboy1234]

After video. "Alright pack this up and send it off"

[Delta501st]

Apparently the staff at airsoft gi has a lot of time on their hands.

[mxfrmbarsspbdsrtrver]

drop it again. ITS NOT BROKEN!!!!!

[OLRairsoft]

wow hey are the g4 series lipo ready?

[stapler1212]

yes

[whathefuckshdmynameb]

i got the same shirt as you, tim

[DaKamodo]

Nice tool shirt

[acemack2]

drop it  on the stock ant the barrel then see if it works

[tom2215]

exactly what I was thinking

[cowluver15]

Haha, "Full auto dat shit". Best quote yet, after "My Eyes are so Chinese with these lights". Lol

[fridgegnome]

Will this gun work off a 10.8v

[Brawlover2895]

yea they put a 11v and it still worked

[fridgegnome]

Cool I am ordering the CM in a min

[fou18]

"That's how we do" XD

[gymfreak0]

where you film these vids. i went to the airsoft gi store in la and i live the shop, but i was jw where you stoot the vids.

[Everybodylovespeace]

as good as my jg g36c is, i think i have to get this gun

[midgetfromhell]

hahaha "drop that shit again"

[xkakashix12]

haha i see a G&G CM m16

[ARX7ARBALESTZ7]

carpet floor or concrete?

[PhilipK73]

Hard carpet flooring.

[neverblameme]

SO much gun in the background, i want them ALL they look so Good

[memkills]

idk why u guys are worried about the stock chipping... first of all it can be super glued back prob and sec.. you usually dont drop it on its stock aynways... but its alot better than having to replace the metal body and the handguard...

[TheRomanCandle790]

ok... the buttstock cover fell off yes I KNOW THAT! but o the crane stock (the adjustable part) chipped so STFU your wrong!

[stephanolmedo92]

be nice to tim:(

[TheRomanCandle790]

lmao im not blaming tim im just saying he missed it...

[stephanolmedo92]

haha its all good man.

[shoblob]

i dont see the chip from the stock

[mrhopsalot]

haha, theres no cracks... drop it again

[ichewtoast111]

you should do this with the echo 1 g36c i bought from you guys. ive droped it plenty of times and it still works :)

[TheRomanCandle790]

look closer to the crane stock on the part that is able to move...

[TheRomanCandle790]

the stock chipped though!!

[Xavnorris]

Chipped? That was a butt plate...

[TheRomanCandle790]

no it was on the crane stock there is a chip

[XxAsainPwnagexX]

....no dude it was the butstock cover

[ddrummer1]

hook it up to a car battery see how long the motor/gear box lasts

[stealthstrudel]

well thats it. i'm getting one

[Ontask28]

How about a stress test when you roll it down a set of stairs? that isn't uncommon and is really tuff on alot of things actually.

[SirRailton22]

Man I wish I had your job.

[cenadx111194]

haha stop at 1:08!!! they're cool!

[PoisonedSorrows]

watching that fall makes me want to cry

[nickrowe4584]

hope you guys didnt put back in the box and give it to a costumer. lol

[ChunkyMilkProduction]

drop it on the barrel

[jackjackmuffin]

are any of these airsoft gi gus water proof

[artimus113]

OH THE HORROR!!! A beautiful machine dropped twice!! but it is pretty cool how it stood up to such a beating. nice job you guys, very solid work.

[sk8ing667]

im saving for one of these, may I recommend a package that includes a battery/charger and maybe a scope to boot? That would be heaven. Oh, are these Li-Po ready

[shift9303]

These things are SOLID. I spent a little bit of time with my friends model and it gets as good of a performance as my G&G SCAR proline model. Obviously they cut out alot of money on the external elements of the gun, but hey its the performance that matters right? Oh, and if you get one, don't you dare run a 8.4 on this thing, 9.6 are the only way to go. Fire rate goes up dramatically as well as responce time going down.

[bigboss5251]

Drop it from the barrel!LOL

[Herbymac0811]

A 9ft gravity test ?

And it still worked ?

I'm getting one right the hell now !

[907carlover]

I was more distraught when i saw u guys hold that thing that high up then when micheal jackson held that baby out of the window! thats so impressive, ur guns rock!

[dh5567]

OMG I want one :[

You guys are really confident in the G4s if you're dropping them from 9 feet.....they must be good. I WANT

[BlazerTheAshbringer2]

that or they got alot of disposable income

[xHOTFUZZxFTW]

I'm getting that gun