Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (130)

Sign In or Sign Up now to post a comment!
  • What's the fps with lipo !??!?

  • @JojoH5615 The battery has no effect on muzzle velocity, only rate of fire.

  • lol lipo can't kill the p90, p90 can kill the lipo :D

  • you could have just sent it to me,

  • holy frick mail me the fukin gun and i will use it and not try to break it!

  • use tape to hold the trigger

  • what does it change the fps to?

  • Um... Why are you trying to break it?

  • Strange. With my G36 vith 11v lipo i have a rof of 20bb/s. I have broken a plastic piston and now using a new one, all metal.

    Metal GB and metal gears.

    High torque classic army motor.

  • i agree hook it up to a car battery!!!

  • DUDE! Im buying one of those and putting a 20v lipo in it!

  • Are you guys dry firing? Dry firing is the quickest way to kill any gun :P

  • Nice fire rate! I have a Classic Army p90 sportline and it came with a 8.4v. I don't dry fire and mostly fire on single. Is it dangerous or can it wear out the gun electronics/mechanisms if i change it to a 11.1v Li-Po?

  • did you see the one where the guys put 15.45v in the well p90 thats pretty freaking awesome

  • throw an m100 spring in there and see what happens, doubt it would last on even that little spring.

  • im not surprised that it outlasted a CA m4, classic army is a overpriced peace of crap

  • 2:26 lol

  • holy shit!!!

  • An 11.1 will wear your gun out much faster though. I know a friend who melted his safety switch with a 9.6

  • all a lipo does is makes your gun run faster, any gun can handle a lipo, its just a matter of how long the piston and gears will last, piston will break down after a while, but they do that from any battery whether its an 11.1 lipo or an 8.4v nimh it doesnt matter, its just a power source

  • What's the current on that LiPo? 1200mAh? You add a deans plug to it?

  • if it was a good gun with that battery it would become a great gun xD

  • wow

  • epic lol

  • LOL. Most people pay 400$+ for 280-310fps hi rof set ups... But the rof doesn't match this. And the guns die quicker.

    This makes me want to put a systema high speed into one of these.

    I might get one of these just for the lipo lols./

  • wats the range

  • Isn't it a bad idea to overdischarge a lipo?

  • won't that kill the battery tho?

  • Reminds me of Toyota. You can't kill Toyotas, and you cant kill that gun. Instead of the gas pedal getting stuck, the trigger stuck. Kidding, I love Toyota!

  • Hahahahahaha funny shit

  • i have one i like it. only got it for CQB only

  • Solder a goddamn car battery to that thing!

  • Good vid but wht a waste! U shud have saved it as a secondary for a sniper! Tisk tisk

  • y waste a good p90

  • Good P90? Where? All I see is a Firepower P90. If I want good I'll pick up my Echo 1 or friends' TM models. This gun is junk.

  • @Crunchmeister agreed, my friend has an echo 1 p90 and its great

  • Nice Mini Van!!! HAHA

  • its insides are better than lpegs

  • LPAEG's have a crappy motor, that can only spin so fast. emaning, you could hook up a 14V to that and it wouldn't fire any faster. plus, there's not much stress on the gears as the spring is low powered. an AEG has alot more stress on the gears, and a much better motor that's max spin is alot higher, meaning its more likely to spin the gears fast enough to actually strip the piston, or the gear teeth, depending on whether the teeth on the piston are plastic or metal.

  • @c2thedub14 exactly.

  • most stock guns would die before this.

    what a disgrace.

  • lol i have the r-9 p90 ... exactlly the same as the firepower one, and as i say, its damn good for a budget gun lol

  • That's great!!!

  • there's a safer way, get two bricks to hold it up and then zip tie or tape the trigger down lol

  • ahh .. a classic video .. we tried to kill the CA P90 using our Polyquest 50C 12.8v Li-Poly batt .. and we sucessfully did it .. but it made my batt into low battery .. hhhaha

  • it smokes cause its melting your gearbox

  • go and get me a coffe ahaha classic! this video is awsome!!!!

  • I used to have one of those. Once it's gears stripped, I took out the motor and switch assembly and built a battery discharger.

    I must have put over 30 hours of run time on it over the 1 year it lasted before the brushes burnt up.

    RIP, my poor Well P-90. Your death extended the lives of many of my batteries.

  • @Jim27x hey i just bought my Well P-90 yesterday, how long do u have to charge it?

  • To calculate charge time for any battery, take the battery Mah and divide it by the charger's Mah output. That gives you the charge time in hours.

    ...or until the pack gets slightly warm.

  • THX!

  • hahaha thats a $32 gun XD

  • i know that echo 1 is a nice brand and i know that u said kwa was really the only one. how long do u think an echo 1 ak47 by vector arms would last?

  • i would say about 200-1000 rounds then the piston would brake off or gears.

  • @ericandjakek To be honest, running a 11.1v Li-Po on the Echo 1 AK47 Vector Arms wouldn't be a good idea at all. If you did choose to run it, I would say maybe a month before something such as the piston would strip. It's really not worth it, you can get a really nice, realistic ROF from an 9.6v or even an 8.4v battery. With an 11.1v Li-Po, we're talking over 21 rounds per second so it's not going to be doing anything healthy to the gun long term.

  • Just to add to that, If you really want to use a Li-Po then you could use a 7.2v and it should be fine. However they burn the trigger contacts out much faster than a standard NiMH or NiCad and you have to be much more careful with them.

  • Alrite. Thnx for the info. I doubt I'd spend the $40 or watever on a battery anyway. I'm sticking with the standard 8.4V 1500mah. I got 3 of those so once again thanks for the info.

  • Yeah, no problem. If you have 8.4v batteries already then you should use them. They give a pretty good ROF and all guns can take an 8.4v as standard. Happy Hunting :)

  • If it is new than you could get like 15,000 rounds at leas( only if you take it easy on the trigger time). I know a guy using a 12v 4200mah battery on a jg and he has gone through 20,000 bbs and still going.

    But I highly advise sticking to a 9.6v battery for echo1( it will last much longer)

  • firepower is secretly the most durable brand xD

  • i have a metal gear box in my ak47 so is it lipo ready?

  • No. All good AEG's have metal gearboxes, but it doesnt mean they are 'Li-Po' ready. The only manufacturer that make 'Li-Po Ready' guns out of the box are KWA. Even though KWA's can handle it, many people don't recommend Li-Po's. They put higher stress on the internals and burn out the trigger contacts faster. A 7.2v Li-Po would be ok to run in most AEG's as it gives approximately the same ROF as a 9.6v NiMH or NiCad. However the term 'Li-Po' ready usually makes people assume 11.1v Li-Po's.

  • it might, but it wont last that long

  • helllllllllllll no your gear box will die

  • LOL that gun has fired more times than I have shot in my whole life.

    and since when did Firepower make a p90? XD

  • Correct. Not because a gun CAN take LiPo that it will LAST using it. You're putting heavy wear and tear doing that.

  • uyou guys should try to breach an old door with it and see how long the gun lasts then, or just bust out some car windows with it.

  • next time you guys should try to hook it up to a car battery... that would be epic

  • HAHAHAHA

  • @jeme223 Haha, it wouldn't be different because each cell in a lipo charges up to 4.2 volts and are basically dead at 3.7 so a 3-cell lipo thats fully charged is over 12.6 volts. It would be fun to try though haha.

  • @jeme223 they did

  • @jeme223 Done. Look at my newest video. We connected it to a cat battery.

  • @Crunchmeister

    cat battery? o.0

  • @Crunchmeister Cat battery?????? lmao

  • @jeme223 LOL

  • and yeah, this thing is junk. i don't care who bought it and thinks it's really shiny. it's a piece of junk that deserves what this dude was trying to do to it. bring that with you to an airsoft match with me, you will get owned.

  • i'm pretty surprised how long that junk lasted for. it should have a way higher rof with 11.1v lipo though. that didn't seem to be higher than low 20's.

  • u guys must hav a llotta money to break a gearbox on purpose

  • It's a piece of junk $50 gun that never worked right from the day it was bought. If it were mine, I would have used it as a target to shoot my good airsoft guns with.

  • doesnt even sound that fast

  • best video everxD

  • the first day i got the gun i burnnt out the motor with the battery it came with it had a bad motor

  • strong lil fucker

  • those guns are cool but clips are small

  • 300 bbs is small?

  • the good ones have like 70 round clips thats why i didnt buy one

  • wats the fps on tht model

  • around 280, or at least thats how it felt on bare skin lol.

  • is that the R9 ?

  • lol, i just ordered one of these from kapowwe for $15. For that price why not?

  • i sent them an email, trying to ask stuff, so, how is it durable or cheap? and how is the firepower?

  • surprisingly, its really not that bad. It can hold its own against my classic army p90. Also it can take the CA mag and vise versa. Its shoots around 280fps with .20s. and the mag comes out it isnt hopper fed. And the gear box is a combo of metal and plastic. But I fired 4 shots and the safety jammed up, I just opened it and removed it, lol. Its accurate enough. Plus I got a new battery for my JG G36c and its a decent battery, they share the same one. For $15 go for it!

  • oh thanks so much, im def. going to buy it. whered u get it kapowwe? i love firepower too cause i have 2 firepower m9's , theyre very sturdy and durable. thanks once again

  • yea, i got mine from kapowwe, I love that site. and its my first firepower gun and so far I'm happy with it. If ur safety gets messed up just message me and I'll make a video on how to fix it. Also it seems very sturdy.

  • ok well i just bought it and the guy who made this vid, from what he says, it doesnt sound too good?

  • well these guys probably put every dollar they have into airsoft, so they can do better.

  • how much did you pay for shipping?

  • it was another $15

  • yeah i know!!! same here in nj!!! i thought that was a ripoff

  • still u payed $30 for what shouda been $90, so ur still gettin a deal.

  • yeah they say "woudlve been 90" but if they can still sell it for 15 and make a profit... i laugh

  • hey..i ordered it friday and i didnt get an email saying its been shipped and its tuesday... what gives

  • Firepower ANYTHING is junk, and this P90 is easily the worse airsoft P90 on the market, bar none.

    The gearbox and gears are all plastic. The only metal parts are the spring and the electrical contacts.

    It shoots about 230-250 out of the box, and after about 1000 rounds when the spring settles, it shoots about 200-220.

    There's no hopup, so your BBs hit the ground about 50 away at most. Accuracy is horrid at best.

    I've compared it to both TM and Echo 1 P90s.There's no compaison. FP is junk.

  • Also, mine does have a hop up on it. Also the fire rate is faster than my JG G36c. Mine is not hopper fed, and could take the CA mag. If would like to continue to argue, please by all means message me back.

  • will any battery work in airsoft guns or only ones made for um

  • some crappy walmart guns will take like AA batteries and stuff, but the good ones need a battery with wires and a connector

  • i know that mini is one with wires but can u use other types as long as they have the connector or just ones made for the gun

  • there are hardly any gun specific batteries, so pretty much if it fits in the gun, the connector is the right kind, and it isnt to powerful, it will work

  • k thx

  • i am gittin one tomarrow

  • that is a good gun man

  • p90 4 ever ^^

  • 1. take 3 you are dryfireing it that alone will strip the gears

    2 can you put a lipo in an Echo1 P-90 without killing it?

  • man, i could just imagine some guy getting pellets reigning down upon him, "WTF?!?!?!"

  • i know how to kill it! SMASH IT

  • just wire 5 lipos together and it will probably die or explode

  • i would pwn in a airsoft war lol, i show em whos the boss

  • is that battery flamable like rc lipos?

  • Yep. Same deal. That's why we didn't want to push it any further once it started to warm up. We didn't want to flame the battery.

  • lmao i have the same gun, it was my first airsoft auto gun and wow mine does the same thing.... i put a 8.4v battery to it and shot it for about 5-6 mins and it wouldnt break...i don't understand how a plastic gear box can take that? i guess that tells you how much more a metel gear box can take (by the way LOL! at the "WHY WON'T YOU DIE!!!!") still even though its a firepower and it can take such force from a battery dosn't mean its awesome mine jamed all the time and broke in like a week.

  • The V6 is really one of the most solid gearbox designs. I wasn't expecting any problems with the mechbox per se. But I was expecting to strip the gears or something though... Oh well, next time it's being connected to a car battery. We'll see how that goes.

  • by the way, you said the gun was firing quicker with the 11.1 bat, not the case, just the rate of fire ingresses, not FPS.

  • Any reference to firing "quicker" was referring to rate of fire. I know battery has nothing to do with velocity.

  • why would u want to kill such a durable gun

  • Do you know where i can get a good P90

  • To answer your openly vague question with an equally vague answer - anywhere they sell airsoft guns.

  • lol thanks

  • Haha, this is awesome. I can't believe it wouldn't die.

  • You and me both...

  • Yeah, I guess this gun could be classed "Li-Po Ready"

  • Sadly, yeah, it could....

  • Yeah. Are you planning any more torture tests for the P90 to endure?

  • Next time around, we're connecting it to a car battery. I suspect the motor will probably burn out before the gun fails though.

    Although I'm seriously hoping otherwise. We want to see destruction. There's no way a plastic mechbox should be allowed to endure this type of punishment, when most don't even last a few hundred rounds running under normal conditions.

  • Yeah, that sounds good.

    And yeah, no idea how a plastic gearbox can withstand that. Oh well, the car battery will hopefully kill it

  • Oh my...

  • couldnt you just throw a tm mechbox in it? and have a nice p90?

  • The mechbox is apparently interchangeable, but the rest of the body and parts aren't. So the gun would be stuck with a regular barrel and non-adjustable hopup. And the shell is of poor quality as well, so not worh it.

  • Ahh crap...accidentally deleted the comment posted. Sorry dude...

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more