Nice find. I'd love to find one for $275, I'm a forklift tech, FE & F2 engines, Yale/Hyster, are high milers, seen many with 25k+ hours on them, thats roughly 750,000 miles on a car or truck. Most hadn't had more than just water pumps, timing belts, and maybe a head gasket or two. There's a reason they've used them for as many years as they have, and still use them today.
They never die do a weber 32/36 carb replacement and when you have some cash replace the exhaust system. Mine runs like crap in the winter (1990) the carb is JUNK after I replaced it just fine and you can remove a load of other parts. If you want some link let a man know. I am done with my engine mods and am just starting on the rusty body.
@BainLuke Hey man, send me some links. I have been dying to find a place to get a header and exhaust. I've seen a few diff carbs people use for this truck. I've heard of at least 3 different Webbers and one Holley. I'd like to know what's which carb to use and why.
hey its burning oil because, your carb is bad, your going to want to go buy a webber carb and put it in, i have an 88 mazda b2200 and it was burning oil as well until i put the new carb on.
@kickflip246810 you go by ear. or by a type R tach or any brand and install it a simple dash mount or side panel can look really nice and clean done right.
First of all, FlyingRaptorJesus FTW lol, and yeah, I have to same truck... but way more issues.. Mine burnt a shitload of oil, and still does. That seafoam probably made your issues worse, try out some of that stp oil treatment, if it does something a little than maybe get a can of cylinder repair. It will pug shit up around your rings.. assuming that they are shot. Check the engines compression, if there is none, then your valves are shot. Check the plugs, 1 and 4 on mine get crap on them.
i just rebuilt my motor in my mazda b2200 and it runs perfect, i am a mechanic so i have all the tools to do it but the one thing i can tell you is that if it burns real white puffy smoke then chances are you are burning antifreeze which mean you may just try taking the head off and getting it machined flat if there is any warp in to and slapping a new head gasket on it, just make sure that u follow sequence order when taking it off and putting it back on , try 2 get new head bolts for the head.
@nitrojoe9 ya, unless you have to rebuild the engine and put new rings in it, but i think its a timing issue because all the cylinders have spark or it might be that one of the intake valves is stuck closed or the rocker arm might have come off.
@MFRoosy16 smoking can often be fixed by putting new valve seals in the head. if you have some decent engine experience its not that hard. sometimes it is the piston rings which takes alot more to fix, but seals often help. if it smokes on start up 9 out of 10 times its the seals. cd player just get one and follow the wiring diagrams. a new one will drop in right in place of the old one
@nitrojoe9 HERES what i got. i got a pioneer Stereo i have the first old radio still in the mazda. trying to get to it is difficult.. having to take apart the dash... and such.. help?
doesen't sound like its running on all 4 at all times, try doing a tune up, maybe a little carb work, and check the timing, might help with the smoke too.
Nice find. I'd love to find one for $275, I'm a forklift tech, FE & F2 engines, Yale/Hyster, are high milers, seen many with 25k+ hours on them, thats roughly 750,000 miles on a car or truck. Most hadn't had more than just water pumps, timing belts, and maybe a head gasket or two. There's a reason they've used them for as many years as they have, and still use them today.
alscort93 2 weeks ago
They never die do a weber 32/36 carb replacement and when you have some cash replace the exhaust system. Mine runs like crap in the winter (1990) the carb is JUNK after I replaced it just fine and you can remove a load of other parts. If you want some link let a man know. I am done with my engine mods and am just starting on the rusty body.
BainLuke 1 month ago
@BainLuke Hey man, send me some links. I have been dying to find a place to get a header and exhaust. I've seen a few diff carbs people use for this truck. I've heard of at least 3 different Webbers and one Holley. I'd like to know what's which carb to use and why.
kingkong8974 1 month ago
ghetto....but if ghetto gets you places, then it's good ^_^
IH8Asparagus 1 month ago
Its so cute! Good buy!
S4NDYisNOTavailable 2 months ago
Sounds like a Massy! haha
MrTaurus00 4 months ago
This has been flagged as spam show
This generation of Mazda trucks are styled very nice.
LGLG69 4 months ago
Comment removed
LGLG69 4 months ago
i have an 87 b2200 got it for free put 800 into it runs great just a slight hesitation
thecriptd03 5 months ago
Comment removed
thecriptd03 5 months ago
The carburetor has nothing to do with it burning oil!
Smokeondavidp69 5 months ago
hey its burning oil because, your carb is bad, your going to want to go buy a webber carb and put it in, i have an 88 mazda b2200 and it was burning oil as well until i put the new carb on.
MrMaxistheshiz 6 months ago
Comment removed
calcatchem 6 months ago
does it still smoke after wat u did?
xxnissansilviaxx 7 months ago
i really want to put a hole in my B2200's exhaust now!, it sounds so crappy maybe it will make it sound more powerfull then it is.
Wayblazed420 7 months ago
i finally got my vid up of my b2200!!! Its the same color as yours i think,
dexterr88 8 months ago
Just got an 89 extended cab. In a little better condition body wise. Fun little truck to drive though. But it hardly burns any oil.
97ride 9 months ago
she's a gorgeous truck!
WillyPhister 10 months ago
lol 0:42 no keys push to start
kickflip246810 10 months ago
mine doont have an rpm gauge so how do you know when to let off the clutch?
kickflip246810 10 months ago
@kickflip246810 you go by ear. or by a type R tach or any brand and install it a simple dash mount or side panel can look really nice and clean done right.
-cheers
beeftothetaco123 10 months ago
@beeftothetaco123 thnks man its my first vehicle and and im only 16 so i was just wanting to know...nd i am just learning to drive stick shifts
bestbassbooster 10 months ago
Oh, got mine for free.. It needed a new clutch, some bolts for the manifold, a sparkplug hole repair kit.. Lots of oil, and love..
shadywalker 11 months ago
First of all, FlyingRaptorJesus FTW lol, and yeah, I have to same truck... but way more issues.. Mine burnt a shitload of oil, and still does. That seafoam probably made your issues worse, try out some of that stp oil treatment, if it does something a little than maybe get a can of cylinder repair. It will pug shit up around your rings.. assuming that they are shot. Check the engines compression, if there is none, then your valves are shot. Check the plugs, 1 and 4 on mine get crap on them.
shadywalker 11 months ago
hey, for 275 bucks not too bad
dukeentdotcom 11 months ago
lol i had the same truck. used about a qt of oil every other day. start it on a colder morning and it would almost suffocate you.
FlyinRaptorJesus 11 months ago
that things sick i might get an '87 just like that.
skillsaw94 1 year ago
275? good deal
XAVIXguy 1 year ago
i just rebuilt my motor in my mazda b2200 and it runs perfect, i am a mechanic so i have all the tools to do it but the one thing i can tell you is that if it burns real white puffy smoke then chances are you are burning antifreeze which mean you may just try taking the head off and getting it machined flat if there is any warp in to and slapping a new head gasket on it, just make sure that u follow sequence order when taking it off and putting it back on , try 2 get new head bolts for the head.
afterpain1995 1 year ago
i just bought a 1990 with 178,000 miles and the thing runs like a champ got it from an impound yard for 500 bucks ... im loving it so far!!
broham776 1 year ago
ive got the same truck and every same problems i brought mines for four hundred
mines a cab plus, so far i cleaned the engine real good so i can start working on it ive got a mini truck heaven
1981 ford courier (Restoreration in progress) (Cut And Shut rusted bed and engine rebuild)
1988 toyota pickup (Ive had it for 13yrs no major problems) Favorite truck
1991 ford ranger down grade by droppin a 4cyl
89 mazda b series (going make into a clean realiable daily driver, i dont know if
DexDizzy 1 year ago
i would so buy that truck off you for 500-1000
MFRoosy16 1 year ago
The pipe on mine is seprated in the same part.
RocklandRednecks 1 year ago
I would not even pay 50 bucks for the piece of shit, hope you know you just bought urself a money pit.....
tawler14 1 year ago
@tawler14 then you'd be an idiot he can scrap that for 200 or 400 if its to the pick n' pull ...
heyitsthatoneguy91 1 year ago
I really wouldn't care about the stuff being messed up since you only payed $275 for it. Good Buy
codmister350 1 year ago
sounds like ur running on 3 cylinders.
cool3be 1 year ago
all that stuff is pretty easy to fix
nitrojoe9 1 year ago
@nitrojoe9 ya, unless you have to rebuild the engine and put new rings in it, but i think its a timing issue because all the cylinders have spark or it might be that one of the intake valves is stuck closed or the rocker arm might have come off.
JHx86 1 year ago
@JHx86 well if you think you might have an ignition timing issue its 6 degrees before tdc.
nitrojoe9 1 year ago
@nitrojoe9 HOW DO YOU STOP IT FROM SMOKING? and install a CD player?
MFRoosy16 1 year ago
@MFRoosy16 smoking can often be fixed by putting new valve seals in the head. if you have some decent engine experience its not that hard. sometimes it is the piston rings which takes alot more to fix, but seals often help. if it smokes on start up 9 out of 10 times its the seals. cd player just get one and follow the wiring diagrams. a new one will drop in right in place of the old one
nitrojoe9 1 year ago
@nitrojoe9 HERES what i got. i got a pioneer Stereo i have the first old radio still in the mazda. trying to get to it is difficult.. having to take apart the dash... and such.. help?
MFRoosy16 1 year ago
@nitrojoe9 Yeah seals go bad in them easy anyways... and putting in a cd player isn't no big task. just rings would be rough without a shop =/
LoopKoop6778 1 year ago
my door panel is also ripped in the same spot, down in the corner.
warren10962 2 years ago
ahah that spot on the inner door panel looks identical to myn i have the same rip in that spot ahhaaah funny eh
mikefisher123 2 years ago
doesen't sound like its running on all 4 at all times, try doing a tune up, maybe a little carb work, and check the timing, might help with the smoke too.
metvelle 2 years ago 2