can i ask what transmitter you are using. i know how you fitted i but i want a 6 channel transmitter to be able to control everything. any help you can give would be appreciated
@KingDudi16 if you see strings, i want what youre smoking. haha but seriously there isnt strings, its 2 steering servos (1 on each side in the back of the car) he pretty much films it the whole time. you fuckin idiot
I got bored and put a couple of lego pneumatic rams in place of the shocks on my TL-01. It was pretty cool. Couldn't jump, but if I put the pressure really low it could still drive.
i'm going to do that. just waiting on the 6 channel i'm bidding on from ebay and me to get off my lazy ass and buy some tie rods. i'm going to make mine drivable and have the hydraulic effect on one radio.
Have you tried programing the servos so that when you turn left for example the left wheels lift slightly up? i wonder if that would improve the cars grip on the track.
this has nothing to do with this video, but have you had any problems with tl-01's speed controller? because mine catched fire once lol.. i should get esc..
um speed controller was crap and so was the motor so i upgraded it to a tz motor with a tak-po tpm8 esc and did this when i brought it so never used the original speed controller although its in the car there lol
yea it's like a toy if you don't buy new parts.. i should by esc and motor too, but i think i'll just sell the whole crap. actually my stock nikko is faster than the stock tl-01... :p
i dont have the skill to do that but the one thing i know is that the impreza belongs on the dirt track so get ur self a lowrider shell and let the impreza go home
i dont have the skill to do that but the one thing i know is that the impreza belongs on the dirt track so get ur self a lowrider shell and let the impreza go home
Let me guess... you have replaced the suspension with some servos, am I right? Nice job man, keep it up... However the WRX STI Subaru Impreza isn't the right body for this car, in my opinion... If I was in your shoes I'd drop her a Cadillac Escalade body and some big a** rims...
na it dsnt run caus there only standard servos nd cant lift the wieght ov a battery nd yea i was usn a 7 channel wit only 4 hookd up nd wait till u c wat i put up next u may not like it but its good although its probly been done
Front back and side to side lmfao...
ReddHarlemX1 3 months ago
but it isnt drivable with tis is it? i mean if u change the dampers with servos, those servos would take a lot of damage by humps
subtotal17 5 months ago
what did you connect the servo to the a arm or what ever, plz help.
stuvy72 5 months ago
so its essentially a servo connected to each wishbone and then a 4-channel radion system from a helicopter very clever :)
RichardoDiaz 6 months ago
can i ask what transmitter you are using. i know how you fitted i but i want a 6 channel transmitter to be able to control everything. any help you can give would be appreciated
humbugg 7 months ago
i love subaru wrx's i love hydralyics but a racing car and pimp hydralics dont mix but cool it would be cool with a chevy impala
dapimp9488 9 months ago
change the suspensions with servos? nice job
but are you racing or drifting? cause if your racing with no suspensions isn't it going to mess up the performance?
Andy87GDR 9 months ago
cool but pointless
supertacoman132 11 months ago
nit high enough. gotta make it go high and then it makes it look more realistic
hockeymann3232 1 year ago
Is not a Citroen :/
LeGlod 1 year ago
BOOOOOOORRRRRRIIIINNNNGGGGG!!!!!!!
Floridaredwing25 1 year ago
strings
xD
FAKE
KingDudi16 1 year ago
@KingDudi16 if you see strings, i want what youre smoking. haha but seriously there isnt strings, its 2 steering servos (1 on each side in the back of the car) he pretty much films it the whole time. you fuckin idiot
Bongwater123 6 months ago
servo zamontowane na karzdej pół ośce :) plus
Pawlo12100 1 year ago
u tied fishing line to it
daniel75740 1 year ago
do you guys realize he is probably moving it with a string
xxxstiddyxxx 1 year ago
Did you put the servo arm where the bottom of the shocks connected to the suspension arms?
VideoGamePlayer12 1 year ago
@VideoGamePlayer12 did you not watch the video lol :P
welshford 1 year ago
@welshford no i sort of lost interest and made an educated guess.
VideoGamePlayer12 1 year ago
put some flint on the bottom and DRAG THAT SHIT!!!!
EpikKustumz 1 year ago 3
let me gess you tock off the shocks and took multiple pictures and made a animation right?
RACmovie 1 year ago
steering servos lol
vlcjet 2 years ago
wack ass shit
MegaWicked1 2 years ago
cool!!!
What is the title of the song?
poliviu 2 years ago
ruby
nipperoid 2 years ago
r"espect
couillonfftd 2 years ago 2
ghehehe that is funny
mtfwtfgvd 2 years ago
how much did u put in this car
pending27 2 years ago
if somebody does racing and needs there car to be low they should do this so if there r bumps to raise the car up
dabombishere15 2 years ago
where do u get the stuff for that
gokarterkid25team 2 years ago
hahaha thats pretty sick, what more can u do
Darknights7 2 years ago
hey i have a tt-01 frame but where did u get the slick tires?
m2x3808 2 years ago
Well done mate!
wayne205stevens 2 years ago
nice idea, thats cool.....
waeliano 2 years ago
thats about as usefull as titts on a snake
spoolly12a 2 years ago 9
just as useful as hydraulics on a real car I guess...
forbannaidiot 2 years ago 10
hydraulics on a real car are not supposed to be useful,,,,,,,its just pure fun and a passion,,,,,,,
stop being a dick dude
sponserdsk8ter 2 years ago 2
I got bored and put a couple of lego pneumatic rams in place of the shocks on my TL-01. It was pretty cool. Couldn't jump, but if I put the pressure really low it could still drive.
phateracing 2 years ago
holy shit a sterring servo is doin that???
plyxrs 2 years ago
i'm going to do that. just waiting on the 6 channel i'm bidding on from ebay and me to get off my lazy ass and buy some tie rods. i'm going to make mine drivable and have the hydraulic effect on one radio.
sweendog1969 2 years ago
Pritty impressive but wtf is up with the music man
ALEKS98765432 3 years ago
you should use springs instead of tie rods so that you can still actually drive it at speed.
benatbenland 3 years ago
Any possibility of you installing the shocks as links instead of tierods?
Tboninator 3 years ago
great idea. very inspiring. im gone try that
Have you tried programing the servos so that when you turn left for example the left wheels lift slightly up? i wonder if that would improve the cars grip on the track.
oellinass 3 years ago 4
does the car run with that on?
rcisme1 3 years ago
make it as fast as soon as you can
snapywrist 3 years ago
waste of battery
metioriter 3 years ago
bad music. cool car
ViperOne999 3 years ago
omg...wtf is goin on with the music...
InkGraff 3 years ago
Whats the 2 batteries for on top of the main battery?
Limerick91 3 years ago
what is the scale model?
zamster8190 3 years ago
nice.....
sonnydrifter123 3 years ago
Smart n cool! :)
mmmaasss 3 years ago
how many channels does the control have?
hezmeister 3 years ago
Where did you get the rc car from. Like what web site? Can you plz tell me!
carking777 3 years ago
if you were t o replace those servos with high speed ones you could make it bounce could be expensive thoe
AEWRULES 3 years ago
hey where did you buy the hidralics
aztecprrd 3 years ago
i ddnt buy them u cnt buy a kit u hav to make it but it aint hard
scobbiedoo312 3 years ago
can you make a video on how to make them please
harmond2 3 years ago
think about it and watch the video closley and youll figure it out its not hard after you figure it out its just figuring it out thats the hard part
scobbiedoo312 3 years ago
@scobbiedoo312 quick question the installation looks simply but is the car drivable while making the car move up and down
lomeli1993 1 year ago
you need to replace the shocks with servo's
hezmeister 3 years ago
when u raise them up will it stay up or does it fall down? if it falls is it possible to keep it up like real hydros?
LoudAssGeo 3 years ago
@scobbiedoo312 actually you can buy hydro kits for rc cars ive seen them in a rc store
chopperkid19 11 months ago
damonm899 maybe its the two servos wire tied to the back "hint hint" lol
johnt52990 3 years ago
sikman how did you make it do that
damonm899 3 years ago
o good old manual speed control i love them always getting wet and jamming and stuff
seanpenrose 3 years ago
how much??? n e web sites to go to? info plz
1989FtB 3 years ago
How many channels was the radio you used? can you still drive it? Could you hit me with a message for a link to some clear pics?
motoSX125 3 years ago
cool video
watchmyxmods 3 years ago
can this work on my gas truck?
ovdirtbiker 3 years ago
this has nothing to do with this video, but have you had any problems with tl-01's speed controller? because mine catched fire once lol.. i should get esc..
refridgeratorimation 3 years ago
um speed controller was crap and so was the motor so i upgraded it to a tz motor with a tak-po tpm8 esc and did this when i brought it so never used the original speed controller although its in the car there lol
scobbiedoo312 3 years ago
yea it's like a toy if you don't buy new parts.. i should by esc and motor too, but i think i'll just sell the whole crap. actually my stock nikko is faster than the stock tl-01... :p
refridgeratorimation 3 years ago
A NIKKO IS FASTER????? Seriously?
ProductionDesignrMAX 3 years ago
try using high torque micro servos with that, it would save alot of weight and make it handle slightly better
siriussr 3 years ago
thats a smart idea... i bet it rides bad tho huh? its still hella unique and pretty damn cool.
low4life86 3 years ago 2
i was originally gettin a tt-01 but when it arrived it was faulty so i got sent a tl-01, what have you done? used servos, ingenuity i like it
donkeysarefun2k7 3 years ago
how do u do that please tell me
RCDUMMIESRC 3 years ago
more like airbags type cuz it doesnt really hop
divineprojects0 3 years ago
cool idea! Can you still drive it arround?
wwsracing 3 years ago 3
servos hahaha
marchalfeight 3 years ago
nice! (but kinda pointless really)
i dont have the skill to do that but the one thing i know is that the impreza belongs on the dirt track so get ur self a lowrider shell and let the impreza go home
daza1992 3 years ago
I think your comment is pretty pointless too.
refridgeratorimation 3 years ago
nice! (but kinda pointless really)
i dont have the skill to do that but the one thing i know is that the impreza belongs on the dirt track so get ur self a lowrider shell and let the impreza go home
daza1992 3 years ago
where did you get these chassis?_?
GangsterMafia77 3 years ago
Haha that's awesome!
phoenixfire47 3 years ago
i remember the old tl01!! there classics they are bad ass my first car!! check out my tc3 vids
marctc3 3 years ago
wtf? id rather drive my car than doing that, but it depends... still nice job!
LMXTHUGZ 3 years ago
Rather than wasting money on that i would get a stock motor and TRF damper set
simpsonslover123 3 years ago
Let me guess... you have replaced the suspension with some servos, am I right? Nice job man, keep it up... However the WRX STI Subaru Impreza isn't the right body for this car, in my opinion... If I was in your shoes I'd drop her a Cadillac Escalade body and some big a** rims...
scbcustoms 4 years ago 2
wau impresinante
radicalero150 4 years ago
nice work
lowriderrrr 4 years ago
that a bit of a waste of time lol
superbobble 4 years ago
u r using 4 servos,rite?
Intervention81 4 years ago
yea dats all it is
scobbiedoo312 4 years ago
Bah, I bet this shit doesn't even run, are you running that in a 7 ch airplane radio? What is really cool on doing that? Bro, got study?
rafammbass 4 years ago
na it dsnt run caus there only standard servos nd cant lift the wieght ov a battery nd yea i was usn a 7 channel wit only 4 hookd up nd wait till u c wat i put up next u may not like it but its good although its probly been done
scobbiedoo312 4 years ago
i just need an eazy wat soo i can put some on the back of my cuda for a drag car!
Mercealago 4 years ago
nice i want some for my tb evo
hpihooligan 4 years ago
just make them then its not that hard to do
scobbiedoo312 4 years ago
how do you make them???
Mercealago 4 years ago
look closly at the video u will firure it out
scobbiedoo312 4 years ago
yea, thanks fer nothing!
Mercealago 4 years ago
nice work :P
raksmofos 4 years ago