@arnoldimike I think you'll find you can plug into your "Main" in (Audio 6) from your booth out (mixer), just need to configure it in settings. This is the video that taught me how to as well, Cheers John!
Hello everyone. IT IS POSSIBLE TO RECORD USING NI AUDIO 6 and IT IS POSSIBLE TO USE THE RECORD OUT ON YOUR AMP in the same way you would use the record out on your mixer.
Hi John, I don't have a mixer with record out or booth out, so I tried using the record out of my amp and connected it to the main in of my audio 6 dj....
it didn't work, it just recorded the time code. Is it to do with the record out of the amp or the fact it's an audio 6?
One question. When I am recording, i try to record a mix, but the recorder also records when I am trying to cue up a song, is there a way i can disable it from recording the parts of the mix when I have to cue up a song?
One question. When I am recording, i try to record a mix, but the recorder also records when I am trying to cue up a song, is there a way i can disable it from recording the parts of the mix when I have to cue up a song?
i have traktor scratch duo 2 with an audio 6 my mixer is a denon dnx-100 i use two technics 1200 mk2 when i try to record it only records one channel while deck a is playing and when i switch to deck b and it does not record how can i configure my settings to record both decks whenever i play them? i have been trying to record some mixes and only one deck is recorded if you can help me out id greatly appreciate it thank you
great vid! i need some help! im using the new audio 10. where am i supposed to connect the rca,? in the front of the sound card i see it says Main in/out im not sure if it is there where i have to connect the rca cables?? help!! thank you
is it possible to record from traktor audio 6 onto an external recorder while using an external mixer?, i also want to keep the output of my mixes from using traktor going through my studio monitors
thanks a lot for the video john. but i am still having some difficulty. record is very important for i want it to be absolutily perfect! so heres my problem. my dj booth is already taken with speakers. i have 2 speakers goin out from the mater and 2 goin out for my booth.i got the djm800 and im not exactly sure where i should put the gold rca wires. so i tried putting them out of ther mixer in master 2 and into the D soundcard. the recording is fine but the volume is very low what should i do??
john i need some help...when i record theres a flashing red message at the bottom that says id3 tags cannot be read.....after i finish recording i load what i just recorded onto any of the decks and i press play...but no music comes out and there isnt any of the yellow wave forms showing?
Can I record at 320kbps rather than 1536kbps? I know how to do everything on the software just never found out if you can change the bit rate
Also when setting levels I advise everyone to take it down under the red and then a little more to leave room for effects as it sometimes increases the volume :)
Version 2 is out, and there is MUCH more confusion bc they changed the way they route a deck through...... A 4 deck tutorial for TSP2 using the xone 4D would be amazing
Great tutorial, mate. I can see that you have the key (8A) of your songs incorporated in your track names. Do you do that by hand or got some fancy program for that? I'm growing tired of typing it in one by one ... :-)
John, I have the djm-800 which has no RCA booth monitor inputs. All I have for the booth is 1/4. How do I it using the RCA record input on the back of my mixer?
John, I'd like to know if it's possible to record using an external mixer (Denon DN-X120) with the NI sound card Audio 2. I have no 'booth' input on the mixer and it is only two channels.
i got an iq2midi mixer and i was wondering if there s a way to record my mix using an USB cable from the mixer to a laptop and not using external sound card?
iv got it recording but for some reason when i use my cross fader (when i scratch) it does not let met cut the sounds if you know what i mean
for example i have a song on my a deck so the cross fader is to the right so kno i need to mix another song into that song so i put the cross fader tothe right now so it plays the b deckss song but it mutes both turntables i really do not get what this is is doing because it plays both tunrtables when the cross fader is to the right
Well I've got 2 cdj 350s + djm 400 with the audio 8 soundcard. When I record it gives me white noise, at first I couldn't figure why, but now I see you've got an RCA going in the front ins. Do I need more cords or do I need to move something around?
I can't record my mixes with my external mixer in traktor with out one of these right?
so would this work: I have 2 cdj 400's & a numark m3 mixer that i use as an external mixer when i play. if i get this would i be able to record my mixes?
plz help i heard that i need audio 8 but i dont have that much money yet but i do have enough for the audio 4. as long as i can record my mixes & play the same way i usually do this would be fine
ive followed your tutorial exactly. I have 2X1210's and a xone 92 with a record out. I cant get any sort of level through Traktor to record??? Can you help?
@theoriginaladdict its hard to help like this , just go over it again, check the settings. others also have had problems , read some of the comments they may help
hi, im using cdj 400 and djm 400 and i did exactly what you did and when i press the record button no sound comes, i end up with an empty track. why is this?
Thanks alot for this clear explanation, I forgot to set my channel C and channel D in the "input routing" part of the preferences, so if anybody here doesn't get any input then maybe you should look at that!
I have a problem with mixes. I did the same as you do on video but... the sound comes out as a terrible sound. I mean it wasn't a good quality at all. It was more bass than treble.
So all my equipments are :
DJM700
CDJ900*2
AUDIO 4 DJ
i don't know if i have to set the sound on traktor or on mixer. I hope you could help me out.
I have a problem with mixes. I did the same as you do on video but... the sound comes out as a terrible sound. I mean it wasn't a good quality at all. It was more bass than treble.
So all my equipments are :
DJM700
CDJ900*2
AUDIO 4 DJ
i don't know if i have to set the sound on traktor or on mixer. I hope you could help me out.
hey i have the numark mixdeck and traktor pro and i cant seem to get any recordings. my L and R dont move at all. there are 2 rca's at the back saying recording on them but how do i connect them to my computer?
Hi John I'm having complications with recording, O did everything you did in the video, however I have an allen and heath xone22 and I only have a monitor and record spot for my rcas, I put them in the record. When I play my music there is no sign of any sound going through the record section at the right. However, I can hear everything perfectly. When i record there is NO sound. What shall I do? thanks
@justin32222@justin32222 Hey Justin, did find a solution for that? I am having the same problem here. I use Behringer ddm 4000 mixer, Audio8dj and Traktor pro. Everything works perfectly, using mixer in external mode, monitors are connected with the mixer... Perfect sound. But recording- silence. All my settings are correct and checked 10 times.
Have searched for the signal:
1) TAPE out on mixer, 2) channel A out 3) channel B out .... No sound. If anyone knows, please...
Is it possible to do a basic mix in traktor pro using just the program? I have a DJM 800 and CDJ1000s but I want to do some quick mixes while travelling just on my laptop. Thanks in advance
with internal play, while recording i have a big ground noise nomatter wich channel i assign.....i have external xone 92, tried all....no power supp on my mac just batteries, grounded everithing, etc etc new cables and buzzing ground noise is there.....u think it can be becasue with internal play and external mix sound card gets retroaliemntd?
yes youre right i dont have it in "line in" i have it on a other place but i can change that in the software (realtek) so i have a audio input. i test it with line in but the problemis still here. i connect it like this (onlyhave one mixer and one tt)
audio 8 dj channel B "in" --> mixer line "out"
audio 8 dj channel B "out" --> into the speakers
and the tt rca cables into the line in off the mixer
i have my RCA cables going from the audio 8 DJ input D to the recording outputs on the djm 800, and there is no sound being picked up by traktor.
when i tried to just mix internally aswell, with the settings changed to internal recording, no sound is being picked up (the meters in traktor don't have any . do you have any idea why traktor does not detect anything?
i got everything you did except i have it on record stuff on my xone, when i press record from right top of traktor, nothing happen, there is no sound detected by traktor.
Great video. Got a thinker for ya. How about something like a Korg Zero 8? I dont have an Audio DJ 8 because the sound card is built into my mixer. Traktor bible dosent help, and im stumped. Thanks
Im gonna try to record in Traktor using cd's and I let you know what happened,also Im gonna try to record my mix using garageband and also I will let you know the results. I like a lot rekordbox is very efficient and useful,thanx for answer.
hey thanx for this video I was having trouble with recording but now Im on!!! quick question I've seen people Djing with Serato scratch pro and recording their mix with Traktor in the background,is there any chance to do the same playing with Rekordbox and recording with Traktor in the background,or playing with cd's and recording in Traktor,I'm asking you this because to be honest with you I don't like to use any interface to play,I just use reckordbox for the BPM and other awesome features.
hey thanx for this video I was having trouble with recording but now Im on!!! quick question I've seen people Djing with Serato scratch pro and recording their mix with Traktor in the background,is there any chance to do the same playing with Rekordbox and recording with Traktor in the background,or playing with cd's and recording in Traktor,I'm asking you this because to be honest with you I don't like to use any interface to play,I just use reckordbox for the BPM and other awesome features.
Grrr i Update from traktor duo to pro thinking in recording directly my mix.... Now i see that is not possible....=S Any solution diferent of buying audio dj 8?
John , cheers...been scratching my head over this and your the only video ive found that explains it the way i have my decks set up .once again thanks man!
I've got a question for recording using the audio 8. Right now I have a Rane TTM 56S mixer with an Auxilary Output. I have plugged a RCA cable into the 7/8 slot of the audio 8, and the other end into an Auxilary Output slot. My Rane Mixer manual said that it the Aux output serves as a booth out and record out. Now my question is, why won't Traktor pick up the sound from my timecodes?
Hey mate. I might be being a spanner, but can't get any levels appearing on the record levels. Done everything up to there. Any suggestions about what i might be doing wrong?
i've followed exactly what you showed here but it doesn't work??? I've plugged my rcas in both channel c and d as well as had them go into my mixer through master 1 and 2 and even another channel just to see if it work??? WTF?
has anybody have had issues recording with traktor pro??? im getting now for no reason a message that says that " audio - record could not be started! " and yesterday it was working flawless, i did not touch any config options at all. allready tried many things and it wont record. HELP.
just for reference... definately DON'T set your level as high as possible before clipping!!! you will definately clip if you do that (probably during your first mix) set it to record about half level.. and run it through a limiter... or master it in an audio editor later.. then you have headroom... and you should never clip during recording!
i cant make my recording work. no peak showing on the record session... plugs are good. i followed each and every instruction on d video. i got mine on 2d ext. mixer.. what should i do
Are your input LED's flashing on your Audio 8? I have a similar setup as you and my input LED's dont light, although I have good sound and no apparent issues.
If you're using M-Audio Fast Track Pro, then you only have channel A and Channel B. Both of these channels take 1/4 inch, so you need the RCA to 1/4 inch stereo to record in stereo through the input. Also, you can record external and internal at the same time. Not bad for a DJ on a budget.
hi john good vid mate, have you gone down the using a controller route? Was thinking about getting a xone 1d, until i found out my traktor scratch pro was a pirate, not at all happy mate!!
its happening alot lately pirate copys showing up . i used a vci for a bit and didnt like it . but i have heard good reveiws on the xone 1. but i dont know any club djs using controllers, so i stick with the scratch version , so it looks like im a dj . and not checking my emails. uknow wat i mean.
of course, i just find with scratch pro that there is alot of mouse work, so the controller could be used for loading decks, setting loops and controlling effects, check out richie hawtins setup on you tube.
You also have to remember that your booth out doesnt usually get the signal from the mic, the mic input only goes out through the master out....so it wont record you talking on the mic if its through booth out.
serato is a little tricky.... you have to get an RCA to stereo 1/4 inch adapter.
so it would go like this
MIXER record out> RCA >1/4in ADAPTER > MIC IN on serato box
once you have that wired,go in the serato software on the top left of your browser menu there is a little record button with a gain adjustment that records the mic input from your box. test it and make sure your levels are right and you should be golden. It records into your scratch lives recordings folder
As far as I know Serato doesn't allow you to record internally.
To record a Serato mix you would have to route an output channel on your mixer to a free input channel on your soundcard. If your using the SL1 box both your inputs would be taken by the turntables, so your only option would be to use a second soundcard or use the line in on your computer and record with something like Audacity.
A piece of advice for those trying to record. he hooked into the booth to adjust the levels (i use my booth output for "my booth")....... it much nicer in my opinion if you set input "c" from mic to line and use input "c" and you can see the record level input on the audio dj 8 itself and also adjust it from the audio dj 8 itself aswell
Cheers for the video, really helpful, but could you tell me how you create a dj mix with divided tracks? So a mix which is'nt just one long mix, cheers
Hi john, is this possible with an audio 6?
arnoldimike 2 weeks ago
@arnoldimike look im not sure maybe coz u need 2 inputs and the 3rd one u should be able to use as ur out to record in
A1partydjs 4 days ago
@arnoldimike I think you'll find you can plug into your "Main" in (Audio 6) from your booth out (mixer), just need to configure it in settings. This is the video that taught me how to as well, Cheers John!
DjKnoxy09 3 days ago
Hello everyone. IT IS POSSIBLE TO RECORD USING NI AUDIO 6 and IT IS POSSIBLE TO USE THE RECORD OUT ON YOUR AMP in the same way you would use the record out on your mixer.
22Donkey22 3 weeks ago
Hi John, I don't have a mixer with record out or booth out, so I tried using the record out of my amp and connected it to the main in of my audio 6 dj....
it didn't work, it just recorded the time code. Is it to do with the record out of the amp or the fact it's an audio 6?
22Donkey22 4 weeks ago
THIS TUTORIAL WAS AWESOME FOR THIS I WILL FUCKING SUBSCRIBE TO YOu!
ZhilvanArif 1 month ago
Can i record a dj mix with Behringer DDM400 and maya44 usb?
mwestwood100 1 month ago
Can you record with the new Audio 6?
Reptillo 1 month ago
This has been flagged as spam show
One question. When I am recording, i try to record a mix, but the recorder also records when I am trying to cue up a song, is there a way i can disable it from recording the parts of the mix when I have to cue up a song?
sergi044 1 month ago
One question. When I am recording, i try to record a mix, but the recorder also records when I am trying to cue up a song, is there a way i can disable it from recording the parts of the mix when I have to cue up a song?
sergi044 1 month ago
@sergi044 I think I also have the same problem. Its as if traktor is not recognising the actions of the crossfader
HoraceHam 1 month ago
Comment removed
gymfreak29 1 month ago
nice tutorial, but i've a problem: when i want to listen what i've recorded it says that i can't open the file:(??? can somebody tell me why?
(PS. sorry for my bad English)
nickwol12753 1 month ago
this helped me a lot thank you although I'm using the audio 10 so i went into the main input rather then deck d MERRY CHRISTMAS
slamminshan 2 months ago
And what if i dont have an audio 8? do you or does any body recommend recording internally?
Advice?
rudles 2 months ago
can you record without using audio 8?
rAmpAg324 2 months ago
thank you ! :)
StephenDoyle50 2 months ago
can anyone link to the song in the background it was EPC and needs my talent please k thanks.
poglee2157 2 months ago
How do you broad Cast use Traktor scratch pro...Thank you
Djjagwar 3 months ago
how do i make the settings for tractor audio 6 to record?
sooliog 3 months ago
Hey guys, i cant seem to get this working. I have traktor scratch pro and audio 10. and assistance would be great.
djcesare 3 months ago
where do you download the traktor scrath pro
blackopsmontage1000 4 months ago
to save disk space you could have your default recordings set to an external hard drive, then convert your wav file with your audio editing sofware.
MPrest1 4 months ago
John you forgot to mention that you need to route the input in your input settings in traktor
mastermc789 5 months ago
is it possible to record in mixdeck with traktor but with no box?
Esterztarz 6 months ago
sweeeeeeet so glad i found u !!!!
Esterztarz 6 months ago
I've watched this vid every time I've had to rewire my stuff, so helpful! Thanks
STrainJerk 7 months ago
you shut the hell up lady gaga is nice!
maveric511 7 months ago
i have traktor scratch duo 2 with an audio 6 my mixer is a denon dnx-100 i use two technics 1200 mk2 when i try to record it only records one channel while deck a is playing and when i switch to deck b and it does not record how can i configure my settings to record both decks whenever i play them? i have been trying to record some mixes and only one deck is recorded if you can help me out id greatly appreciate it thank you
rafsoto24 7 months ago
great vid! i need some help! im using the new audio 10. where am i supposed to connect the rca,? in the front of the sound card i see it says Main in/out im not sure if it is there where i have to connect the rca cables?? help!! thank you
alantiscareno 7 months ago
is it possible to record from traktor audio 6 onto an external recorder while using an external mixer?, i also want to keep the output of my mixes from using traktor going through my studio monitors
TheFunkologik 8 months ago
thanks a lot for the video john. but i am still having some difficulty. record is very important for i want it to be absolutily perfect! so heres my problem. my dj booth is already taken with speakers. i have 2 speakers goin out from the mater and 2 goin out for my booth.i got the djm800 and im not exactly sure where i should put the gold rca wires. so i tried putting them out of ther mixer in master 2 and into the D soundcard. the recording is fine but the volume is very low what should i do??
charloblenis 8 months ago
Thanks for the vid dude,
I know you posted it a while back but your tutorial was well done and simple to understand.
Cheers....
ciejedi 9 months ago
how do i save everything, what does my interface have to do with it
Also i have a stanton .202 mixer and it doesn't have a booth rca plug in or anything like that, do i need to upgrade?
djchinchilla523 9 months ago
how do i save everything, what does my interface have to do with it
djchinchilla523 9 months ago
Why dont yall just get an RCA to Auxiliary cable and connect it from the RECORD out of your mixer into the line in of you computer?
EspritDeMusique 9 months ago
john i need some help...when i record theres a flashing red message at the bottom that says id3 tags cannot be read.....after i finish recording i load what i just recorded onto any of the decks and i press play...but no music comes out and there isnt any of the yellow wave forms showing?
Jerkcrazy 9 months ago
2 things...
Can I record at 320kbps rather than 1536kbps? I know how to do everything on the software just never found out if you can change the bit rate
Also when setting levels I advise everyone to take it down under the red and then a little more to leave room for effects as it sometimes increases the volume :)
scoobydoobydoo1212 9 months ago
Version 2 is out, and there is MUCH more confusion bc they changed the way they route a deck through...... A 4 deck tutorial for TSP2 using the xone 4D would be amazing
FYICREW 9 months ago
thanks dude!
dnbholik 10 months ago
Great tutorial, mate. I can see that you have the key (8A) of your songs incorporated in your track names. Do you do that by hand or got some fancy program for that? I'm growing tired of typing it in one by one ... :-)
SanderLH 10 months ago
John, I have the djm-800 which has no RCA booth monitor inputs. All I have for the booth is 1/4. How do I it using the RCA record input on the back of my mixer?
IanDJcolorado 11 months ago
creepy man at 0:01
dvaifilmsdotcom 11 months ago
eres un chingon maestro!! i just learn a nu shit! thanks yo!
defton24 1 year ago
Very helpfull thanks!
ThePiprobins 1 year ago
John, I'd like to know if it's possible to record using an external mixer (Denon DN-X120) with the NI sound card Audio 2. I have no 'booth' input on the mixer and it is only two channels.
IanDJcolorado 1 year ago
@IanDJcolorado no not possible
A1partydjs 1 year ago
with trackor scratch pro you obviously have 4 dicks
DjRiches 1 year ago
Hi there!
i got an iq2midi mixer and i was wondering if there s a way to record my mix using an USB cable from the mixer to a laptop and not using external sound card?
if u know a way to do that, please help me out!
btw overall pretty good tutorial
thanks!
YvLuckspin 1 year ago
PLEASEEEEEEEE HELP
iv got it recording but for some reason when i use my cross fader (when i scratch) it does not let met cut the sounds if you know what i mean
for example i have a song on my a deck so the cross fader is to the right so kno i need to mix another song into that song so i put the cross fader tothe right now so it plays the b deckss song but it mutes both turntables i really do not get what this is is doing because it plays both tunrtables when the cross fader is to the right
djkatana100 1 year ago
hey mate! nice tutorial!
I have this: 2 technics1200 mk2 + reloop rmx 40 dsp + audio 4 dj
My question is if I can record with the audio 4 dj? cause I dont wanna buy the audio 8 just for record...
Thanks in advacne! ;)
cagonacona 1 year ago
Well I've got 2 cdj 350s + djm 400 with the audio 8 soundcard. When I record it gives me white noise, at first I couldn't figure why, but now I see you've got an RCA going in the front ins. Do I need more cords or do I need to move something around?
IBreatheGrime 1 year ago
okay i need someone to answer this question
I can't record my mixes with my external mixer in traktor with out one of these right?
so would this work: I have 2 cdj 400's & a numark m3 mixer that i use as an external mixer when i play. if i get this would i be able to record my mixes?
plz help i heard that i need audio 8 but i dont have that much money yet but i do have enough for the audio 4. as long as i can record my mixes & play the same way i usually do this would be fine
reply asap! thanks
TheDirtyWay 1 year ago
@TheDirtyWay get an audio 8. theres not enough channesl on an audio 4 .
A1partydjs 1 year ago
@A1partydjs If you were JUST using a mixer and the virtual decks on Traktor...would the Audio 4 work for this?
weeerandomaccount 1 year ago
Why do I keep getting "Auto-record cannot start" when I hit the record button?
LuKaBaGo 1 year ago
Comment removed
originalrecoil 1 year ago
I have a fix for everyone here who is having problems with traktors recording option..USE AUDACITY!!!!!!!!!.Tried tested and true it works the best
mikewhitford 1 year ago
Hi mate,
ive followed your tutorial exactly. I have 2X1210's and a xone 92 with a record out. I cant get any sort of level through Traktor to record??? Can you help?
regards.
theoriginaladdict 1 year ago
@theoriginaladdict its hard to help like this , just go over it again, check the settings. others also have had problems , read some of the comments they may help
A1partydjs 1 year ago
@A1partydjs Sorted now mate, i needed to change the Input Routing settings.
Heres what i did.
1. RCA on the sound card in INPUT C (5\6), and knob next to it switched to LINE
2. Traktor preferences: INPUT ROUTING section: Channel C- input 5 and 6
3. Traktor pref. : RECORDING: source external, Channel C
Thanks anyway.
theoriginaladdict 1 year ago
This has been flagged as spam show
@A1partydjs @A1partydjs Sorted now mate, i needed to change the Input Routing settings.
Heres what i did.
1. RCA on the sound card in INPUT C (5\6), and knob next to it switched to LINE
2. Traktor preferences: INPUT ROUTING section: Channel C- input 5 and 6
3. Traktor pref. : RECORDING: source external, Channel C
Thanks anyway.
theoriginaladdict 1 year ago
This has been flagged as spam show
@A1partydjs Sorted now mate, i needed to change the Input Routing settings.
Heres what i did.
1. RCA on the sound card in INPUT C (5\6), and knob next to it switched to LINE
2. Traktor preferences: INPUT ROUTING section: Channel C- input 5 and 6
3. Traktor pref. : RECORDING: source external, Channel C
Thanks anyway.
theoriginaladdict 1 year ago
This has been flagged as spam show
@A1partydjs @A1partydjs Sorted now mate, i needed to change the Input Routing settings.
Heres what i did.
1. RCA on the sound card in INPUT C (5\6), and knob next to it switched to LINE
2. Traktor preferences: INPUT ROUTING section: Channel C- input 5 and 6
3. Traktor pref. : RECORDING: source external, Channel C
Thanks anyway.
theoriginaladdict 1 year ago
hi, im using cdj 400 and djm 400 and i did exactly what you did and when i press the record button no sound comes, i end up with an empty track. why is this?
1meero 1 year ago
@1meero hard to help like this , just go over it again, check the settings. others also have had problems , read some of the comments they may help
A1partydjs 1 year ago
Very useful tutorial. Thanks John :)
BoomBucks 1 year ago
thanx for the info i was getting annnoyed
finallly i got the solution i got an RC cable n put it in deck D n my recordings are coming great
ur amazing dude
i owe u big time
doom1234567891 1 year ago
Thanks alot for this clear explanation, I forgot to set my channel C and channel D in the "input routing" part of the preferences, so if anybody here doesn't get any input then maybe you should look at that!
Matt90o 1 year ago
how do you split the tracks for audio cd?(in order to skip from one track to another)
paddyheadz 1 year ago
Thanks mate!!
Looks pretty easy cause u have to see that`s easy.
Thanks again!
LynLynchichi 1 year ago
Hi Mate ;
I have a problem with mixes. I did the same as you do on video but... the sound comes out as a terrible sound. I mean it wasn't a good quality at all. It was more bass than treble.
So all my equipments are :
DJM700
CDJ900*2
AUDIO 4 DJ
i don't know if i have to set the sound on traktor or on mixer. I hope you could help me out.
thanks a lot
cheers
Ozmetro2010 1 year ago
@Ozmetro2010 dont think it works with the audio 4. check the comments maybe u might find some tips .
A1partydjs 1 year ago
Comment removed
djuujb 1 year ago
Comment removed
djuujb 1 year ago
Comment removed
djuujb 1 year ago
@Ozmetro2010; you might want to make sure your sound-card isn't recording on phono... use cd/line
richi3mass3 1 year ago
Hi Mate ;
I have a problem with mixes. I did the same as you do on video but... the sound comes out as a terrible sound. I mean it wasn't a good quality at all. It was more bass than treble.
So all my equipments are :
DJM700
CDJ900*2
AUDIO 4 DJ
i don't know if i have to set the sound on traktor or on mixer. I hope you could help me out.
thanks a lot
cheers
Ozmetro2010 1 year ago
hey i have the numark mixdeck and traktor pro and i cant seem to get any recordings. my L and R dont move at all. there are 2 rca's at the back saying recording on them but how do i connect them to my computer?
spundfx 1 year ago
Hi John I'm having complications with recording, O did everything you did in the video, however I have an allen and heath xone22 and I only have a monitor and record spot for my rcas, I put them in the record. When I play my music there is no sign of any sound going through the record section at the right. However, I can hear everything perfectly. When i record there is NO sound. What shall I do? thanks
Justin
justin32222 1 year ago
@justin32222 did u try using the monitor out ?? also check some of the comments , u may find the answear there.
A1partydjs 1 year ago
Comment removed
djuujb 1 year ago
This has been flagged as spam show
@justin32222 @justin32222 Hey Justin, did find a solution for that? I am having the same problem here. I use Behringer ddm 4000 mixer, Audio8dj and Traktor pro. Everything works perfectly, using mixer in external mode, monitors are connected with the mixer... Perfect sound. But recording- silence. All my settings are correct and checked 10 times.
Have searched for the signal:
1) TAPE out on mixer, 2) channel A out 3) channel B out .... No sound. If anyone knows, please...
Thanks,
Dju
djuujb 1 year ago
make sure u got the recording on external and deck d
aanrander 1 year ago
Is it possible to do a basic mix in traktor pro using just the program? I have a DJM 800 and CDJ1000s but I want to do some quick mixes while travelling just on my laptop. Thanks in advance
UpioFox 1 year ago
thanks alot mate
misterrrbutler 1 year ago
Comment removed
emireitor 1 year ago
with internal play, while recording i have a big ground noise nomatter wich channel i assign.....i have external xone 92, tried all....no power supp on my mac just batteries, grounded everithing, etc etc new cables and buzzing ground noise is there.....u think it can be becasue with internal play and external mix sound card gets retroaliemntd?
falopz 1 year ago
ok i do what you say but when i recording than it records only the "peeeeeep" whats my problem? can u help?
peace
LivinNostalgia 1 year ago
@LivinNostalgia i have the same fuckin problem. if u found an answer, plz help!!!
dherrer1 1 year ago
@LivinNostalgia r u sure u have it on line , not cd or phono ??, check ur connections r in the correct placeas well.
A1partydjs 1 year ago
first of all thanks that you wanna help me :)
yes youre right i dont have it in "line in" i have it on a other place but i can change that in the software (realtek) so i have a audio input. i test it with line in but the problemis still here. i connect it like this (onlyhave one mixer and one tt)
audio 8 dj channel B "in" --> mixer line "out"
audio 8 dj channel B "out" --> into the speakers
and the tt rca cables into the line in off the mixer
audio 8 dj usb connected
smth wrong?
LivinNostalgia 1 year ago
i have a djm 800 and NI audio 8 DJ
i have my RCA cables going from the audio 8 DJ input D to the recording outputs on the djm 800, and there is no sound being picked up by traktor.
when i tried to just mix internally aswell, with the settings changed to internal recording, no sound is being picked up (the meters in traktor don't have any . do you have any idea why traktor does not detect anything?
segmata666 1 year ago
@A1partydjs - I figured it out....Just got my Audio 8 in the mail today ;) (needd it anyways for portability). Thanks again
ULDNBTBM 1 year ago
Hey man im using traktor scratch pro with audio 8 connected to 2 statons str8.150 and a Xone 22.
Since i dont have booth monitor on my xone, should i put the in 7/8 from the audio 8 to the record one ? thx for info & for the vid !!
Rewayyy 1 year ago
@Rewayyy yep that should work, u just cant adjust the levels using mixer, u can still do it via traktor
A1partydjs 1 year ago
@A1partydjs seems that its not working :s
i got everything you did except i have it on record stuff on my xone, when i press record from right top of traktor, nothing happen, there is no sound detected by traktor.
any ideas?
Rewayyy 1 year ago
@Rewayyy hmmmm, look sound silly but the level on trktor record is up ?? other than that , dont know , coz i dont have the same mixer as u .. sorry
A1partydjs 1 year ago
This has been flagged as spam show
@A1partydjs seems that its not working i did everything you did step by step except i got it on record instead of booth monitor
when i click on record from topright corner of traktor, nothing happen. there is no sound??
any idea?
Rewayyy 1 year ago
Great video. Got a thinker for ya. How about something like a Korg Zero 8? I dont have an Audio DJ 8 because the sound card is built into my mixer. Traktor bible dosent help, and im stumped. Thanks
ULDNBTBM 1 year ago
@ULDNBTBM sorry m8 dont know anything about korg zero 8. i dont have one
A1partydjs 1 year ago
Im gonna try to record in Traktor using cd's and I let you know what happened,also Im gonna try to record my mix using garageband and also I will let you know the results. I like a lot rekordbox is very efficient and useful,thanx for answer.
alexalien999 1 year ago
This has been flagged as spam show
hey thanx for this video I was having trouble with recording but now Im on!!! quick question I've seen people Djing with Serato scratch pro and recording their mix with Traktor in the background,is there any chance to do the same playing with Rekordbox and recording with Traktor in the background,or playing with cd's and recording in Traktor,I'm asking you this because to be honest with you I don't like to use any interface to play,I just use reckordbox for the BPM and other awesome features.
alexalien999 1 year ago
hey thanx for this video I was having trouble with recording but now Im on!!! quick question I've seen people Djing with Serato scratch pro and recording their mix with Traktor in the background,is there any chance to do the same playing with Rekordbox and recording with Traktor in the background,or playing with cd's and recording in Traktor,I'm asking you this because to be honest with you I don't like to use any interface to play,I just use reckordbox for the BPM and other awesome features.
alexalien999 1 year ago
@alexalien999 dont really know sorry m8, i dont have serato or rekordbox . u can records in traktor using cds tho.
A1partydjs 1 year ago
Grrr i Update from traktor duo to pro thinking in recording directly my mix.... Now i see that is not possible....=S Any solution diferent of buying audio dj 8?
tsparkt 1 year ago
@tsparkt not that i know of
A1partydjs 1 year ago
How can i record my mix with 4x4 USB Audio Interface soundcard from M-Audio Torq Connectiv on Traktor?
aljo558 1 year ago
What should i do if there is no option for recording in the preferences?
gymmjm93 1 year ago
@gymmjm93 if u have traktor scratch pro it should be there. u must have duo version . do think u can record with that using traktor.
A1partydjs 1 year ago
@gymmjm93 i have no recording option in duo neither
basbertens80 1 year ago
Comment removed
basbertens80 1 year ago
What's the track at the beginning?
DjiXas 1 year ago
what about if your using the audio 4 ? i cant get my head around it, its driving me nuts
MrGwizzle87 1 year ago
whats the background music around 1:00-2:00 ?
Breakzoras 1 year ago
John , cheers...been scratching my head over this and your the only video ive found that explains it the way i have my decks set up .once again thanks man!
MYEVILTWIIN 1 year ago
can u record in serato ????
gk111127 1 year ago
I've got a question for recording using the audio 8. Right now I have a Rane TTM 56S mixer with an Auxilary Output. I have plugged a RCA cable into the 7/8 slot of the audio 8, and the other end into an Auxilary Output slot. My Rane Mixer manual said that it the Aux output serves as a booth out and record out. Now my question is, why won't Traktor pick up the sound from my timecodes?
djbesouro 1 year ago
hey quick question -- if i was to set my mixer to record from the booth output how do i set up the preferences for that??
i use a DXM09
majestige 1 year ago
@majestige u dont need to do anything in preferences for that
A1partydjs 1 year ago
is the audio dj not directly connected with the pc?
desenfantsterribles 1 year ago
great video john, thank alot, covered all the questions I needed answered!
statto1981 1 year ago
Hey mate. I might be being a spanner, but can't get any levels appearing on the record levels. Done everything up to there. Any suggestions about what i might be doing wrong?
Cheers
SydneyBrit 1 year ago
thanks man!!
djgmacris 1 year ago
i've followed exactly what you showed here but it doesn't work??? I've plugged my rcas in both channel c and d as well as had them go into my mixer through master 1 and 2 and even another channel just to see if it work??? WTF?
DJCBROWN 1 year ago
This has been flagged as spam show
has anybody have had issues recording with traktor pro??? im getting now for no reason a message that says that " audio - record could not be started! " and yesterday it was working flawless, i did not touch any config options at all. allready tried many things and it wont record. HELP.
nicolas7910 2 years ago
Guys please if anyone can help me out .. my setup is done but i dont have the booth thing on the back i'm using DJM 400, any ideas ?
q8m09 2 years ago
is there any setting apart from the one in the video i mabye need to do?, am all new to computers
COLDCRYSTALPROJECT1 2 years ago
followed this vid perfectly trying to record and it doesent work any ideas? lol
COLDCRYSTALPROJECT1 2 years ago
awesome! thanks for summing this up. I found it more useful the the NI forums
djmichaelcolucci 2 years ago
just for reference... definately DON'T set your level as high as possible before clipping!!! you will definately clip if you do that (probably during your first mix) set it to record about half level.. and run it through a limiter... or master it in an audio editor later.. then you have headroom... and you should never clip during recording!
; )
djcolinturnbull 2 years ago
good tutorial i was trying to figure it out on my own for at least a year and the year before learning the program i think im ready
SuckaPhree85 2 years ago
How can i record using Traktor Pro and an external mixer my dj set with Audio 4 DJ?
cristex 2 years ago
@cristex you cant record external with audio 4, only internal
q8m09 2 years ago
@cristex should be the same process, only the channel will be called something else because it's a different model. So prob wont be called CH D
JackDooner 1 year ago
@cristex Trying to do the same thing... cant seem to find an answer.. damn it..i knew i should of got the audio 8 instead.
djdutch 1 year ago
nice one!
aiman1385 2 years ago
hey Jhon i dont know if u could help me... i want to record through the REALPLAYER GOLD 11 so if u could help reply me plz thx...
seanpaul1407 2 years ago
where would i put the cable to record in a djm 300 as it does not have the booth input?
thankyou
1985cam 2 years ago
i had a djm 300 got rid of it for that exact reason , i cant remember but i dont think it even had a REC. out just check for that .
A1partydjs 2 years ago
k thanks
1985cam 2 years ago
i'm using traktor scratch pro + Audio 4 dj & 2Xcdj 400 + DJM 400 any advice ?
q8m09 2 years ago
Top man, Thanks for the video mate.
peachproductionsful 2 years ago
Comment removed
djtypeo99 2 years ago
i cant make my recording work. no peak showing on the record session... plugs are good. i followed each and every instruction on d video. i got mine on 2d ext. mixer.. what should i do
djtypeo99 2 years ago
Comment removed
waljo89 2 years ago
This has been flagged as spam show
@djtypeo99 You need to set the input for deck 4 as input 7 and 8 in the input settings, I had the same problem but figured it out
waljo89 2 years ago
@waljo89 thank you for this answer! i was having the same issue...
AudreyNapoleon 1 year ago
Comment removed
djtypeo99 2 years ago
Great Video, I was looking on new way to set up my traktor for recording
Semper fi
DJ Vashon
vashonn 2 years ago
This has been flagged as spam show
Are your input LED's flashing on your Audio 8? I have a similar setup as you and my input LED's dont light, although I have good sound and no apparent issues.
xsquid99 2 years ago
Comment removed
xsquid99 2 years ago
No traktor 3 records but you can't use timecoded CDs with it - thanks for the vid mate but my trouble was with ID tags that seems to be sorted now
dubsbhoy 2 years ago
Thank you!!
SAINT808 2 years ago
If you're using M-Audio Fast Track Pro, then you only have channel A and Channel B. Both of these channels take 1/4 inch, so you need the RCA to 1/4 inch stereo to record in stereo through the input. Also, you can record external and internal at the same time. Not bad for a DJ on a budget.
djnamelessmix 2 years ago
hi john good vid mate, have you gone down the using a controller route? Was thinking about getting a xone 1d, until i found out my traktor scratch pro was a pirate, not at all happy mate!!
MaNiPuL8able 2 years ago
its happening alot lately pirate copys showing up . i used a vci for a bit and didnt like it . but i have heard good reveiws on the xone 1. but i dont know any club djs using controllers, so i stick with the scratch version , so it looks like im a dj . and not checking my emails. uknow wat i mean.
A1partydjs 2 years ago
of course, i just find with scratch pro that there is alot of mouse work, so the controller could be used for loading decks, setting loops and controlling effects, check out richie hawtins setup on you tube.
MaNiPuL8able 2 years ago
did he say you have 4 dicks? around 45 seconds
YoItsDeka 2 years ago
decks.
philler101 2 years ago
just like my music teacher said, Red is the color of blood, and bleeding is not good!! good vid
juzzfrofun 2 years ago
You also have to remember that your booth out doesnt usually get the signal from the mic, the mic input only goes out through the master out....so it wont record you talking on the mic if its through booth out.
cheers
DudasMiska 2 years ago
do you have to get traktor scratch pro to record mixes?
hypahyper 2 years ago
But the booth monitor is mono if aim not mistaken!? Some one els???
clubdore 2 years ago
The Booth is a twin RCA Output (Red and White) meaning it is in Stereo.
If you decided to connect one moniter speaker up, then you would get mono sound.
Maxsdiscos 2 years ago
serato is a little tricky.... you have to get an RCA to stereo 1/4 inch adapter.
so it would go like this
MIXER record out> RCA >1/4in ADAPTER > MIC IN on serato box
once you have that wired,go in the serato software on the top left of your browser menu there is a little record button with a gain adjustment that records the mic input from your box. test it and make sure your levels are right and you should be golden. It records into your scratch lives recordings folder
AngeloLomelo 2 years ago
Standard CDs can hold up to 80 minutes of audio (700 MB of data), which means that 2038MB of WAV equals just under 4 hours.
tekkaz 2 years ago
As far as I know Serato doesn't allow you to record internally.
To record a Serato mix you would have to route an output channel on your mixer to a free input channel on your soundcard. If your using the SL1 box both your inputs would be taken by the turntables, so your only option would be to use a second soundcard or use the line in on your computer and record with something like Audacity.
tekkaz 2 years ago
Comment removed
tekkaz 2 years ago
A piece of advice for those trying to record. he hooked into the booth to adjust the levels (i use my booth output for "my booth")....... it much nicer in my opinion if you set input "c" from mic to line and use input "c" and you can see the record level input on the audio dj 8 itself and also adjust it from the audio dj 8 itself aswell
cheers
AngeloLomelo 2 years ago
Cheers for the video, really helpful, but could you tell me how you create a dj mix with divided tracks? So a mix which is'nt just one long mix, cheers
punter667 2 years ago
WOW, that was the most informative video i've seen yet on tracktor
bass1n5ur9face13 2 years ago 2