PLEASE RESPOND TO THIS!!! PLEASE I NEED YOUR HELP!!! I have that same engine on mine.... the only problem is My Kill switch Broke on it. I've been looking at alot of videos and I can't find it... What kind of switch did you use(SPST? SPDT? DPST?)? How many Prongs was it? And did you wire it to the Negative side (-) of the switch or the positive side (+) ??? Please I need your help... I have to Run the fuel out of my engine to cut it off! Please help me!!!
@Mijaycapri79 whoa easy there capri, it's not too hard we'll get through this.
you can use any, but all you need is a SPST. connect the middle lead to ground and the other lead to the ignition. when you open the two, the engine will run. when you close the two, the engine will not run.
@thegenrl On mine, It doesn't have that red switch on the engine... It just have a One wire switch with a connecter by the carb and my switch is the switch that takes the one wire and screws it into the switch. I took the switch plate off and all it has is a bearing ball which turns the switch on and off... its a weird one way switch. It doesnt have two wires only one. Any help?
@Mijaycapri79 hi again. the switch is probably self-grounded, meaning one leg is already connected to ground (go cart frame). the other leg is connected to the primary of the coil, which is probably the only wire coming out of the engine. this way when you close the contacts of the switch (switch the motor off) the primary of the coil grounds and stops the spark from happening.
@Mijaycapri79 if your kill switch broke just tie the two wires together and that will hot wire it to run and when you go to shut it off just either un tie the wires or unplug the spark plug wire that will shut it down
I just bought a dingo and I live in Canada. But I can't seen to find any replacement brake pucks anywhere. Do you know of any places that'll sell and ship to Canada?
quite a few yrs ago in the late 80`s i converted a dingo by arranging the back end so it was a bit longer and fitted a Kawasaki kx500cc moto cross engine in .
After a lot of work on the exhaust ,converting the hand changing gear lever with clutch problems so it worked properly ,sorting out the brakes ,fuel tank etc no rad it was air cooled
this when started and running was terrifying the acceleration was suicidal crazy point press accelerator peddle shit it and pray
sounds like the rod is being put through hell my friend had one like that and it sounded like that and a few weeks later it threw a rod and completely destroyed the motor
ah thats alright, this thing will still run forever. just after this video i took it to maine and put well over 50 miles on it (yes actually documented on my GPS over 50 miles!)
Hey were did you get this go kart cuz i have been wanting to repair a go kart but i havent found one yet and this go cart is awsome so i wanted to know where do u get ur go karts
well i have the same one and mine came with a crapy tacumsa well than i switched to blue max wich came with a 6.5 hp and it his 50 easily i had to make so much updates on it but if i were u i would switch to a blue max alot better engine
this one and another are the only ones i have left right now. but ill get more, i only buy when they are super cheap.
i got them so when my friends came over, we all had something we could race around the yard with. good times man! ive had about 20-25 different ones so far...not at once though (i wish!). that list keeps growing too.
no offense dude, actually its a good thing, but how many flipping noodle go karts do you have? this manco, the other manco, your pathwinder......how many? how much is a dingo anyways? i have 1 kart now, thinking abouot buying a dingo after i buy a 4 wheeler.
I love the invisible roll cage
chaise81 3 months ago
what size sprockets r u running on the engine and axle
bmxking411 10 months ago
same cart here man the tires that come with it suck balls the front ones the back last for a while
malcominthemiddle0 1 year ago
are you selling that and how much and i am a girl
ntoicole 1 year ago
mine was fully red.. but im only after painting it half black... mine needs 2 more tires :L <3 winter
HardStyleAddictionzz 1 year ago
PLEASE RESPOND TO THIS!!! PLEASE I NEED YOUR HELP!!! I have that same engine on mine.... the only problem is My Kill switch Broke on it. I've been looking at alot of videos and I can't find it... What kind of switch did you use(SPST? SPDT? DPST?)? How many Prongs was it? And did you wire it to the Negative side (-) of the switch or the positive side (+) ??? Please I need your help... I have to Run the fuel out of my engine to cut it off! Please help me!!!
Mijaycapri79 1 year ago
@Mijaycapri79 whoa easy there capri, it's not too hard we'll get through this.
you can use any, but all you need is a SPST. connect the middle lead to ground and the other lead to the ignition. when you open the two, the engine will run. when you close the two, the engine will not run.
thegenrl 1 year ago
@thegenrl On mine, It doesn't have that red switch on the engine... It just have a One wire switch with a connecter by the carb and my switch is the switch that takes the one wire and screws it into the switch. I took the switch plate off and all it has is a bearing ball which turns the switch on and off... its a weird one way switch. It doesnt have two wires only one. Any help?
Mijaycapri79 1 year ago
@Mijaycapri79 hi again. the switch is probably self-grounded, meaning one leg is already connected to ground (go cart frame). the other leg is connected to the primary of the coil, which is probably the only wire coming out of the engine. this way when you close the contacts of the switch (switch the motor off) the primary of the coil grounds and stops the spark from happening.
thegenrl 1 year ago
@thegenrl And by the way... I have the pathwinder if that helps.
Mijaycapri79 1 year ago
@Mijaycapri79 if your kill switch broke just tie the two wires together and that will hot wire it to run and when you go to shut it off just either un tie the wires or unplug the spark plug wire that will shut it down
sherwoodtyler77 7 months ago
wow haha tht is exactly wat mine looks like but diff engine and color
Krooked339 1 year ago
I just bought a dingo and I live in Canada. But I can't seen to find any replacement brake pucks anywhere. Do you know of any places that'll sell and ship to Canada?
lordcrobar 1 year ago
you got any spare parts?
muddymanify 1 year ago
whats the diameter of the front spindle? 5/8"? 1/2'? thanks for the help
muddymanify 1 year ago
dude if u r selling this how much and where r u located
mig123100 1 year ago
a go kart engine with a primer bulb. Thats not something you see everyday
pivotboy63 1 year ago
What was that line you were dinglin around with near the end? fuel?
KrAxRACING 1 year ago
hi and yes this is a fuel shutoff.
thegenrl 1 year ago
quite a few yrs ago in the late 80`s i converted a dingo by arranging the back end so it was a bit longer and fitted a Kawasaki kx500cc moto cross engine in .
After a lot of work on the exhaust ,converting the hand changing gear lever with clutch problems so it worked properly ,sorting out the brakes ,fuel tank etc no rad it was air cooled
this when started and running was terrifying the acceleration was suicidal crazy point press accelerator peddle shit it and pray
wish i still had it ..scarry
chromealien 1 year ago
pretty sweet
jsesTM 2 years ago
sounds like the rod is being put through hell my friend had one like that and it sounded like that and a few weeks later it threw a rod and completely destroyed the motor
jsesTM 2 years ago
ah thats alright, this thing will still run forever. just after this video i took it to maine and put well over 50 miles on it (yes actually documented on my GPS over 50 miles!)
thegenrl 2 years ago
300 for it
LAREDOSK8 2 years ago
Hey were did you get this go kart cuz i have been wanting to repair a go kart but i havent found one yet and this go cart is awsome so i wanted to know where do u get ur go karts
hitman4156 2 years ago
well i have the same one and mine came with a crapy tacumsa well than i switched to blue max wich came with a 6.5 hp and it his 50 easily i had to make so much updates on it but if i were u i would switch to a blue max alot better engine
austinbarth101 2 years ago
how fast is it?
Whatsyurname00 2 years ago
hi this can do 30-35 mph on levelish pavement. keep in mind anything faster than that would be TERRIBLE on this suspensionless gocart.
thegenrl 1 year ago
@thegenrl mine goe 47 and my brothers 53 no suspension 2 seaters...its horrible riding...horible
ghostshot1004 1 year ago
@thegenrl not really lol ive done 55 on a old dirt road and nothen ever happend
dragata1 1 year ago
@dragata1 do you know how fast 55mph is? please post a video of you with a GPS documenting your 55mph suspension-less gocart on a dirt road.
thegenrl 1 year ago
have exact same one see my video
Mr5106 2 years ago
i have a very old dingo go kart that has a bad clutch on it but man is it awesome
lilfitz15 2 years ago
hey what does a torque converter do to the kart??
footballguy7979 2 years ago
y dont u drive it
tratdall 2 years ago
usually get them in people's backyards all broken and not working
thegenrl 2 years ago
were do u get all those go cart from??
dvowill523 2 years ago
They have this littel motor on sale and the current bid $81.00, do you think i should buy it?
kpj200 2 years ago
sure man, its a great motor. i only dont like the carb (which you can easily change if you want). youll probably pay alot for shipping though.
thegenrl 2 years ago
this one and another are the only ones i have left right now. but ill get more, i only buy when they are super cheap.
i got them so when my friends came over, we all had something we could race around the yard with. good times man! ive had about 20-25 different ones so far...not at once though (i wish!). that list keeps growing too.
thegenrl 2 years ago
no offense dude, actually its a good thing, but how many flipping noodle go karts do you have? this manco, the other manco, your pathwinder......how many? how much is a dingo anyways? i have 1 kart now, thinking abouot buying a dingo after i buy a 4 wheeler.
MXHondas230 2 years ago