@codyh911. You probably have some clogged jets, what y need to do is get a new set of jets take apart your carbs compleaty and thoroughly clean every nook and cranny put everything back together and if u have the same probablom you know for sure it's not ur carbs, after that I'll check ur spark plugs
I have a question I have an 88 banshee and i have those stupid tores box things and it is only running on one cylinder and i cant figure it out for the life of me it isent getting gas to the left carb but it will run all day on the right cylinder it has good compression on both sides and it just isent sucking gas on the left side i was wondering if u had any ideas thanks
u turn the screw in or out depending on how the bike runs. i adjust it to where when give it gas it picks up quickly and very lil lag. if u turn the screw 3 turns out or more u need a smaller pilot. it bike runs better with air screw closed u need a bigger pilot. the oil on one pipe and other dry should clear up once both carbs are synced
they are the stock mukuni carbs so stock wtf. and guy with boost bottle you can still sync with a boost bottle. bottle just equalizes the pulses between both carbs. honestly i would get rid of the boost bottle before you have an air leak. put a one piece billet intake on and that will solve that.
Hey man~! i just bought a banshee a few weeks ago and need to sync and set the idle on my carbs but i called the dealer for a vacuum gauge like yours but he said i can't adjust mine with that because i got the boost bottle, now im wondering if he's bull shitting me or if its true...
you should do a video of how to find the right idle if one or both is off... that would be helpful to some ppl, im still having hard time to find how to adjust both equal...
What due you call the meter your using in the video ??? and where can joe smoe buy it ?
185tharmydental 3 weeks ago
@codyh911. You probably have some clogged jets, what y need to do is get a new set of jets take apart your carbs compleaty and thoroughly clean every nook and cranny put everything back together and if u have the same probablom you know for sure it's not ur carbs, after that I'll check ur spark plugs
HardcourJustin 1 month ago
I have a question I have an 88 banshee and i have those stupid tores box things and it is only running on one cylinder and i cant figure it out for the life of me it isent getting gas to the left carb but it will run all day on the right cylinder it has good compression on both sides and it just isent sucking gas on the left side i was wondering if u had any ideas thanks
codyh911 11 months ago
u turn the screw in or out depending on how the bike runs. i adjust it to where when give it gas it picks up quickly and very lil lag. if u turn the screw 3 turns out or more u need a smaller pilot. it bike runs better with air screw closed u need a bigger pilot. the oil on one pipe and other dry should clear up once both carbs are synced
wesw78 11 months ago
are you adjusting the air screw in or out? on the left exhaust the pipe looks oily inside and the right looks dry. how can i fix that?
kingsizereeses94 11 months ago
I GOT A BANSHEE WONT START NEED HELP!!!!!!!!!!!
WAYNE8458 1 year ago
they are the stock mukuni carbs so stock wtf. and guy with boost bottle you can still sync with a boost bottle. bottle just equalizes the pulses between both carbs. honestly i would get rid of the boost bottle before you have an air leak. put a one piece billet intake on and that will solve that.
wesw78 1 year ago
How are they stock! TORS?
michaelcbr1 1 year ago
Hey man~! i just bought a banshee a few weeks ago and need to sync and set the idle on my carbs but i called the dealer for a vacuum gauge like yours but he said i can't adjust mine with that because i got the boost bottle, now im wondering if he's bull shitting me or if its true...
440restsux 1 year ago
you should do a video of how to find the right idle if one or both is off... that would be helpful to some ppl, im still having hard time to find how to adjust both equal...
440restsux 1 year ago
F.A.S.T racing sells them
wq1299 1 year ago
what pipes?
nemodapimpfish 1 year ago
all the tool does is test the vacume pressure that the carbs take in when its started. it doesent matter if the airfilter is on.
ErikKlein305 1 year ago
Are you sure ur supposed to let engine run like that without air filter?
Bulgdoom 2 years ago
@Bulgdoom if you dont ride in the dust or anything it shouldnt hurt it.. he's just letting it idle so that he can adjust it..
440restsux 1 year ago
ITS MAde by empi its designed to work on vw motors. you can find them on ebay or search vw carb sync tool.
wesw78 3 years ago
Did anyone find out what that carb sync tool is in the video?
botlfed306 3 years ago
hi man wat s the name of the tool what you are using thanks
dirtybanshee 3 years ago
lol its so good :)
iwanawhityou 3 years ago
wat they hell did u do to get the rear end face up so high?
djlilmikeny 3 years ago
Hey man great vid! Where can I get such a tool!! Searched for it on ebay but hasn't find one like that
naughtyplay 3 years ago