I may predict that your hard work and efforts will go in vain.
Beside of some basic imperfections, as I mentioned in the forum, I believe that if it was possible to harvest energy out of the system with such generator, Mr.Chalkalis would have done it long time ago.
You mentioned the need of using a pulse generator in your post #63 dated from 07-10-2010 (energeticforum - FM Chalkalis gravity system donation)
@W32DEFENDER I'm well aware that this project may not succeed and that failure is part of the equation. I do this as a hobby and learn a lot of building techniques and stimulate my mind even through failure, so I don't think it's all in vain as you put it. And I've been studying this quite some time so I know most of the imperfections already. As far as pulse generator, I have that all planned out as I mentioned making a timing wheel in previous videos. Thanks for you concern and input.
Ya a low RPM generator should be fine but the money.... Maybe you can use your muller generator device as a regular generator on the shaft with some gearing in between. Or winding more coils and make a generator your self.
@knovos I destroyed my Muller generator for this project so I'll have to stick with this generator and put some gearing. I calculated that at 220 RPM on the main shaft with the gearing I have, I can spin the generator to 2000 RPM so that should be sufficient to get some good power.
Dear AeVector,
I may predict that your hard work and efforts will go in vain.
Beside of some basic imperfections, as I mentioned in the forum, I believe that if it was possible to harvest energy out of the system with such generator, Mr.Chalkalis would have done it long time ago.
You mentioned the need of using a pulse generator in your post #63 dated from 07-10-2010 (energeticforum - FM Chalkalis gravity system donation)
best regards
w32
W32DEFENDER 3 months ago
@W32DEFENDER I'm well aware that this project may not succeed and that failure is part of the equation. I do this as a hobby and learn a lot of building techniques and stimulate my mind even through failure, so I don't think it's all in vain as you put it. And I've been studying this quite some time so I know most of the imperfections already. As far as pulse generator, I have that all planned out as I mentioned making a timing wheel in previous videos. Thanks for you concern and input.
AEVector 3 months ago
Ya a low RPM generator should be fine but the money.... Maybe you can use your muller generator device as a regular generator on the shaft with some gearing in between. Or winding more coils and make a generator your self.
knovos 3 months ago
@knovos I destroyed my Muller generator for this project so I'll have to stick with this generator and put some gearing. I calculated that at 220 RPM on the main shaft with the gearing I have, I can spin the generator to 2000 RPM so that should be sufficient to get some good power.
AEVector 3 months ago