I used a 7.4V Lipo and Tamiya mabuchi 540 sport tuned motor with nikko's stock radio/speed control (7.2V)...I think that 11.1V is a very high voltage for your stock speed control..Nice video, regards
mine is 9.6 volts stock 10.82 plus charged 11.1 is 11.8 less short of the 12 volt failure point of the 9.6 volte ese but I will change out the out motor first.
TRUE but Ahhh but there are some e bay add on features that can improve it dramatically. Weight can be reduced,prop changed and motor replaced with something else with water jacket.
These nikko boats are not designed to go fast. Hull is heavy, propeller is slow, and motor overheats at high speed. Better enjoy them for what they are: cheap, reliable, sturdy.
yes an it is very well over built and very very heavy great hull design and gear reduction with 500 can motor.Give me some time to lighten the load and see what it can really do.
this is petorl right?
mariner10rpr 1 year ago
I think that this boat is similiar the Nikko Jet Tornado (540 motor type) but is very slow...Check my video
NikkoVintage 2 years ago
exactly the same set up as mine butt with 9,.6 volts
which means I can put in my 11.1 volt 3800MA lipo in it . Thank you
eustonianboater 2 years ago
I used a 7.4V Lipo and Tamiya mabuchi 540 sport tuned motor with nikko's stock radio/speed control (7.2V)...I think that 11.1V is a very high voltage for your stock speed control..Nice video, regards
NikkoVintage 2 years ago
mine is 9.6 volts stock 10.82 plus charged 11.1 is 11.8 less short of the 12 volt failure point of the 9.6 volte ese but I will change out the out motor first.
eustonianboater 2 years ago
I did not make up the name of the boat. I would say it is more like noisy underpowered boat on ripplesi
eustonianboater 2 years ago
wAVE BREAKER????
look at the waves!!!!!!
man this vid is usenet pollusion!!!
gebiena10 2 years ago
On this one I have not done it, appears to have some sort of c clip type system.Also a metric shaft
eustonianboater 2 years ago
how do you remove a rc boat propeller
affconlol 2 years ago
nope not yet
eustonianboater 2 years ago
woooooww faasst.
darkrocker99 2 years ago
TRUE but Ahhh but there are some e bay add on features that can improve it dramatically. Weight can be reduced,prop changed and motor replaced with something else with water jacket.
After Christmas I may have an improved model.
eustonianboater 3 years ago
These nikko boats are not designed to go fast. Hull is heavy, propeller is slow, and motor overheats at high speed. Better enjoy them for what they are: cheap, reliable, sturdy.
modernmariorc 3 years ago
slow
30GB 3 years ago
yes an it is very well over built and very very heavy great hull design and gear reduction with 500 can motor.Give me some time to lighten the load and see what it can really do.
eustonianboater 3 years ago
man thats lame
mpy6 3 years ago