WARNING: If you are looking for a used motor or transmission do not buy it from Engine and Transmission World located at 2100 College Ave. Suite A Cudahy, Wi. 53110. They are crooks and have been ripping people off for decades. Their engines and transmission are junk but advertise them as clean low mile fully tested and ready to install. Do not believe it. They are under investigation by the Wi. USDOJ & FBI consumer complaints and internet fraud divisions. Low life criminal scum bag con artists
how do you measure the clearence ? im doing mine and i have an idea on how to do it, i have the shim kit that you put it in under the towers of the rocker arms
yes, the lifters are hydrolic but because the comp was changed the rockers had to be shimmed up to corect the clearence. other wize the valves may not close fully.
no man, i havent done the exhust yet.... it idles soo low, it sits at about 300 rpm and lopps down to about 150 so it would sound sweet with pipes and headers you can hear the note is in there but its got the stock exhust on for now. its hard to justify it to the misses right now, im thinking of asking a muffler shop if they would do it in exchange for my brand new snap on torque wrench ?
Your engine looks fuckin good mate, well done! I just rebuilt the 3.5 in my rangie because the rings on number 8 piston decided to let go and eat away at it. It still ran though ! lol Also, the heads look good, especially the exhaust ports from what I can see in the video. Dunno about you but, I enjoy my Land Rover even more now knowing it's my sweat that's powering it. lol
thanks man, when so meny people throw them away when repairs get a bit tuff, it takes a bit of love to do one up, but at least we know whats in them, and who built them. next year when she is in the simpson desert ill know she'll be right.
for sure man, i just droped in a aussie desert cooler radiator last week its the first tripple core ever made by them to be in a discovery. twin elec fans 4000 cfm. im going to pop on a video of it soon. slowly getting it all up to speed to hit the simpson.
Awesome, she should go bloody good out there. You got a full performance exhaust system? Would be lotsa fun to really open her up out there and listen to her roar. Fuck yeah! Lotsa sand lol
WARNING: If you are looking for a used motor or transmission do not buy it from Engine and Transmission World located at 2100 College Ave. Suite A Cudahy, Wi. 53110. They are crooks and have been ripping people off for decades. Their engines and transmission are junk but advertise them as clean low mile fully tested and ready to install. Do not believe it. They are under investigation by the Wi. USDOJ & FBI consumer complaints and internet fraud divisions. Low life criminal scum bag con artists
gotyourtongue 3 months ago
i would pay you to rebuild my disco2 4.0 liter
Fireball69 11 months ago
Good job. That takes patience. The timing chain on my RR just went, so i'm going to have some fun with that. Yippee!!
EnterMyUserNameHere 1 year ago
how do you measure the clearence ? im doing mine and i have an idea on how to do it, i have the shim kit that you put it in under the towers of the rocker arms
Chocokid321 1 year ago
did you set the lifter pre load? on the heads
Chocokid321 1 year ago
yes, the lifters are hydrolic but because the comp was changed the rockers had to be shimmed up to corect the clearence. other wize the valves may not close fully.
uncaljeff 1 year ago
Meticulous, nicely done.
itjstagame 1 year ago
tut, I watched that entire video hoping for the climax of a gorgeous V8 roar and... no such joy!
Get a nice clip of the sound on the end of the video :)
Nice work.
brianhoskins1979 1 year ago
no man, i havent done the exhust yet.... it idles soo low, it sits at about 300 rpm and lopps down to about 150 so it would sound sweet with pipes and headers you can hear the note is in there but its got the stock exhust on for now. its hard to justify it to the misses right now, im thinking of asking a muffler shop if they would do it in exchange for my brand new snap on torque wrench ?
uncaljeff 2 years ago
Hehe yeah, snap on stuff definately aint easy on the wallet.
buggeray 2 years ago
Your engine looks fuckin good mate, well done! I just rebuilt the 3.5 in my rangie because the rings on number 8 piston decided to let go and eat away at it. It still ran though ! lol Also, the heads look good, especially the exhaust ports from what I can see in the video. Dunno about you but, I enjoy my Land Rover even more now knowing it's my sweat that's powering it. lol
Peace out bro
buggeray 2 years ago
thanks man, when so meny people throw them away when repairs get a bit tuff, it takes a bit of love to do one up, but at least we know whats in them, and who built them. next year when she is in the simpson desert ill know she'll be right.
uncaljeff 2 years ago
Simpson desert aye................you gonna shoot a few vids while your out there? Would be good to see.
buggeray 2 years ago
for sure man, i just droped in a aussie desert cooler radiator last week its the first tripple core ever made by them to be in a discovery. twin elec fans 4000 cfm. im going to pop on a video of it soon. slowly getting it all up to speed to hit the simpson.
uncaljeff 2 years ago
Awesome, she should go bloody good out there. You got a full performance exhaust system? Would be lotsa fun to really open her up out there and listen to her roar. Fuck yeah! Lotsa sand lol
buggeray 2 years ago