@mwestcs Yes and now check the official Wikipedia article about this and see it is not faked. Pure Physics... just not what most people would intentionally think when seeing this.
@JokimciusGoras tu teisus , įmetus karštą stiklą į vandienį susidarė mikro įtempimai ir jie pasiliko stikle nes lašas per mažas kad išsprgtų savaime :) vėliau visas reikalas uodegoje , jis tik nulaužė uodegėlę ir to užteko kad išlaisvintų itempimą..
A Prince Rupert's Drop is so strong that you can hammer on one end without causing a crack, but watch out for the other end—it breaks easily and causes the whole thing to explode!
What occurs is that the exterior of the glass cools quickly whereas the interior of the glass cools more slowly. When the interior cools it pulls on the top of the drop so that it becomes more compressed which adds strength to the glass, however, this cooling also has the complete opposite effect on the tail. SO when the tail breaks it causes the entire glass to fracture at more than 4000 mph, hence the explosion. Its all about stresses and tensions in the structure of the glass itself.
I suppose I could have as well. But seeing as no one else was answering the question I figured, being an experienced gaffer, I would explain the phenomenon.
Rupert's drops are one of the very first proximitys to tempered glass, when the molted glass hits the water, the outer layer cools too quickly, causing the still hot inner still molted glass to shrink as it starts to cool down, it pulls the now hard surface and creates a weird tension which causes the structure to spread energy of the impact of a hammer so it won't break if hit on the bulb,
But, when the weak side, the tail, is broken, thousands of microfisures spread through the bubble releasing the tension, hence, it explodes ;) hope it helps
'rear admiral'
divisorplot 1 week ago
Nice name for a luxury liner 'Prince Rubert'.
divisorplot 1 week ago
This looks shopped, I can tell by some of the atoms and seeing quite a few shops in my time.
mwestcs 3 months ago
@mwestcs Yes and now check the official Wikipedia article about this and see it is not faked. Pure Physics... just not what most people would intentionally think when seeing this.
Fuffzehn 2 months ago
The Wadsworth Constant applies.
Hercolicious 3 months ago 13
That's right, ladies and gentlemen. With nothing more than molten glass and ice water, you too can counterfeit cocaine!
NoobOfLore 9 months ago 9
paper muslin ghost
TlR6 11 months ago
imagine that in the shape of a bullet being shot into you.
Spearixx 11 months ago
Amazing
TheRevolutionstarter 1 year ago
I can almost here the Blendtec guy in the background at the end... "Don't breathe this". lol.
yudanielk 1 year ago 6
visas reikalas uodegoje.
JokimciusGoras 1 year ago
@JokimciusGoras tu teisus , įmetus karštą stiklą į vandienį susidarė mikro įtempimai ir jie pasiliko stikle nes lašas per mažas kad išsprgtų savaime :) vėliau visas reikalas uodegoje , jis tik nulaužė uodegėlę ir to užteko kad išlaisvintų itempimą..
stiklas 11 months ago
But, Will It Blend?!?!
RiotousGhost 1 year ago
The best and clearest of the PRD videos I've seen. I've known about these things for decades, but I've never actually seen one break before.
50srefugee 1 year ago
wow 0.0
TigersPrettyBunny 1 year ago
IF you breathe that in you get super powers
bloodjake12 2 years ago 2
Subsequently becoming Glass Man
Alisterhenry 2 years ago
@bloodjake12 *Breaths that in and simply dies* Innocent Bypasser: LOL Look at that poser, he thinks he's glass man!
SiddTheFrickingNayak 1 year ago
Its a good way to make powdered glass, maby for sandpaper or something, or remelting.
trailkeeper 2 years ago
my town is named Princ Rupert.
riedude 2 years ago
@riedude In BC?
denelson83 1 year ago
@denelson83
riedude 1 year ago
That'd be an awesome and easy way to create frit. :D
aramilalpha 2 years ago
My names Rupert and i'm gonna steal your dinner money
JasonVz 3 years ago
HAHA THAT'S SO RANDOM IT'S HILARIOUS
nigelcje 3 years ago
So what would happen if you cooled it in say, liquid nitrogen? A super Rupert's Drop, or a deadly explosion maybe??
squimball 3 years ago 3
don't think so... probably it'd be weaker than an ordinary rupert's drop because then the insides would cool almost as fast as the outsides.
nigelcje 3 years ago
I want to see that explode at 3000FPS!
squimball 3 years ago 3
second!
dylan2106 3 years ago 2
Third!
terongorefiend15 3 years ago 2
Fourth!
LegendSaber 3 years ago
fifth!
frizspin175 3 years ago
sixth
DharokDude 3 years ago
seventh
barbarajmay 3 years ago
ninth
hickler13 3 years ago
tenth
tylerdag99 3 years ago
Eleventh (Tenth really, because hickler13 counts like a retard)
aaronz101 3 years ago 15
seventeen ( because I count like a retard)
AlaskanGenius 2 years ago
Will it Blend????
SirMildredPierce 4 years ago 5
lol! The ending's just the same!
SoManyDumbPeople 3 years ago 2
Those are so awesome......
SasukeDracoNick 4 years ago
Why did it explode......?!!?!?!?!?!?
FilmPA 4 years ago
A Prince Rupert's Drop is so strong that you can hammer on one end without causing a crack, but watch out for the other end—it breaks easily and causes the whole thing to explode!
Goatmon 4 years ago
your comment explains nothing...
djxjam2daz 3 years ago 4
If the tail breaks, the surface tension is released and the surface tension holds it together? I dunno, they have anothervideo on it 0_0
Faeilli 3 years ago
What occurs is that the exterior of the glass cools quickly whereas the interior of the glass cools more slowly. When the interior cools it pulls on the top of the drop so that it becomes more compressed which adds strength to the glass, however, this cooling also has the complete opposite effect on the tail. SO when the tail breaks it causes the entire glass to fracture at more than 4000 mph, hence the explosion. Its all about stresses and tensions in the structure of the glass itself.
aramilalpha 2 years ago
Jeez, I could've copied wikipedia too.
nbrege 2 years ago 6
I suppose I could have as well. But seeing as no one else was answering the question I figured, being an experienced gaffer, I would explain the phenomenon.
aramilalpha 2 years ago
To learn a little more about Rupert's Drops, check out this page on the Museum of Glass website:
museumofglass [dot] org/education/learn-about-glass/exploding-glass-ruperts-drop/
museumofglass 4 years ago 2
???how did it do that???
happypotroast 4 years ago
So cool. I'd love to see one of those up close.
myopicprude 4 years ago
Awesome stuff, thanks for posting
xstatik3 4 years ago
wow what is that!? why does it explode like that!?
drumhighguy 4 years ago
Rupert's drops are one of the very first proximitys to tempered glass, when the molted glass hits the water, the outer layer cools too quickly, causing the still hot inner still molted glass to shrink as it starts to cool down, it pulls the now hard surface and creates a weird tension which causes the structure to spread energy of the impact of a hammer so it won't break if hit on the bulb,
anzhelik 4 years ago 8
But, when the weak side, the tail, is broken, thousands of microfisures spread through the bubble releasing the tension, hence, it explodes ;) hope it helps
anzhelik 4 years ago 23
sweet buddy thanks! you just saved me 3 minutes on google lol
tonton423 4 years ago 3
would the same happen with borosilicate?
MarJo138 2 years ago
Obviously not
Nixta91 2 years ago