how to install amp in your car pt. 4

[MillerFootball]

Smokey!

[NeRdWxA]

Gahh... im just getting a shop to do this.

[anthonyv6612]

helpfull video, thanks G

[mrkittycat110]

does the Turn On Wire, which is blue, that goes behind the deck, will that also shut off my amp when my keys are out of the ignition?

[210peanutswaye]

@mrkittycat110 it depends. make shure the circuit you tap into is HOT IN RUN and not HOT ALL TIMES. That way, the amp will only turn on when ur engine is on and the alternator can charge ur battery. unless u wanna install a switch, but only if you know what youre doing.

[210peanutswaye]

Man's technical terms aint 100 but the skill is there...good looking out trompudo!

[BoogDaKing11]

great video bra

[303embree]

awsome vid, helped alot

[90DB1teggy]

Aight now go light up a blunt kno wat im sayn. Good vid homie

[manuelrodriguezkid]

Thanks for the video very helpful

[DeezNeez01]

Good video homie!

[111somiki111]

Great vid bro very helpful!!!

[TheHardstyleFTW]

Like A Boss! :)

[bigtangsp0ppin]

u got the best cd homi haha .nice vids helped alot bud

[MrJdog1232]

damm dog this really helped out. but only one question. WHY DONT U HAVE A CAPACITOR? i heard if u dont have one, that it will just drain your battery.

[bganightfire]

@MrJdog1232 its true.... but most SUV have a great alternator that does a good job. and the fact the battery thats in there is 2X bigger then car batterys. thats why most people who you see that own a SUV or some type of truck dont need it thats if there kicking up to 2000+ then they will. but this should not be any problem.

[cdj8ocho]

thanks bruh, you really helped and made it so simple, glad i didn't pay $65 to get mine installed.

[mudma8558]

if i do not have a fuse on my main power cable could that prevent my amp from working?

[achaloxxx]

0:04 what the hell was that sound!?

[Sandersb94]

What's that type of subwoofer you use?

[valadezjose47]

Nice bids jus hope u have a alarm on that bitch otherwise u can end up like my dumbass n get every thing stolen and have to buy every thing all over again

[TwiztedDesirez85]

ive heard that using 10 guage wire for the sub wires actually adds about 20-50 db depending on amp settingsn such but still tis the best to use for that n power n grounds try using 0 guage !!!! but gr8 videos .. enjoyed em much

[seocom]

great vid bro

[TheGooster07]

8:09 you know what im sayin.. only using one hand so... yeah! 

[cobhcdr]

some black people are alright. much respect homie.

[brownboi431]

what the song called u played at the end please and thanks man

[bezzle67]

Need to get a rockford amp or something man, it wants it. I remember I had this cheap amp hooked up to my L5 and thing could barely push it. Got a Rockford with 500 rms (still under powering it by about 100) but it hit so good it'd rattle my sunroof! Best part was that I had the bass boost really low on the amp and at 0 on my radio with the sub volume at -5.

[midnite141]

whats the high input thing that is white?

[SSCobaltCrazy]

you definatly want to put a terminal that doesnt leak air if you have it tight

[LivinLoud901]

That Sub Is Screaming For More POWER! 

[rsqizar]

i dont like schoche aluminum wire i have the rcas but going to upgrade for my 15s and 10 6x9s

[Nsx25]

when connecting your speaker wires. you said its positive, neg, positive, neg. Why did you put it both on positive? and How do we hook the wires from the sub woofer to the box from the inside?

[xbox360rocksful]

Awsome vids man I watched all of them you know what you are doing.

[chanzleemccune1]

I got tha same car bro!!!! LOVE this!! haha

[iAppleiTech]

Hey, Please Respond ASAP. Whats does Dual-Voice-Coil mean? And what do Ohms mean?

[Scheiterlein64]

@iAppleiTech Dual voice coil means exactly what it sounds like. It has two voice coils. And ohms is the resistance provided by the sub. Depending on how you wire it that "Ohm Load" will change. Look up Ohms law to learn about it

[Nsx25]

how many inch is your sub? and thanks for the 4 video post!! it was A LOT OF HELP!

[elli196PS3]

@Nsx25 dont you listen its 12"

[Nsx25]

@elli196PS3 I think i missed it because I mainly focused on how to install.

[elli196PS3]

@Nsx25 thats alright :-)

[slotiger19]

great video bro

[junit6767]

awesome videos! thank you!

[mregg911]

cheers bro im defo subscribing

[CopenStraight]

need a bigger amp man 

[taylorearly22]

doing this all tommorrow...this was a great 4 videos! thank you

[fleminem76]

this is what i was lookin for man, u know i'm sain, thanks man, thanks 4 real. In italy i didn't fnd any good video talking about how to biuld an amp. Thanks a lot bro, peace. White C.

[g1andrhone]

what guage wire is the red?

[chrisbrezzy96]

just making sure but the ground wire can screw to a metal inside the car right ?

[MrLJdizzle]

@chrisbrezzy96 Yes it does..

Make sure it's not painted or something.

[XboxHacking101]

@chrisbrezzy96 Yes, the ground wire connected to the amp is to be connected to a bolt somewhere on the chassis of your car. HOWEVER, make sure you sand down the screw ALONG WITH the metal around where the screw and ground wire will connect.

[chick0206]

ey wheres that blue remote wire coming from?

[starmoon1987]

ty for this vid it really helpt me

[FreshDoodle]

YOU KNOW WHAT IM SAYIN?



[robertiese]

@lambo4real How'd you learn all that stuff?

[MW3TricKSh0tZ]

Watched all the parts. Best vid thanks bro

[GORDO2422]

To amp speakers do you do the exact same but hook the speaker wires up insted of sub wires?

[SpartanPride09]

Thanks homeboy, this is the best how to vid on how to connect an amp and sub. I watched the pros do it and they dont even compare to you dawg. Thnks to you, now my shit is rockin.

[caseykllks]

Thanks man! If it wasn't for you I would not have ever been able to install my amp and subs!

[MegaBlUeMuSiC]

thnx bro! this really helped me being a first timer with a sub and amp. i just wanted a little bump in my 2000 vw passat and what i got helps out! couldnt have done it without this tutorial. KUDOS!!!!!!

[almashood]

that's actually sounds good

[Mixdentertainment]

HEY MAN WHATS UR THOUGHT ON OREONS?



[robertiese]

@Mixdentertainment Orions?

[neiljkaz2]

Thanks man I had no idea how to install an amp, but after watching these vids I installed and it sounds great!

[CokenOpi]

haha i like the dog on ur mirror

[XxPICKNTICKxX]

i getting distortion from my speakers i dont know what to do i installed amp and 6 x 9 speakers any idea what to do. i did all what it shows in the video. but when i turn my car on i hear a buzzing sound from my speakers. and also 1 of the speaker is playing music and the other speakers doesnt play that loud compare to the other 1. please some 1 response tell me atleast what i am doing wrong. i bought the cheap shit amp from ebay. and cheap headunit but it has rca red and white in the back thx

[crazyMF921]

@XxPICKNTICKxX On your amp you may have some thing saying LPF or HPF Which is High and Low Power Freq. try messing around with those until you get your preferred amount of BASS Or Voice or until the distortion goes away ...Hope it helps..PS. put the volume to the point where you usually hear it put it to high and it may damage your speakers while your tuning your LPF and HPF

[Emavs33]

SUPER HELPFUL!!! THANKS

[Soccergenious10]

yo check this out i've seen so many tutorials and how tos on hooking up my car system and youv'e been the most help thanks bro.

[lakatu28]

You been so helpful bro...i watched all four parts and I am ready to install my amp. Thank you so much...

[grizzlyluver69]

good shiit

[TreeceThaTruth]

your tutorial was really good i think ima install my own shit now. you made everything look so simple. thanks again. i'll subscribe

[Snowwie88]

Thanks man, for this very well made tutorial.

[lj1394]

good look bruh this helped me save 80$

[stlz07ruby]

9:30 damnnn

[1234JoNaThAnA56789]

NICE MONKEY!

[westcoastbreath]

How do you secure the actual sub? I don't want it rolling all around my trunk

[23tomi23]

T.I. King =)

[DrMattzilla]

thanks so when you bridge you hook both wires to the positives???

[23tomi23]

@DrMattzilla no, in ampifier is says which terminals are to hook up for bridge.

[DrMattzilla]

@23tomi23 thanks I read up a little and it says you usualy hook the positive to the first positive then the negative to the second negative but can change on diff models

[boisavage100]

helped alot about to go install

[chrisbumw]

It helped man, good looks

[chrisbumw]

Yo, I got a question. On my deck there is no remote wire, all I see is the antenna wire which is blue n white. Any idea of what should I do about it? Thanks

[JoeFerris1]

@chrisbumw That should operate and function as the same, I think. It's often referred to as a remote / antenna. Tapping into that wire should work fine for you. If your amp has a light installed to show the remote switching on and off with the ignition, just check it comes on with the ignition, but more importantly, goes off with the ignition. Otherwise you'll end up with a flat battery. Hope this helped.

[AirsoftPwnage1]

straight gucci

[WeRideWiFilms]

This helped soo much thanks a lot man!

[RuneMacer55]

anyone have a count how many times he said "i'm doing this with one hand?" I think 12 or 13 haha.

[gordito707]

very sick im going to try to connect my subwoofers and my amp right not...

[YoshiroNinja]

Great vids. Very descriptive. 10/10.

[jordanxavierprod]

haha i agree with fabes326, should throw a major curveball, maybe not garth brooks, but definatlybarry white or sometin

[samewoody]

what would happen if i dont connect the remote wire?

[Dantedijon]

@samewoody Your amp wont turn on

[samewoody]

@Dantedijon ,great that was my problem but i never got it to turn on at all even when i connected that remote wire.its as if the amp isnt working at all. thanks but i guess i need a new amp

[Dantedijon]

@samewoody try this, unhook your negative first on the battery, then take a small peice of copper wire (probably 2inches) and plug one end in the remote socket and the other in the 12 volt socket. then go hook the negative back on the battery and the amp should automatically turn on because its recieving power from the battery if it dont work, then try turning the car on to see if it cuts on, if that dont work then you probably need a new amp, hope your amp works

[samewoody]

@Dantedijon and keep both the positive connected on the batteries positive and remote connected on the stereo? that wont damage anything?

[Dantedijon]

@samewoody no the remote cable that was connected to the amp you take that out, and you get a little copper wire, and plug it from the remote socket to the 12v socket on the amp, it wont damage anything at all, just unplug the negative so you wont get socked, then when you done pluggin those two things in then plug the negative back on, the amp should automatically cut on, if it still dont work make sure your fuse on your amp didnt go out

[samewoody]

@Dantedijon ,lets say it DOES turn on...do i keep them two connected and leave the remote unpluged?

[Dantedijon]

@samewoody not a good idea, if you want to keep unplugging the remote from the 12v everytime you not using it, if you leave it like that it will stay on 24/7, But if it do work that means you plugged the remote cable on your deck in the wrong place, see what color the remote wire is on your deck in the manual you can look up on google, whatever brand deck you have, so when you turn your car on and it turns the deck on it would also turn the amp on

[samewoody]

@Dantedijon , well, i did what u said and it turned on but when i checked on google the manual to find out the remote wire color it said it was white and blue which is the one i was using all the time. the only way it will turn on is if i keep the remote and 12v connected cause the remote wire from the stereo wont do. i guess i can live with it, u helped alot thanks

[Dantedijon]

@samewoody Damn maybe the remote wire on your stereo is damaged or something, or the wire running from it isnt good idk, well at least your amp work but when you get out the car you gotta remember to unplug the rremote from 12v i would keep the remote socket loose u can pull it out when you done using your amp

[samewoody]

@Dantedijon, having it lose isnt a good idea, imma take the fuse out everytime i turn off the car...easiest way i found. the wire is fine. it must be the stereos wire not making contact inside maybe.

[Dantedijon]

@samewoody Yea thats better, i wonder why its not connecting? Have you tried connecting it to the other wires?

[samewoody]

@Dantedijon, what other wires? anyway if its the stereo ill soon get another its an old panasonic one anyway...

[Dantedijon]

@samewoody Nvm i must be talking about the speaker wire nvm, yea update see if its that stereo

[Dantedijon]

Thanks homie all your. Vids helped me to finally learn how to do that

[LiberalsArePigs]

Hey, lambo4real. I appreciate you taking the time to make these vids. My son and I are going to install his new system in his car today. Would have had a very difficult time without this. BTW you are hilarious to listen too. Not sure if you intended to be so funny, but I was cracking up through all 4 of your vids. Nice job.

[kreebow12]

my sub system has led lights in it how do i hook them up and stuff? the terminal is right under the hook upts of the sub

[zedude02]

Close the fucking door you child!

[510sk8er]

11 people blew their subs because they couldnt install it right

[iluvs2sk8]

what do i do if i dont have thos aux terminals on the back of my stereo faceplate system

[Bigroberto2008]

quick question i had a 400 watt system in my car bridged to a 400watt amp with no problem....but for some reason i hear a small engine grumble in my car when its running do u kno what that may be??? I have replaced the all the wires and everything....but its just a small grumble.

[lukemortlock]

@Bigroberto2008 have you got the RCA cables on the same side as the 12v cable running to the battery?

[Bigroberto2008]

@lukemortlock well no but i do have the remote wire not next to but close to the power cord.......

[lukemortlock]

@Bigroberto2008 yes that might be why, i think the remote cable has to be the opposite too. in this video it shows the RCA and remote on one side, and the power the other. try it, see what happens

[anthony19727]

thanks

[08substi]

DO NOT bridge a 2 ohm sub on a two channel amp

[08substi]

DO NOT bridge a 2 ohm sub on a two channel amp

[nbbulldog88]

awesome

[BonezIsSomajor]

gettin started on my own tomorrow... nice vids

[fabes326]

What would have been sweet if you would have thrown everyone a curve ball, by blasting some Garth Brooks

[nelk041]

Really nice video man very helpful and informative i had no idea what to do but now i can do it by my own..

[DatHawaiianGuy]

Thanks I watched all four parts and installed the amp

[watchJO3Y]

I knew the second you said T.i. i was saying to myself that you should put that song on lol

[Miguelr2600]

You really helped. Thanx s and i suscribed to your channel bro

[bbsmyname]

Most helpful video i have seen! you helped me alot

[Mitchayyy95]

cheers man helped so much

[ithree6mafia]

after watching all these i feel like i went on an adventure with you lol i feel like yay we finally did it! but it was only you :p

[TheDangerousKing]

Thank u bro!

[audiomaster17]

nice video, i got a 15" kicker cvr and 1800w audiopipe class d amp and im gonna hook it up soon thanks to this video!

[volcomstreetsk8er]

hey would it be better to hear/feel the bass if you face the subs towards the seats instead if the trunk? also would it make the trunk not rattle?

[dkpaintballer95]

nice vids man. i have the same sub but type E..

[lilhiphoplvr]

is the remote wire coming from the deck already cut like that then u just attach your remote wire???

[Airbusvsboeing]

Thanx for your videos. I had no idea what i was doing. Because you explained it so well i was able to hook up my one perfectly thanx :) 

[mason382810]

So when I'm connecting the blue and white wire do I cut it completely connect it and then leave the other side to it alone?

[supersanchez1991]

what is the remote wire for? i dont get it

[Jctorange]

@supersanchez1991 its so that the amp knows when to turn on, when you turn the ignition and the deck turns on, it sends a signal through the remote turn on wire to turn on the amp

[supersanchez1991]

@Jctorange alright my boy i got you. hey last night i install my amp and sub in my truck it was a pain on the ass lol it was my first time messing with audio. i am going to make a video hopefully you can see it and tell me what you think

[Jctorange]

@supersanchez1991 ayt yea thats cool. Im doing a whole install tomorow in my 92 honda prelude hopefully runs smooth

[aychmorgan21]

u did that, homie

[alecsx22]

cool tutorial :) thumbs up man :)

[dec0rsote]

i just made an account to coment on this.

and DAMN i thought this was harder.

amma try and install my amp and my 12''s tomorow

thanks u helped me and other peoplee alot ;D

[sonsj14]

Dude your vid was perfect and vivid on how to do it thanks man!!

[jburxxx]

installing my first sub and amp using this video...thanks...

[morganrayjackson]

very good videos i wish i would have found these videos about a month ago i paid 250 dollars to get mine installed i didnt know it would be this easy im running this exact same amp and a 12 inch kicker

[SuzukiRider113]

you are awesome man. little ghetto for sure but you know what your talkin about. saved my life. thanks bro

[XLHypnotic]

he has to have all those air fresheners to hide away that kush smell!

[MrBIGKAK]

haha why is der so many air freshners haha? good vid :D

[Haropimp93]

You make life easy!:)

[johnkwesif]

Nice Video. Pay no attention to negativity because you did not have to take your time to do this. You just saved me money so I am grateful, because I had an appointment to have my stereo and amp installed. Another video help me realize I could do that and this video encouraged me to install my amp. Thanks man!

[foxylady1902]

it was a little bit boring at first, you know how it feels when you have just bought the kit and you want first hand installation intruction, but well done homie, like i said, a little bit borring at the begining, a little bit annoying with your talking, but got the great idea at last.

[mel23jordan]

Great video!!! My amp wiring kit obly came with 2 pira of terminals( 1 for ground and 1 for the battery) do i need a terminal for the remote wire or juat screw down the terminal on the amp like the speaker wire? Someone please helpp! Thanks

[asenn89]

i watched a milion videos on how to do this, and this is the only one that helped me thanks bro nice job

[heavymetalmonkeys1]

how do you hide the rca and remote cables into the back of the dashboard?

[deviation01]

made it through all your vids - good stuff.

[mike62649]

vanillaroma lil trees only way to go haha great video man, much appreciated

[MrTrome]

@somkin42

[MrTrome]

@smoking42 he said its just a started kit and he is getting better shit but this is for the video so stopped being a Dick

[somkin420]

that sony xplod amp is junk get some real shit man ive seen rockford fosgate 250watts amps push harder then that

[zorares]

Very useful information! Thanks for taking the time to educate us!

[XboxDoode]

Thanks so much man, Watched all 4 parts, very helpful. Gonna get subs soon and this was really needed. Awesome tutorial, thanks.

[serdar368]

what makes he whit the radio ? i don't know this !

[rGNinjaBear]

Awesome job

[alexpotter111]

he should of got it installed at Best Buy

[e1r2i3k415]

damn know i know my homie was fucjin up when he did my amp kit, i have to go back and re do it know, thx for the help

[amboyinusa]

Glad I saw your videos. Thanks a lot Bro.

[endust30]

This video was so helpful that i had to long onto my youtube account and give it a thumbs up. Great Job helped so much

[DBbyDesign]

what year is that explorer bro. check out my build they look to be same model color simular year

[ayejay911]

@DBbyDesign he said 95

[VuZeDMoDz]

Best video I've seen for this. Funny how the others had two hands and you had one and you still did better!

[RideZLightnin]

CWANK DEM TUNES!!!!



-This is real helpful dude, way better then most i've seen. but im stuck on one spot, i already did the power cable. I need to put in the RCA cable, but i don't know which wire is the remote wire,