Crosman 1377 multi-pump air pistol - AGR Episode 75

[MuhsinTheMomin]

The one I have was made in 1987. And still shooting solid to this day

[moonieparone]

Thanks Paul,an excellent clip on the 1377!I always assumed Crosman air pistols were so-so til I owned one of these.I have the phase 2 1377,without the breach bolt.The valve had been drilled,for the Canadian or UK market I think,to tone the velocity to under 500fps.I used liquid solder to fill the hole,and its now shooting really hard :)

I use it several times a week,fun,and accurate.I can get bullseyes at 7meters with this pistol :)

[1111flyfish]

Crosman sells a steel breech which has 11 mm dovetails cut into it. It improves accuracy and gives you a stable base for a heavier scope. Those inter mounts are pieces of junk

[NeoAndersonn]

In the end of the video you say to store it with a couple of pumps. How many pumps? only two? Is that really necessary? thank you!

[pyramydair]

@NeoAndersonn

1-2 pumps is enough. It's a good practice that keeps the gun pressurized and ensures long term elasticity of the o-rings.

Thank you,

Pyramyd Air Team

[NeoAndersonn]

@pyramydair Thank you Pyramid Air! :)

[NeoAndersonn]

Hi Paul. I'm converting my 1377 to .22, wich a steel breench. Will it have the same FPS speed than the 1322? Thank you, love your videos!!!

[pyramydair]

@NeoAndersonn

1377 and 1322 will shoot different pellets at different velocities.

Thank you,

Pyramyd Air Team

[NeoAndersonn]

@pyramydair Yes but since I convert it to .22 do you think the converted 1377 will shoot arround 500 fps like the original 1322?

[pyramydair]

@NeoAndersonn

It's hard to say. Please also keep in mind that the velocity will depend on the weight of the pellets you are planning on using.

Thank you

Pyramyd Air Team

[jonnytheninja2R]

@NeoAndersonn: depends. if you put a 24" barrel in it, it will get around 550 fps, 600 or something with a flat top piston.

[NeoAndersonn]

@jonnytheninja2R Thank you :D

[harriet807]

@pyramydair does pyramydair sell the crosman steel breeches?

[harriet807]

@pyramydair also, what advice do you have on using the peep sight, do I have to be close or far away from the rear sight.

[krysks04]

nice review,I will by it for sure!

[Trekkie1961]

Nice to see a review of the good ol' 1337. I have a 20 year old phase 2 that's still going strong. After seeing this video. I'm going to have get a phase 3 and mod the heck out of it.

[MEEP1N]

what pistol is that at :36 in the intro, the blowback? thanks

[pyramydair]

@MEEP1N

What you see at 0:36 is a Beretta PX4 CO2 pistol.

Thank you

Pyramyd Air Team

[ve2vfd]

I bought a first generation 22cal version of this gun when i was a teen (first generation bolt on it) and it's a great gun! Reintroducing the 1322 with the new bolt is going to be niiiice!

[pyramydair]

@ve2vfd

We now have Crosman 1322 in stock. It's BAACK!

[roninpride]

@ve2vfd I boughtthe 1322 on feb 11 and it has a bolt like the 1377.  There are minor cosmetic differences but it is just like my 1377.

[Xbox4lex]

Hi Im thinking about buying some stuff from your website it will cost about 130dollars, how much more money will it cost including the shipment and all that if you ship it to Sweden?

[pyramydair]

@Xbox4lex

When you checkout and enter your shipping address you will see the estimated shipping cost.

Thank you,

Pyramyd Air Team

[kriegmeister3000]

We I was a teenager I had the one with the sliding breech. Wish I still had it. For now I have the new one.

[friskyrabbit]

When I was a kid I remember these didn't have a bolt action but had some weird breach cover you had to turn and slide back to load. I thought back then they were more powerful than 500fps? Or maybe I just thought they were because we used to do stupid fool things like over pump them 20 times? lol

[beastlyepicness]

@Klainapeda i shoot real guns all the time. Its just fun to hunt with pellet guns because its more challenging

[BigDizzad]

Those inter-mounts are only good for a red dot. They WILL NOT hold anything larger than that with the plastic breech. I have a good video showing how to install a steel breech if you want to scope this air gun.

[Madkoifish]

I do not recommend those inter-mounts for anything with any kind of weight. The weight of a scope has a lot of leverage against the transfer port, possibly damaging it or the seal in the pump tube, plastic breech, and messing with POI etc. I suggest getting a steel breech from crossman or a 3rd party seller. These are dovetailed for optics.

I would rather crosman find a better way to mount the breech to the gun or stuff the Marauder pistol/match pistol trigger group in the frame.

[Axbent]

Wish America could make their airguns of higher quality, I do like the designs! RP2012

[Klainapeda]

I think airguns are Good for guys who are scared of Real pistols Or rifles,but i don't like them

[kriegmeister3000]

If I want it in .22 I can just switch the barrel and breech right? Then upgrade both :)

[Madkoifish]

@kriegmeister3000

Barrel and bolt, the breech steel or plastic does not change.

[miketheknife2]

@kriegmeister3000 yep i built a 1322 from a 1377 i just changed the barrel and the bolt to .22 it shoots nice.

[Robocorps2]

I love my 1377c. I bought the shoulder stock and this is my go to fun gun for the back yard and the range. Even my wife likes to shoot it. Please hold an 1322 for me!

[spartencamp]

I hope they do make it in .22 That would make it a great little close range pest gun.

[pyramydair]

@spartencamp

We are expecting a shipment in .22 early this week. You can place a pre-order now if you like.

Thank you,

Pyramyd Air Team

[miketheknife2]

@pyramydair That's good new's i pre-oredered the other day.

[mrwiggles2]

Been waiting a long time for a 1377 video. It's such a great gun it's hard to beat the value and performance.

[MustyM8]

oooooo i might get this:)

[Jesus4Shred]

Happy New Year Pyramydair!

[funboy1231]

Carbean? Wow. I guess it depends where you live, but in Canada we pronounce it "carbine".

[Fordfanforlife777]

@funboy1231 I live in Washington and I do too.

[PaulieCapello]

@funboy1231

Try dictionary.kahm for the proper pronunciation: Kahr-been

Karh-b-eye-n would be incorrect :)